# Moded Spirit Goggles **URL:** \ **Category:** Ecto Goggles\ **Created:** [August 6, 2020, 3:18pm UTC](https://forum.gbfans.com/t/moded-spirit-goggles/17314 "2020-08-06T15:18:27Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![iamroguesniper](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/a6a055/32.png) [@iamroguesniper](https://forum.gbfans.com/u/iamroguesniper)\ **Post date:** [August 6, 2020, 3:18pm UTC](https://forum.gbfans.com/t/moded-spirit-goggles/17314/1 "2020-08-06T15:18:27Z")
Modded the Spirit goggles to look more like the real ones. I used button snaps from Amazon, knobs from gbfans shop, sticker set from Independent1Trading on etsy, and sewed my own strap mounts. (Not very well though) [![image](https://discdn.gbfans.com/original/2X/4/49b5c2487fe95ec77db41d429b7095b27a468421.jpeg)](https://imageshack.com/i/poueepthj)Right side [![image](https://discdn.gbfans.com/original/2X/0/0deaae1ba671e2af3b196d26f8a1043d17c5cf9b.jpeg)](https://imageshack.com/i/pm8jdqmQj)Left side I cut a piece of aluminum to make the lens screw bracket.(Front left lens) Couldn’t find longer thumb screws but close enough. [![image](https://discdn.gbfans.com/original/2X/c/c831ad822c2b3bed94c7d07e807ea9b489657277.jpeg)](https://imageshack.com/i/pmQbNZsuj)Front I replaced the green led in the lens and added one to the other lens. Dimmed them down so I didn’t go blind. I used plastic card and filler to make the raised ring on the front. [![image](https://discdn.gbfans.com/original/2X/a/aa5f3e78c55a9b25edc538ede3e22f45d1adcf9b.jpeg)](https://imageshack.com/i/pmJL3J4xj)Bottom I built a different battery door(the round one) to look more realistic and used a mini push button for the switch. Might mod this to look like the real push/pull switch later. [![image](https://discdn.gbfans.com/original/2X/f/fa2f1d6812236fce02e3b2fdf3d3012ab41bffaa.jpeg)](https://imageshack.com/i/pnjUjHpJj) Top Added a flashing led for effect and to indicate power. [![image](https://discdn.gbfans.com/original/2X/d/da37ee445456e58e87ce68efd24b4c17dd848ad0.jpeg)](https://imageshack.com/i/ponmBhLBj)Right [![image](https://discdn.gbfans.com/original/2X/7/79eea563ec1a2d88ecac453b16a64337ab23bf07.jpeg)](https://imageshack.com/i/po8V7gbkj)Left ---
**Author:** ![ghostengineer](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ghostengineer/32/178888_2.png) [@ghostengineer](https://forum.gbfans.com/u/ghostengineer)\ **Post date:** [August 6, 2020, 6:48pm UTC](https://forum.gbfans.com/t/moded-spirit-goggles/17314/2 "2020-08-06T18:48:00Z")
Wow!! Great job. I love what you’ve done. ---
**Author:** ![BRD\_527](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/ebca7d/32.png) [@BRD\_527](https://forum.gbfans.com/u/BRD_527)\ **Post date:** [August 7, 2020, 2:07pm UTC](https://forum.gbfans.com/t/moded-spirit-goggles/17314/3 "2020-08-07T14:07:04Z")
Wow, very nicely done! :love: Where did you find the thumb screws for the lens’? 😊 ---
**Author:** ![iamroguesniper](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/a6a055/32.png) [@iamroguesniper](https://forum.gbfans.com/u/iamroguesniper)\ **Post date:** [August 8, 2020, 3:22pm UTC](https://forum.gbfans.com/t/moded-spirit-goggles/17314/4 "2020-08-08T15:22:44Z")
Ebay. I believe they were 4mx8. Just looked and you can get them on Amazon. Search for Toolless Thumb Screws. ---
**Author:** ![iamroguesniper](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/a6a055/32.png) [@iamroguesniper](https://forum.gbfans.com/u/iamroguesniper)\ **Post date:** [August 30, 2020, 2:13am UTC](https://forum.gbfans.com/t/moded-spirit-goggles/17314/5 "2020-08-30T02:13:30Z")
[![image](https://imagizer.imageshack.com/v2/480x360q90/922/cG4pUn.jpg)](https://imageshack.com/i/pmcG4pUnj) Finally got around to designing and printing the pull knob. Finally finished the goggles. It’s bigger than I wanted but had to work with the switch I installed. ---
**Author:** ![NotSabbat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/5fc32e/32.png) [@NotSabbat](https://forum.gbfans.com/u/NotSabbat)\ **Post date:** [August 30, 2020, 3:17am UTC](https://forum.gbfans.com/t/moded-spirit-goggles/17314/6 "2020-08-30T03:17:08Z")
I made a 3d model for printing based off of the actual knob used if you want to use it. [https://www.thingiverse.com/thing:3252213](https://www.thingiverse.com/thing:3252213) ---
**Author:** ![iamroguesniper](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/a6a055/32.png) [@iamroguesniper](https://forum.gbfans.com/u/iamroguesniper)\ **Post date:** [September 1, 2020, 4:45pm UTC](https://forum.gbfans.com/t/moded-spirit-goggles/17314/7 "2020-09-01T16:45:00Z")
Nice. I’ll see if I can make it work with my switch. Thanks.