# Mattel Trap mount

**URL:** <https://forum.gbfans.com/t/mattel-trap-mount/5424>\
**Category:** Ghost Traps\
**Created:** [August 9, 2021, 6:55pm UTC](https://forum.gbfans.com/t/mattel-trap-mount/5424 "2021-08-09T18:55:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jakedman21](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/b3f665/32.png) [@jakedman21](https://forum.gbfans.com/u/jakedman21)\
**Post date:** [August 9, 2021, 6:55pm UTC](https://forum.gbfans.com/t/mattel-trap-mount/5424/1 "2021-08-09T18:55:49Z")

</div>

Hello, I recently got a GB2 trap holster, which comes with a standard V hook to connect to the bottom of your trap. Unfortunately I forgot that the bottom of the [Mattel](https://www.gbfans.com/wiki/toys/mattel) trap wasn’t built with mounting equipment in mind. Has anyone found a way to install mounting equipment to the bottom of one?

---

<div class="post-metadata">

**Author:** ![gregday](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/3da27b/32.png) [@gregday](https://forum.gbfans.com/u/gregday)\
**Post date:** [September 8, 2021, 10:43pm UTC](https://forum.gbfans.com/t/mattel-trap-mount/5424/2 "2021-09-08T22:43:43Z")

</div>

I used a regular mounting V hook and just secured it to the trap with screws. I was able to drill a couple of screw holes in the battery door, and also used a bit of super glue to help hold it in place. The clearance with the wheels just barely works out to let the still roll, but also hang on the holster.
