# My Ecto-goggles so far \* NEW PICS ADDED 2-24-09 \* **URL:** \ **Category:** Ecto Goggles\ **Created:** [February 2, 2009, 5:15am UTC](https://forum.gbfans.com/t/my-ecto-goggles-so-far-new-pics-added-2-24-09/21842 "2009-02-02T05:15:42Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![batmakko](https://forum.gbfans.com/user_avatar/forum.gbfans.com/batmakko/32/6020_2.png) [@batmakko](https://forum.gbfans.com/u/batmakko)\ **Post date:** [February 2, 2009, 5:15am UTC](https://forum.gbfans.com/t/my-ecto-goggles-so-far-new-pics-added-2-24-09/21842/1 "2009-02-02T05:15:42Z")
Pretty common construction, PVC pipe fittings braising goggles. I got the knobs today so I have not had the chance to add them yet. I did use E-6000 adhesive. It has a good bond and there was no fogging in the lense. I will make a new head strap as well ![image](https://discdn.gbfans.com/original/3X/1/a/1ac87f3af46b0e78ad3aca023669452f0ccf4a91.jpeg) ![image](https://discdn.gbfans.com/original/3X/e/f/ef9d6a01cb9d31e75edde4032e5a394cae10a492.jpeg) ![image](https://discdn.gbfans.com/original/3X/e/7/e7431a0cfdd34040eaa4be19adecbac60175420a.jpeg) I decided to leave the longer lense all black, I started another pair that I plan on painting the goggles all black and ill make a aluminum eye piece. Both sets of goggles will have weathering done to them as well John ---
**Author:** ![Boomerjinks](https://forum.gbfans.com/user_avatar/forum.gbfans.com/boomerjinks/32/128_2.png) [@Boomerjinks](https://forum.gbfans.com/u/Boomerjinks)\ **Post date:** [February 3, 2009, 7:12pm UTC](https://forum.gbfans.com/t/my-ecto-goggles-so-far-new-pics-added-2-24-09/21842/2 "2009-02-03T19:12:51Z")
Paint them… PAINT THEM! ---
**Author:** ![Krenzy](https://forum.gbfans.com/user_avatar/forum.gbfans.com/krenzy/32/5873_2.png) [@Krenzy](https://forum.gbfans.com/u/Krenzy)\ **Post date:** [February 3, 2009, 7:24pm UTC](https://forum.gbfans.com/t/my-ecto-goggles-so-far-new-pics-added-2-24-09/21842/3 "2009-02-03T19:24:16Z")
Just curious, are all these goggles the soft rubber material? I’ve been looking for some and all the hardware stores around here have a very smiliar (if not the same) style, but they’re a bendable rubber material. Is this right? ---
**Author:** ![Zack](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/z/f6c823/32.png) [@Zack](https://forum.gbfans.com/u/Zack)\ **Post date:** [February 3, 2009, 7:32pm UTC](https://forum.gbfans.com/t/my-ecto-goggles-so-far-new-pics-added-2-24-09/21842/4 "2009-02-03T19:32:56Z")
That’s right…^^^ There is some tips in painting them at the top of the Goggle forum I believe. ---
**Author:** ![bradboss12](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/a88e4f/32.png) [@bradboss12](https://forum.gbfans.com/u/bradboss12)\ **Post date:** [February 3, 2009, 8:19pm UTC](https://forum.gbfans.com/t/my-ecto-goggles-so-far-new-pics-added-2-24-09/21842/5 "2009-02-03T20:19:13Z")
good, because I got a donation of the rubbery ones and I’m afraid the paint will crack off. ---
**Author:** ![batmakko](https://forum.gbfans.com/user_avatar/forum.gbfans.com/batmakko/32/6020_2.png) [@batmakko](https://forum.gbfans.com/u/batmakko)\ **Post date:** [February 24, 2009, 12:38pm UTC](https://forum.gbfans.com/t/my-ecto-goggles-so-far-new-pics-added-2-24-09/21842/6 "2009-02-24T12:38:50Z")
Well I painted the goggles. I tried using india ink but did not like the final results. I dusted them with Krylon Fusion ultra flat OD green. Then sprayed them with Plasti-dip. The goggles will not hold the plasti- dip without the krylon. It will rub off but it does take a real rubbing to get it to peel. When I sprayed then it was cold and they did wrinkle a bit on the side I plan on still making a new strap and I will make a pad for the edge ( will make them a bit more comfortable to wear ) still need to add knobs as well ![image](https://discdn.gbfans.com/original/3X/e/c/ec53a3698f5bc980dedaecd69ff92de176c9b7a8.jpeg) ![image](https://discdn.gbfans.com/original/3X/4/a/4af83723c447994ead4ea373358b95d43f0d7b21.jpeg) ![image](https://discdn.gbfans.com/original/3X/5/5/5591a12542c064e4e4201bd9cd8ccf44079a2fd9.jpeg) John