# MMM/ Irricanian's GB fans stunt trap tutorial **URL:** \ **Category:** Tutorials & Guides\ **Created:** [October 13, 2010, 7:28pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173 "2010-10-13T19:28:08Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [October 13, 2010, 7:28pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/1 "2010-10-13T19:28:08Z")
I bought one of AJ’s stunt trap kits for two reasons, 1. I was curious to see what a CNC routered trap kit would look like and how it would go together and 2. I was thinking I would build it, do a tutorial and then auction the finished trap off with the proceeds going to Gilda’s Club (our franchises GB charity) So here goes! Unpacked the contents of the box, here’s what all the components look like ![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_ajkit1.jpg) There are 20 pieces to this raw kit, if you are missing any components you will need to contact the kit supplier before you proceed. Additional parts needed to complete the base assembly are: 1. Suitable handle material (resin cast, wood dowel or PVC pipe) the choice on what to use is up to the buyer.I used a resin piece as thats what i had on hand. Dimensions: 3/4" diameter by 5.375" long [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit25.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit25.jpg) 1. Blocks for mounting your wheel assembly, I cut two pieces of 1/2" square poplar wood to 2.25" long [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit32.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit32.jpg) You will want to drill and tap for the type of axles you will be using to mount your wheels [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit33.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit33.jpg) I drilled 7/32" holes and tapped for the 1/4" bolts I used as axles, you will need to drill/ tap accordingly. You are going to need some basic tools to assemble your trap: Sandpaper (in various grits), drill and drill bits, assorted threaded taps, wood glue , clamps, squared edge file. These are for basic assembly, we will get into finishing later on. **Step 1:** Dry fit all of the parts BEFORE doing any glueing and clamping. you will want to ensure everthing fits together properly and do any needed sanding or filing now. ![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_ajkit3.jpg) ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [October 13, 2010, 7:38pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/2 "2010-10-13T19:38:42Z")
**Step 2:** **Assemble the wheel section** Once you have your two axle supports cut to 2.25" and you have drilled and tapped them accordingly you will want to test fit the wheels to ensure there is ample clearance in the slots. Once you are happy with that you can glue them in place and clamp them. You will install the wheels on final assembly. [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit34.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit34.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit35.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit35.jpg) You can now put this aside until later in the assembly **Step 3:** **\*\*Assemble the trap body. \*\*** The trap handles vertical post fits into the grove in the rear wall of the cartridge, glue the rear wall in place then insert the vertical post [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit5.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit5.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit7.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit7.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit6.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit6.jpg) Once you have this in place you can then attach the side walls [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit8.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit8.jpg) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit9.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit9.jpg) Glue ,clamp and let dry overnight **Step 4:** **Assemble the rear battery box.** Since you already test fitted your parts all you need to do is glue and stack and then clamp in place [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit10.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit10.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit11.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit11.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit12.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit12.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit13.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit13.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit14.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit14.jpg) Let your glue dry overnite before proceeding If you plan on putting electronics into your trap you will want to bolt the battery box lid on instead of glueing it, you can use 5 - #4 or #6 button head Allen bolts for this (your choice), you may also want to drill the holes for a switch and light in the lid. [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit15.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit15.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit39.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit39.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit38.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit38.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit40.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit40.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit41.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit41.jpg) _Builders tip:Place a scrap piece of wood behind when drilling so the MDF doesn’t splinter. You will get a much better result._ [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit43.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit43.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit44.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit44.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit45.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit45.jpg) **Step 5:** **Inner cartridge assembly.** Glue the two inner walls in place [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit19.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit19.jpg) and then the 3 pieces of the front indicator, making sure the parts all sit evenly on all sides. [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit20.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit20.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit23.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit23.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit21.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit21.jpg) You can also glue the [gun ears](https://www.gbfans.com/wiki/equipment/proton-pack/gun-ears) in place ( if adding #6 or #8 bolts (your choice) to the outside of the ears you may want to drill and tap them first for installation of the bolts after painting) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit36.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit36.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit37.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit37.jpg) **Step 6:** **Mount the handle.** I recommend using a #10 x 1 1/4" long Allen bolt to mount the handle.You will want to drill a thru hole in the handle (13/64") and drill and tap for a #10 bolt in your vertical post. (5/32" drill for #10 tap) **Builders Note: Since you are drilling and tapping into the end grain of the MDF be sure you pre-drill the hole to a depth slightly more than you need, MDF splits very easily so be careful when putting in the bolt.** [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit26.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit26.jpg)[![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_ajkit46.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=ajkit46.jpg) **Step 7:** _Remember safety when dealing with dust and paint fumes, wear the proper PPE_ [![image](https://discdn.gbfans.com/original/3X/2/4/249fcc91d240c95527dd7fba0d3d87d7330fb0ba.jpeg)](http://www.gbfans.com/images/pb/multimediamayhem/?action=view¤t=SafetyEquipment.jpg) **Prep for paint.** At this point, once all your glue is dry you will want to do your prep work for painting. Since MDF is pourous you will need to seal it, this can be done in a number of ways. 1. Brush wood glue onto all exposed edges 2. Use wood filler on all exposed edges 3. Shellac or other clear sealer Once you have sanded the wood smooth and sealed it you can go onto priming and then painting. You may need several coats to get good coverage and may also require sanding with finer sandpaper in between coats before you put your finish coat on. Plan ahead for the result you want to acheive. **Once your parts are all painted you can move onto installing your accessories, here’s what you will need:** Cosmetic plating (aluminum or painted styrene) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_th\_015.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_?action=view¤t=015.jpg) Socket cap Allen bolts for mounting plating, resistor, vector plate TBA Vector plate (resin or metal) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_th\_P026.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_?action=view¤t=P026.jpg) [Cal-R](https://www.gbfans.com/wiki/uncategorized/cal-r) resistor [![image]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_th\_P045.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_?action=view¤t=P045.jpg) Side rods ( wood dowel or metal) 1/2" x 3" long [![image]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_th\_P102.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_?action=view¤t=P102.jpg) Foster 22-2 coupler [![image](https://discdn.gbfans.com/original/3X/2/7/2766316ff74ce42f0981d4de0f7f8947bfa5cf06.jpeg)](http://www.gbfans.com/images/pb/multimediamayhem/?action=view¤t=foster22-2.jpg) Light bezel [![image](https://discdn.gbfans.com/original/3X/a/f/af609f8164a79e510657f3912b9a4da21a6cb20b.jpeg)](http://www.gbfans.com/images/pb/multimediamayhem/Traps_?action=view¤t=679-4631.jpg) Switch A SPST or DPDT toggle switch to control your lights Trap knobs [![image]([http://www.gbfans.com/images/pb/multimediamayhem/Resin](http://www.gbfans.com/images/pb/multimediamayhem/Resin) parts\_th\_002-2.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/Resin](http://www.gbfans.com/images/pb/multimediamayhem/Resin) parts\_?action=view¤t=002-2.jpg) [V-hook](https://www.gbfans.com/wiki/equipment/proton-pack/v-hook) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_th\_P005.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_?action=view¤t=P005.jpg) Wheels [![image]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_th\_P123.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/Metal](http://www.gbfans.com/images/pb/multimediamayhem/Metal) parts\_?action=view¤t=P123.jpg) Decals Finished trap, Dec. 8th [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_014.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=014.jpg) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_013.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=013.jpg) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_009.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=009.jpg) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_008.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=008.jpg) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_007.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=007.jpg) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_012.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=012.jpg) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_011.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=011.jpg) [![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_th\_010.jpg)]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_?action=view¤t=010.jpg) ![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_006.jpg) ---
**Author:** ![Filandrius](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/839c29/32.png) [@Filandrius](https://forum.gbfans.com/u/Filandrius)\ **Post date:** [October 13, 2010, 9:29pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/3 "2010-10-13T21:29:29Z")
Now THAT’s how you do it. 🙂 Great job, man. :crunch: ---
**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/187072_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\ **Post date:** [October 13, 2010, 10:32pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/4 "2010-10-13T22:32:04Z")
Great job! ---
**Author:** ![Vincenzo330](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/v/8c91f0/32.png) [@Vincenzo330](https://forum.gbfans.com/u/Vincenzo330)\ **Post date:** [October 13, 2010, 10:33pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/5 "2010-10-13T22:33:17Z")
Awesome job so far! I’m gonna work on mine this weekend, I’m sure I’ll peek back at this. ---
**Author:** ![Crix](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/258eb7/32.png) [@Crix](https://forum.gbfans.com/u/Crix)\ **Post date:** [October 14, 2010, 12:17am UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/6 "2010-10-14T00:17:25Z")
Well done! ---
**Author:** ![Sebastian\_Arms](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/a698b9/32.png) [@Sebastian\_Arms](https://forum.gbfans.com/u/Sebastian_Arms)\ **Post date:** [October 17, 2010, 9:35am UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/7 "2010-10-17T09:35:37Z")
Leave it to the professional to show us how to do it right. Got my kit yesterday and dry fitted it last night. I will start glueing tonight. Cheers Sebastian ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [December 8, 2010, 8:10pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/8 "2010-12-08T20:10:15Z")
2nd post updated Dec 8th Finished trap Overall the kit went together quite easily, the only issues to note were the problems with drilling and tapping into the grain of the MDF where splitting can easily occur. Places to note: square post where round handle mounts, face of front indicator where cosmetic plate mounts to. Due to the nature of MDF the end grain is the weakest point and you need to take extra precautions when drilling and tapping. For this build I used: - - painted styrene cosmetic plating - real [aluminum side rods](https://www.gbfans.com/shop/trap-aluminum-side-rods) and [Cal-R](https://www.gbfans.com/wiki/uncategorized/cal-r) resistor - resin cast vector plate and trap knobs - real Allen bolt hardware used throughout - real roller bearing wheels - real Foster brass 22-2 coupler - real flat profile toggle switch and LED bezel I did replace the rear battery cover with a thinner styrene one, the MDF one made for difficult installation of the switch and the tolerances were a bit tight once painted. Either method can be used with good results. ![image]([http://www.gbfans.com/images/pb/multimediamayhem/GBfans](http://www.gbfans.com/images/pb/multimediamayhem/GBfans) trap kit tutorial\_006.jpg) ---
**Author:** ![Crix](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/258eb7/32.png) [@Crix](https://forum.gbfans.com/u/Crix)\ **Post date:** [December 9, 2010, 5:28am UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/9 "2010-12-09T05:28:35Z")
A few words of advice: The rear box cover (with the switch and indicator) and small metal plates should use size #4 screws instead of the size #6 you recommend. The ears and large metal plates should have #6 instead of #8, as well. Aside from that minor nitpick, the kit turned out pretty ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [December 19, 2010, 7:51pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/11 "2010-12-19T19:51:34Z")
> [@Crix](#): > > A few words of advice: > > The rear box cover (with the switch and indicator) and small metal plates should use size #4 screws instead of the size #6 you recommend. > > The ears and large metal plates should have #6 instead of #8, as well. > > Aside from that minor nitpick, the kit turned out pretty Thanks, I added that info into the tutorial. ---
**Author:** ![NickFame13](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/3bc359/32.png) [@NickFame13](https://forum.gbfans.com/u/NickFame13)\ **Post date:** [December 23, 2011, 7:55pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/12 "2011-12-23T19:55:06Z")
B-E-A-U-TIFUL! Great build! Great looking trap! I’ll be referring back to this, int he future! 🆒 :crunch: ---
**Author:** ![JayStantz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e274bd/32.png) [@JayStantz](https://forum.gbfans.com/u/JayStantz)\ **Post date:** [February 18, 2012, 7:21pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/13 "2012-02-18T19:21:24Z")
Colin, you are one of the more experienced true Ghostheads around here. You’re stuff looks great and thanks for showing us how it’s done. That’s how it’s done! ---
**Author:** ![Jamie\_Riser](https://forum.gbfans.com/user_avatar/forum.gbfans.com/jamie_riser/32/5855_2.png) [@Jamie\_Riser](https://forum.gbfans.com/u/Jamie_Riser)\ **Post date:** [September 16, 2012, 5:12pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/14 "2012-09-16T17:12:53Z")
is it all one piece? ---
**Author:** ![Garvin\_Ghostbuster](https://forum.gbfans.com/user_avatar/forum.gbfans.com/garvin_ghostbuster/32/6039_2.png) [@Garvin\_Ghostbuster](https://forum.gbfans.com/u/Garvin_Ghostbuster)\ **Post date:** [September 16, 2012, 7:06pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/15 "2012-09-16T19:06:30Z")
> [@Jamie Riser](#): > > is it all one piece? Did you not see the first post or are you asking if the trap has a removable cartridge? Sent from my SCH-I500 using Ghostbusters Fans on Android ---
**Author:** ![Heatley2001](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/b3f665/32.png) [@Heatley2001](https://forum.gbfans.com/u/Heatley2001)\ **Post date:** [October 19, 2017, 8:54pm UTC](https://forum.gbfans.com/t/mmm-irricanians-gb-fans-stunt-trap-tutorial/7173/16 "2017-10-19T20:54:48Z")
Im waaaay late to this. Is a kit like this still made? Where i can put it together?