# My pack is almost finished!

**URL:** <https://forum.gbfans.com/t/my-pack-is-almost-finished/22188>\
**Category:** Proton Packs\
**Created:** [May 25, 2009, 3:48am UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188 "2009-05-25T03:48:32Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![thunderstruck507](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/e56c9b/32.png) [@thunderstruck507](https://forum.gbfans.com/u/thunderstruck507)\
**Post date:** [May 25, 2009, 3:48am UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188/1 "2009-05-25T03:48:32Z")

</div>

This has been a rush job trying to get a good pack done in time for game release in Dallas. I have around 5 days work in it and it came out pretty nice IMO.

I’m waiting on a [booster frame](https://www.gbfans.com/wiki/equipment/proton-pack/booster-frame) I bought from ebay, another clippard valve for the thrower, some [ribbon cable](https://www.gbfans.com/wiki/equipment/proton-pack/ribbon-cable) from a friend, light kit, [dale resistors](https://www.gbfans.com/wiki/equipment/proton-pack/dale-resistors), gun hook, and someone to make a run of bumpers. I’m gonna print labels tomorrow.

It’s not meant to be a 100% accurate pack, I don’t care anything about being ■■■■ and like adding my own touch. So far I have about $60 in this including the price of the used alice frame.

Here are pics of it as it sits today:

EDIT: [Cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) lenses are clear and will be getting lights, the lenses are smoked though but red lights will come through them great. I’m not cutting [power cell](https://www.gbfans.com/wiki/equipment/proton-pack/power-cell) opening until I have the light kit in hand.

Every major piece of this pack can be removed from the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard). Nothing is permanently attached.

 ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif)

 ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif)

 ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif)

---

<div class="post-metadata">

**Author:** ![stegasp](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/dbc845/32.png) [@stegasp](https://forum.gbfans.com/u/stegasp)\
**Post date:** [May 25, 2009, 2:28pm UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188/2 "2009-05-25T14:28:45Z")

</div>

Looks good. I can’t wait to see the finished product. What did you use as your building materials?

---

<div class="post-metadata">

**Author:** ![UltimateGBfan](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ultimategbfan/32/5863_2.png) [@UltimateGBfan](https://forum.gbfans.com/u/UltimateGBfan)\
**Post date:** [May 25, 2009, 4:19pm UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188/3 "2009-05-25T16:19:02Z")

</div>

A great starter pack for sure.

---

<div class="post-metadata">

**Author:** ![thunderstruck507](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/e56c9b/32.png) [@thunderstruck507](https://forum.gbfans.com/u/thunderstruck507)\
**Post date:** [May 25, 2009, 5:03pm UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188/4 "2009-05-25T17:03:14Z")

</div>

it’s 1/8" mdf mostly, the gun mount is a solid piece of wood, the crank box is stacked pieces of wood, the armor fins are fake wood trim from home depot (seems like plastic under the wood grain) and balsa wood on the [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) housing

the pack is very light…I would guess right around 20lbs or less

I’ve been taking some influences from [the video game](https://www.gbfans.com/wiki/games/ghostbusters-the-video-game) pack, soon I’m going to mock up a removeable slime tank/blower attachment based on the game pack. I just want it to be 100% detachable so I can choose between a plain pack or an upgraded pack

---

<div class="post-metadata">

**Author:** ![stegasp](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/dbc845/32.png) [@stegasp](https://forum.gbfans.com/u/stegasp)\
**Post date:** [May 25, 2009, 6:03pm UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188/5 "2009-05-25T18:03:53Z")

</div>

Nice. It’s looking sharp, man. Keep up the good work!

---

<div class="post-metadata">

**Author:** ![thunderstruck507](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/e56c9b/32.png) [@thunderstruck507](https://forum.gbfans.com/u/thunderstruck507)\
**Post date:** [May 25, 2009, 7:43pm UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188/6 "2009-05-25T19:43:45Z")

</div>

Printed some labels on high quality photo paper (which was a little thicker than I like) but they look better than plain paper. I can’t use standard labels because I needed some of them to be smaller…and actually ended up using all the smaller labels. I think they add to the pack without jumping out so much like normal size labels. They just add a splash of color and realism without being overpowering and attention grabbing.

I’m going to dirty them up and wear them a little later but not today. I’ll do it when I get my [booster frame](https://www.gbfans.com/wiki/equipment/proton-pack/booster-frame) and add it to the pack.

 ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif)

 ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif)

I’m going to try to utilize the switch in the pic as a “master” power switch for the lights. I found it in my junk pile and it fit the slot in the gearbox perfectly (in the pic it is loose, once glued down with some silicone it will look better). I like adding small details like this to my packs. I think it’s a cool reference to the first movie where Egon turns on Ray’s pack from the back.

 ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif)

---

<div class="post-metadata">

**Author:** ![thunderstruck507](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/e56c9b/32.png) [@thunderstruck507](https://forum.gbfans.com/u/thunderstruck507)\
**Post date:** [June 10, 2009, 11:10pm UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188/7 "2009-06-10T23:10:35Z")

</div>

Got the custom [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper) done and installed along with some labels complete with oil stains.

 ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif)

 ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif)

Also finished up some stuff on the gun: added slots in top, warning stickers, front trigger assembly, aluminum ring, painted alum ring on tip. I really need some grips but can’t find any.

 ![image](https://discdn.gbfans.com/original/1X/397d6ee216d0b09928814ccc829c7f2fdbd8f20e.gif)

If anyone has any interest in the bumper design there is a post in the classifieds. A friend who made it for me gave me the option of ordering more through him. He doesn’t want the hassle of selling them personally but said he would make and ship them to me.

---

<div class="post-metadata">

**Author:** ![nuclearbrew](https://forum.gbfans.com/user_avatar/forum.gbfans.com/nuclearbrew/32/5902_2.png) [@nuclearbrew](https://forum.gbfans.com/u/nuclearbrew)\
**Post date:** [June 11, 2009, 6:57am UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188/8 "2009-06-11T06:57:09Z")

</div>

Very cool man, I really like your gun, PM me if you need any parts, i have a set of grips and a few other odds and ends.

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [June 11, 2009, 5:48pm UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188/9 "2009-06-11T17:48:10Z")

</div>

Great job! Wait’ll ya geek out and do an event with it on.. you’ll be hooked for sure!

BTW, the elbow pads from the movies are cloth padded soccer pads, BUT looks like the ones in the game have plastic elbow caps, so you can easily just grab a cheap set of roller blade knee pads, and make do.

---

<div class="post-metadata">

**Author:** ![thunderstruck507](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/e56c9b/32.png) [@thunderstruck507](https://forum.gbfans.com/u/thunderstruck507)\
**Post date:** [June 11, 2009, 8:22pm UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188/10 "2009-06-11T20:22:10Z")

</div>

I found a set of movie accurate ones on ebay, they should be shipped to me today. I just need to dye them when I get em.

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [June 11, 2009, 9:04pm UTC](https://forum.gbfans.com/t/my-pack-is-almost-finished/22188/11 "2009-06-11T21:04:33Z")

</div>

I was busy worrying about getting the crookneck flashlights, and that ebay seller ended up being a dick.
