# My belt circuit gizmo build so far

**URL:** <https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542>\
**Category:** Fan Props\
**Created:** [March 1, 2008, 7:20pm UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542 "2008-03-01T19:20:42Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![loly2kn2](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/51bf81/32.png) [@loly2kn2](https://forum.gbfans.com/u/loly2kn2)\
**Post date:** [April 14, 2008, 9:57pm UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/21 "2008-04-14T21:57:08Z")

</div>

Even if its on letter sized paper, you should be fine to print on A4, aslong as you dont rescale it it should be fine. I’ll try and print this off soon and give it a go!! Looks very good BTW!

Lawrence

---

<div class="post-metadata">

**Author:** ![Jairus](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/9de0a6/32.png) [@Jairus](https://forum.gbfans.com/u/Jairus)\
**Post date:** [April 15, 2008, 9:41am UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/22 "2008-04-15T09:41:23Z")

</div>

Nope, it’s not A4. Just 8"x10", but printing it without scaling will work fine on most printers. It looks like crap in the web preview, but it looks fine once printed. 😉

I completely overlooked the different black chips, but it’s been updated for those. Also added more of the white chips for more room for customization. 🙂

---

<div class="post-metadata">

**Author:** ![tobiasjenn](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tobiasjenn/32/322_2.png) [@tobiasjenn](https://forum.gbfans.com/u/tobiasjenn)\
**Post date:** [September 8, 2008, 4:35pm UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/23 "2008-09-08T16:35:22Z")

</div>

nice board btw…im in the process of getting the materials together for mine and i was just wondering what you made the slopping board out of and what were the measurements for it?

---

<div class="post-metadata">

**Author:** ![Gixer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/278dde/32.png) [@Gixer](https://forum.gbfans.com/u/Gixer)\
**Post date:** [September 8, 2008, 8:03pm UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/24 "2008-09-08T20:03:47Z")

</div>

It’s just the white styrene board from a model shop, but sprayed black. Measurements are as follows:

Width is same as the widest part of the circuit board. Sloping side supports are 1" high at the tallest part, 0.5" at the lowest, and 1.4" wide. Make the Nixie Tube piece that sits atop fit these dimensions and you’re away…

---

<div class="post-metadata">

**Author:** ![tobiasjenn](https://forum.gbfans.com/user_avatar/forum.gbfans.com/tobiasjenn/32/322_2.png) [@tobiasjenn](https://forum.gbfans.com/u/tobiasjenn)\
**Post date:** [September 8, 2008, 9:09pm UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/25 "2008-09-08T21:09:30Z")

</div>

awesome! thanks so much i can’t wait to get started

---

<div class="post-metadata">

**Author:** ![Vinster](https://forum.gbfans.com/user_avatar/forum.gbfans.com/vinster/32/5917_2.png) [@Vinster](https://forum.gbfans.com/u/Vinster)\
**Post date:** [September 16, 2008, 5:40pm UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/26 "2008-09-16T17:40:46Z")

</div>

That is a really nice job! I recently modified one I got from Kruezeman, but it was a sort of “work with what I got” modification. Yours looks excellent. You should be proud!

---

<div class="post-metadata">

**Author:** ![Governor](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/df788c/32.png) [@Governor](https://forum.gbfans.com/u/Governor)\
**Post date:** [October 11, 2008, 3:26pm UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/27 "2008-10-11T15:26:24Z")

</div>

This is a cool idea… to print off the image and then use that to make a replica. very cool!

---

<div class="post-metadata">

**Author:** ![solochaser](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/c5a1d2/32.png) [@solochaser](https://forum.gbfans.com/u/solochaser)\
**Post date:** [October 17, 2008, 1:55am UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/28 "2008-10-17T01:55:41Z")

</div>

Anyone have the smaller chip the big one connects to on file? i want to make it as accurate as possible using this technique.

---

<div class="post-metadata">

**Author:** ![enchanted\_unicorn](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/c2a13f/32.png) [@enchanted\_unicorn](https://forum.gbfans.com/u/enchanted_unicorn)\
**Post date:** [October 17, 2008, 3:00am UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/29 "2008-10-17T03:00:40Z")

</div>

this beats the hell out of mine. if yours is a corvette, then mine is a kia or a daewoo or something to that effect. shoot, maybe a ten speed.

---

<div class="post-metadata">

**Author:** ![Governor](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/df788c/32.png) [@Governor](https://forum.gbfans.com/u/Governor)\
**Post date:** [October 17, 2008, 4:40am UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/30 "2008-10-17T04:40:23Z")

</div>

This is amazing!

---

<div class="post-metadata">

**Author:** ![EctoDevil](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/cab0a1/32.png) [@EctoDevil](https://forum.gbfans.com/u/EctoDevil)\
**Post date:** [February 12, 2009, 6:45am UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/31 "2009-02-12T06:45:47Z")

</div>

Gixer and Tellwhy - You guys rock.

Been working on a [belt gizmo](https://www.gbfans.com/wiki/equipment/uniform/calculator-circuit-board) and this thread just gave me a new route!

:crunch:

---

<div class="post-metadata">

**Author:** ![Gixer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/278dde/32.png) [@Gixer](https://forum.gbfans.com/u/Gixer)\
**Post date:** [February 13, 2009, 7:35am UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/32 "2009-02-13T07:35:29Z")

</div>

Post some pics then 😉

---

<div class="post-metadata">

**Author:** ![EctoDevil](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/cab0a1/32.png) [@EctoDevil](https://forum.gbfans.com/u/EctoDevil)\
**Post date:** [February 13, 2009, 5:36pm UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/33 "2009-02-13T17:36:30Z")

</div>

> [@Gixer](#):
>
> Post some pics then 😉

As of right now I just have a [tape measure holder](https://www.gbfans.com/wiki/equipment/uniform/tape-measure-holder) that I painted black. Gonna go shopping today though! 😁

---

<div class="post-metadata">

**Author:** ![lordgilpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/lordgilpin/32/3982_2.png) [@lordgilpin](https://forum.gbfans.com/u/lordgilpin)\
**Post date:** [July 17, 2009, 2:07am UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/34 "2009-07-17T02:07:33Z")

</div>

Just bumping this thread because I LOVE it- I used the PDF file Jairus made up and am super excited!

---

<div class="post-metadata">

**Author:** ![Gixer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/278dde/32.png) [@Gixer](https://forum.gbfans.com/u/Gixer)\
**Post date:** [July 17, 2009, 9:13am UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/35 "2009-07-17T09:13:41Z")

</div>

My gizmo is still going strong after many troops - the rack that holds the Nixies on came loose at one event but good old Gaffa tape sorted it until I could re-glue 😃

---

<div class="post-metadata">

**Author:** ![lordgilpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/lordgilpin/32/3982_2.png) [@lordgilpin](https://forum.gbfans.com/u/lordgilpin)\
**Post date:** [July 17, 2009, 3:23pm UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/36 "2009-07-17T15:23:23Z")

</div>

> [@Gixer](#):
>
> My gizmo is still going strong after many troops - the rack that holds the Nixies on came loose at one event but good old Gaffa tape sorted it until I could re-glue 😃

In my opinion, your Gizmo build will never be beat… Thanks for sharing this!

---

<div class="post-metadata">

**Author:** ![lordgilpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/lordgilpin/32/3982_2.png) [@lordgilpin](https://forum.gbfans.com/u/lordgilpin)\
**Post date:** [October 26, 2009, 3:23am UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/37 "2009-10-26T03:23:53Z")

</div>

Following your method:

![image](http://www.gbfans.com/images/pb/lordgilpin/BeltGizmo02.jpg)

It had it’s first trial run last night at a Halloween party and I caught the rack that holds the Nixies on a chair. Superglued right back on and it survived the rest of the night! Thanks again!

---

<div class="post-metadata">

**Author:** ![Gixer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/278dde/32.png) [@Gixer](https://forum.gbfans.com/u/Gixer)\
**Post date:** [October 26, 2009, 6:11pm UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/38 "2009-10-26T18:11:41Z")

</div>

Very very well made that one is, at least as good as mine 😉 Thumbs up 🕶

---

<div class="post-metadata">

**Author:** ![FeinDTacticS](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/7ea924/32.png) [@FeinDTacticS](https://forum.gbfans.com/u/FeinDTacticS)\
**Post date:** [February 3, 2010, 8:43pm UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/39 "2010-02-03T20:43:49Z")

</div>

> [@Jairus](#):
>
> Not meaning to hijack at all, but I made a PDF for myself to start on one of these using Gixer’s awesome method, and thought I’d share with anyone who might want it.
> 
> [http://www.jairuswhitley.com/files/beltcircuit.pdf](http://www.jairuswhitley.com/files/beltcircuit.pdf)
> 
> Printed out, this should give you all the images for 2 boards. I color-shifted parts of the board to match the brown boards I’ve seen in photos. I cleaned up and redrew the tops of the chips and included those with it as well. I also extrapolated measurements on the riser piece at the top of the board from the photos posted of actual boards and Exoray’s measurements to give you a template for that piece. Enjoy. 🙂

Jarius… YOU ARE THE MAN …

That .pdf just saved me like at least 5 hours of work…

I wish I could hug you right about now…

(gets back to work)

---

<div class="post-metadata">

**Author:** ![Gixer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/278dde/32.png) [@Gixer](https://forum.gbfans.com/u/Gixer)\
**Post date:** [February 4, 2010, 12:32am UTC](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542/40 "2010-02-04T00:32:25Z")

</div>

Nice one 😃

[Previous page](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542.md?page=1)

[Next page](https://forum.gbfans.com/t/my-belt-circuit-gizmo-build-so-far/10542.md?page=3)
