# My Gigameter - 3D printed **URL:** \ **Category:** Giga Meters\ **Created:** [December 22, 2015, 10:22am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710 "2015-12-22T10:22:53Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [December 22, 2015, 10:22am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/1 "2015-12-22T10:22:53Z")
hi Guys I want to show you my build of my new Gigameter… Here we go: ok first i´ve isolated and remixed the accurate gigameter sound from the GB2 blueray. https://www.youtube.com/embed/Jo2ibmoIb08?feature=oembed&wmode=opaque done. now, let´s start printing. YEAH, ive founded some really nice parts in ebay. 😃 ok, here is the domeframe. designed in 3d. this is the motor to rotate the inner dome. now i designed a holder for the motor and the domes. here is the first rotationtest. > **[\- YouTube](https://www.youtube.com/watch?v=https:%2F%2Fyoutu.be%2FaAxsT9PE9vw)** > > Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube. some electronic parts arrived today 🙂 reading, reading, reading 😃 and the servotest. there is still a small delay in the animation. ill check the code… https://www.youtube.com/embed/fkh6pmVrUwc?feature=oembed&wmode=opaque and here comes the seconed rotationtest. looks much better 🙂 https://www.youtube.com/embed/tcsbXnN0hW0?feature=oembed&wmode=opaque the printed inner dome with the acrylic rod, to make some lenses. a long time later. the microphone has arrived… time to take a screwdriver 😉 and the next steps. looks good… moving microphones… https://www.youtube.com/embed/xdhuOTJb_xc?feature=oembed&wmode=opaque ok, time to program the soundchip… i used a WT588D 16p chip for this. its gluing-time i missed this small plates on the handle. so i printed some, heaten it in the oven and bend it over the glued handle 🙂 YEAH… love it its time to finished the handle with some real details 😉 its soldertime. my first selfmade soundboard to hold the soundchip 🙂 AAAAND it works 😉 and painted. yesterday i have added a motor extension for the inner dome. and the finished soundchip. i have produced a custom startup sound for the gigameter. its a mix of the protonpack-startup and a few sounds from my soundlibrary 🙂 https://www.youtube.com/embed/gOe6A6uILyM?feature=oembed&wmode=opaque thats all. ill keep you up to date in the next days… ---
**Author:** ![Croker](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/f0a364/32.png) [@Croker](https://forum.gbfans.com/u/Croker)\ **Post date:** [December 22, 2015, 11:40am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/2 "2015-12-22T11:40:13Z")
Hello Dave, I’ve been following your progress on Ben’s FB page. Seriously impressed, keep up the good work. ---
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [December 22, 2015, 12:09pm UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/3 "2015-12-22T12:09:38Z")
Thanks man 🙂 ---
**Author:** ![ThrowingChicken](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/46a35a/32.png) [@ThrowingChicken](https://forum.gbfans.com/u/ThrowingChicken)\ **Post date:** [December 22, 2015, 11:44pm UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/4 "2015-12-22T23:44:20Z")
Ha, love the ears. Now I feel like I over engineered! ---
**Author:** ![Tyrael](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a6a055/32.png) [@Tyrael](https://forum.gbfans.com/u/Tyrael)\ **Post date:** [December 24, 2015, 3:47am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/5 "2015-12-24T03:47:56Z")
I may be biased saying this, but that’s one beautiful [giga meter](https://www.gbfans.com/wiki/equipment/giga-meter)! 😃 ---
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [December 25, 2015, 9:37pm UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/6 "2015-12-25T21:37:22Z")
ok guys. here are a few updates about my gigameter… i got a LM386 amp to boost the gigametersoundchip. tomorrow ill try it… i begun to solder the domelightning… i used 4 very very bright leds (140.000mcd) they are sooo bright 😮 and im soldered a small SMD button to play the sound and start the animations… ---
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [December 25, 2015, 9:40pm UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/7 "2015-12-25T21:40:27Z")
i recorded a new video of the domerotation. there are much updates about the motorholder and domeframe. im very happy with that… https://www.youtube.com/embed/6bwsZTCKpf4?feature=oembed&wmode=opaque ---
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [December 25, 2015, 9:45pm UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/8 "2015-12-25T21:45:09Z")
holy ■■■■. 😮 by pure chance i found the FIRST pictures of the screen used [giga meter](https://www.gbfans.com/wiki/equipment/giga-meter) display in my “ultimate visual history” book… i never thought that they used a “SCAN” lightning… to cut a long story short i begun to remodeling the 3d display… now it should be more accurate… lets print it 🙂 I’m curious about it… ---
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [December 26, 2015, 10:18am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/9 "2015-12-26T10:18:03Z")
Here is the new screenaccurate display… The difference is big 😮 ![image](https://www.dropbox.com/s/d94ginp1i4pog53/59.jpg?dl=0) ---
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [December 28, 2015, 9:23am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/10 "2015-12-28T09:23:49Z")
Here is a new update of my gigameter. I got this idea of the lightanimation (stripes during the rotation) tonight Its so crazy… I covered a few lenses with black tape inside the dome and programmed the arduino to make a strobe effect This gives you an illusion of stripes and slowly rotation… I still need to coloring somes lenses to red and green… https://www.youtube.com/embed/GLAGcrpet0U?feature=oembed&wmode=opaque ---
**Author:** ![Croker](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/f0a364/32.png) [@Croker](https://forum.gbfans.com/u/Croker)\ **Post date:** [December 28, 2015, 10:36pm UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/11 "2015-12-28T22:36:21Z")
Fantastic stuff matey, looks really cool. Keep the updates coming. 😃 ---
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [December 29, 2015, 8:50am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/12 "2015-12-29T08:50:15Z")
thanks man 🙂 ive improved the microphone-movement. its more stable and has a smoother movement… https://www.youtube.com/embed/m45eJLMhCQA?feature=oembed&wmode=opaque ---
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [January 4, 2016, 1:37pm UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/13 "2016-01-04T13:37:12Z")
hi guys here is a new update about my gigameter built. the first soundtest. https://www.youtube.com/embed/lUDmKhXNy7Q?feature=oembed&wmode=opaque ---
**Author:** ![kingpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kingpin/32/188026_2.png) [@kingpin](https://forum.gbfans.com/u/kingpin)\ **Post date:** [January 4, 2016, 3:41pm UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/14 "2016-01-04T15:41:54Z")
Impressive work on the lights, sounds and ears. 🙂 ---
**Author:** ![wishbone](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/w/eb9ed0/32.png) [@wishbone](https://forum.gbfans.com/u/wishbone)\ **Post date:** [January 4, 2016, 4:43pm UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/15 "2016-01-04T16:43:58Z")
Incredible work, it constantly amazes me what these 3d printers can do. I definitely need to pick one up, I just keep waiting for that “next generation” one to come out. ---
**Author:** ![d\_osborn](https://forum.gbfans.com/user_avatar/forum.gbfans.com/d_osborn/32/179392_2.png) [@d\_osborn](https://forum.gbfans.com/u/d_osborn)\ **Post date:** [January 5, 2016, 2:21am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/16 "2016-01-05T02:21:59Z")
It warms my GB2-defending heart that the Giga is getting so much love from prop builders! Keep up the awesome work, man! This really makes me jazzed to build my Throwing Chicken kit! ---
**Author:** ![Venkmans\_Swagger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/v/6bbea6/32.png) [@Venkmans\_Swagger](https://forum.gbfans.com/u/Venkmans_Swagger)\ **Post date:** [January 5, 2016, 6:43am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/17 "2016-01-05T06:43:54Z")
Oh how I love this build!! You’re GB2 prop collection is getting more and more impressive ---
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [January 5, 2016, 6:45am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/18 "2016-01-05T06:45:21Z")
Thank you soooo much guys :-)) ---
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [January 26, 2016, 9:55am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/19 "2016-01-26T09:55:16Z")
hi guys ive got a few updates about my gigameter. here are some pics of the finished device: and here some new videos about the servo idea. https://www.youtube.com/embed/2Y9Q-ijOX3s?feature=oembed&wmode=opaque https://www.youtube.com/embed/Pz9GAE-K2cQ?feature=oembed&wmode=opaque ---
**Author:** ![david\_germany](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/bbce88/32.png) [@david\_germany](https://forum.gbfans.com/u/david_germany)\ **Post date:** [January 26, 2016, 10:00am UTC](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710/20 "2016-01-26T10:00:17Z")
here is a new video about the electronics. the earlights and domelights are working. but still merge together to one arduinocode. this will be the hardest part. the powerswitch turns on the soundchip (start up sound), the microphonemovement and the dome… the button on the handle will lighten up the lights in the dome and change the animation of the earlights. he will also play the accurate scanningsound, the 7 segment display and the scanlight will blinking… https://www.youtube.com/embed/5Q9IFM4gCw4?feature=oembed&wmode=opaque [Next page](https://forum.gbfans.com/t/my-gigameter-3d-printed/17710.md?page=2)