# Mounting electronics on motherboard

**URL:** <https://forum.gbfans.com/t/mounting-electronics-on-motherboard/15505>\
**Category:** Tutorials & Guides\
**Created:** [September 2, 2018, 9:12pm UTC](https://forum.gbfans.com/t/mounting-electronics-on-motherboard/15505 "2018-09-02T21:12:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![lapena77](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/839c29/32.png) [@lapena77](https://forum.gbfans.com/u/lapena77)\
**Post date:** [September 2, 2018, 9:12pm UTC](https://forum.gbfans.com/t/mounting-electronics-on-motherboard/15505/1 "2018-09-02T21:12:00Z")

</div>

What size of screws can I use to mount all electronics, I using electronics form GB fan shop

---

<div class="post-metadata">

**Author:** ![jreverhart](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/91b2a8/32.png) [@jreverhart](https://forum.gbfans.com/u/jreverhart)\
**Post date:** [September 6, 2018, 2:14am UTC](https://forum.gbfans.com/t/mounting-electronics-on-motherboard/15505/2 "2018-09-06T02:14:27Z")

</div>

> [@lapena77 post\_id=4908153 time=1535922720 user\_id=43799](#):
>
> What size of screws can I use to mount all electronics, I using electronics form GB fan shop

Howdy, I used these

[https://www.amazon.com/gp/product/B073ZC6PB9?psc=1&tag=gbfans-discourse-20](https://www.amazon.com/gp/product/B073ZC6PB9?psc=1&tag=gbfans-discourse-20)

and used epoxy putty to attach the risers then used a short riser on the top. I attached all my electronics to the shell, so when i removed it I reduced the risk of yanking on the wires, and easier to line up the lights better. but its a preference but should work the same.

I’ve seen others just use like #6 nuts and bolts to mount aluminum plates and then use risers from there off the board. its really up to you whats easier. I tried to drill as few holes as possible in the MOBO (not including the speaker holes)

Links in this post may be affiliate links. Purchases made through them help support this site at no additional cost to you.

---

<div class="post-metadata">

**Author:** ![lapena77](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/839c29/32.png) [@lapena77](https://forum.gbfans.com/u/lapena77)\
**Post date:** [September 6, 2018, 9:12am UTC](https://forum.gbfans.com/t/mounting-electronics-on-motherboard/15505/3 "2018-09-06T09:12:07Z")

</div>

Thank you
