# Mounting Speaker

**URL:** <https://forum.gbfans.com/t/mounting-speaker/21065>\
**Category:** Proton Packs\
**Created:** [December 8, 2020, 11:42pm UTC](https://forum.gbfans.com/t/mounting-speaker/21065 "2020-12-08T23:42:03Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![slmer](https://forum.gbfans.com/user_avatar/forum.gbfans.com/slmer/32/187589_2.png) [@slmer](https://forum.gbfans.com/u/slmer)\
**Post date:** [December 8, 2020, 11:42pm UTC](https://forum.gbfans.com/t/mounting-speaker/21065/1 "2020-12-08T23:42:03Z")

</div>

Originally, I had my speaker mounted on the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard). But, now that I have a Spengler plate I feel like there are too many holes near the Anovos vent. I was thinking of using 4 hex bolts and securing them with resin to the pack. Included picture for reference. The hex bolts would be straightened. Just wondering if this is a bad idea and if this would ruin the speaker over time.

[![image](https://discdn.gbfans.com/original/3X/5/3/530bc8d7451c84a6ed78983c308dee25e1ec40d5.jpeg)](https://ibb.co/DtFr2ZW)

---

<div class="post-metadata">

**Author:** ![Rvonvolen](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/9de053/32.png) [@Rvonvolen](https://forum.gbfans.com/u/Rvonvolen)\
**Post date:** [December 9, 2020, 2:15am UTC](https://forum.gbfans.com/t/mounting-speaker/21065/2 "2020-12-09T02:15:27Z")

</div>

Hmm, I don’t even think I’d trust the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) that comes with the Anovos kit. I would personally buy or make a new board, but if you want to keep that one them maybe seal up your old holes and mount it somewhere towards the middle or the top. Hope this helps you out!

---

<div class="post-metadata">

**Author:** ![slmer](https://forum.gbfans.com/user_avatar/forum.gbfans.com/slmer/32/187589_2.png) [@slmer](https://forum.gbfans.com/u/slmer)\
**Post date:** [December 11, 2020, 2:15am UTC](https://forum.gbfans.com/t/mounting-speaker/21065/3 "2020-12-11T02:15:11Z")

</div>

I’m not a fan of it either. However, it is my first [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) and there were a lot of trial and error situations. I do eventually plan to replace the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) all together.

I’ve sealed up the old holes. If I were to mount it the way in the picture, would the metal interfere with the speaker? I’ll probably end up mounting it somewhere else on the motherboard.
