# My 3d printed pack

**URL:** <https://forum.gbfans.com/t/my-3d-printed-pack/16126>\
**Category:** Proton Packs\
**Created:** [September 14, 2018, 5:02pm UTC](https://forum.gbfans.com/t/my-3d-printed-pack/16126 "2018-09-14T17:02:23Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![BennyBassline](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/ecae2f/32.png) [@BennyBassline](https://forum.gbfans.com/u/BennyBassline)\
**Post date:** [September 14, 2018, 5:02pm UTC](https://forum.gbfans.com/t/my-3d-printed-pack/16126/1 "2018-09-14T17:02:23Z")

</div>

So after many years of wanting one it was now the right time having learnt the basics of 3d printing and completing other successful projects.

I downloaded some files and got to work just using bits off scrap rolls of filament I had laying about

I wasn’t happy with the print quality on a few of the [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) bits so I have since reprinted them

This is just a lose mock up to make sure all fits nice even though I put the cyclotron bits in wrong place 😕

I have ordered and received the pack light kit and sound board from gbfans and have the light and sound kit for the wand in the post.

I managed to find a lc2 frame cheap on eBay and that has now arrived

I bought some overalls I wasn’t impressed with so found a cwu27p [flight suit](https://www.gbfans.com/wiki/equipment/uniform) and that arrived this morning, a little tight but I’m on a mission to shed some weight and lost 14lbs already in 2 weeks 🙂

I have the elbow pads, belt and gloves also so I’m pretty much on my way in the build 🙂

 ![image](https://discdn.gbfans.com/original/3X/b/7/b74f7d2e1ff4a69f6779d2bc13fbccaaed1cc469.jpeg) ![image](https://discdn.gbfans.com/original/3X/d/f/dfba3e1b8a99fac8d1410d97abceb79c255d83dc.jpeg)

---

<div class="post-metadata">

**Author:** ![scarbs](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/8edcca/32.png) [@scarbs](https://forum.gbfans.com/u/scarbs)\
**Post date:** [September 28, 2018, 12:06am UTC](https://forum.gbfans.com/t/my-3d-printed-pack/16126/2 "2018-09-28T00:06:15Z")

</div>

Look Great man. I too am starting a 3D kit. buddy of mine has some big printers so he ran me the Dancing Fool parts.

Question is there no mother board in your pic. I was thinking of getting an Aluminum one.

---

<div class="post-metadata">

**Author:** ![Halomobilo](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/958977/32.png) [@Halomobilo](https://forum.gbfans.com/u/Halomobilo)\
**Post date:** [November 9, 2018, 2:11pm UTC](https://forum.gbfans.com/t/my-3d-printed-pack/16126/3 "2018-11-09T14:11:40Z")

</div>

Looking good and looking forward to updates. I think that I am also doing the same pack as you from Thingivese (Miley O’riley?) and am having great fun printing and finishing mine although it is taking a bit longer than I planned, but never mind 🙂 If you are doing the Miley O’riley pack, I remixed the top part of the [Booster Tube](https://www.gbfans.com/wiki/equipment/proton-pack/booster-tube) to add a recess. I just eyeballed it really but I’m pleased with how it turned out.

> **[Booster Tube With Recess by JimmyTheKidd78](https://www.thingiverse.com/thing:3079876)**
>
> I've printed MileyORiley's Proton Pack and am working on finishing it at the moment. It's an awesome design and is slightly reduced in size (it's 90% scale) which is perfect for me as I'm quite short.This Thing goes with this design -...

I’ll have to start a thread for my pack at some point as maybe that will gee me up a bit to get it done. Keep up the good work 🙂

---

<div class="post-metadata">

**Author:** ![nastynoah](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/4af34b/32.png) [@nastynoah](https://forum.gbfans.com/u/nastynoah)\
**Post date:** [November 9, 2018, 3:18pm UTC](https://forum.gbfans.com/t/my-3d-printed-pack/16126/4 "2018-11-09T15:18:51Z")

</div>

Looks great! I 3D printed a lot of the parts on my pack but just used PVC pipe for all the tube parts. Much faster and stronger.

---

<div class="post-metadata">

**Author:** ![Krypton\_Son](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/e5b9ba/32.png) [@Krypton\_Son](https://forum.gbfans.com/u/Krypton_Son)\
**Post date:** [November 9, 2018, 7:01pm UTC](https://forum.gbfans.com/t/my-3d-printed-pack/16126/5 "2018-11-09T19:01:12Z")

</div>

Wow, very nice. Congrats on the weight loss too.

---

<div class="post-metadata">

**Author:** ![ghostengineer](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ghostengineer/32/178888_2.png) [@ghostengineer](https://forum.gbfans.com/u/ghostengineer)\
**Post date:** [December 31, 2018, 8:01pm UTC](https://forum.gbfans.com/t/my-3d-printed-pack/16126/6 "2018-12-31T20:01:39Z")

</div>

A y progress to this build? Would love to see more

---

<div class="post-metadata">

**Author:** ![BennyBassline](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/ecae2f/32.png) [@BennyBassline](https://forum.gbfans.com/u/BennyBassline)\
**Post date:** [October 31, 2019, 12:25pm UTC](https://forum.gbfans.com/t/my-3d-printed-pack/16126/7 "2019-10-31T12:25:58Z")

</div>

sadly the build had to go on hold for nearly a year due to commitments and family but have started again although have a huge issue with the electronics which i dont see being resolved anytime soon 😕
