# My PKE... Big help needed.

**URL:** <https://forum.gbfans.com/t/my-pke-big-help-needed/15589>\
**Category:** PKE Meters\
**Created:** [October 22, 2009, 11:55am UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589 "2009-10-22T11:55:23Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tycoon\_Sawyer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/22d042/32.png) [@Tycoon\_Sawyer](https://forum.gbfans.com/u/Tycoon_Sawyer)\
**Post date:** [October 22, 2009, 11:55am UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/1 "2009-10-22T11:55:23Z")

</div>

Hey everyone.

I can’t belive how much of a n00b I am going to sound but, how in the world do you get a clean plastic cut?!

I’m trying to cut holes for the wings but no such luck? Please if anyone can help that would be awesome!

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [October 22, 2009, 2:01pm UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/2 "2009-10-22T14:01:10Z")

</div>

You need to give us some more information. What is it you’re trying to do? What kind of plastic? Is it flat sheet shaping, hole drilling, carving or something else? What have you tried already? Pics would be great.

---

<div class="post-metadata">

**Author:** ![Tycoon\_Sawyer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/22d042/32.png) [@Tycoon\_Sawyer](https://forum.gbfans.com/u/Tycoon_Sawyer)\
**Post date:** [October 22, 2009, 3:06pm UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/3 "2009-10-22T15:06:46Z")

</div>

I can’t get photos as my phone is dead. Its just normal lunch box type plastic. Food contaners, and im trying to cut hols where the wings will be on the sides.

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [October 22, 2009, 3:35pm UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/4 "2009-10-22T15:35:49Z")

</div>

And what tools are you using that aren’t working?

---

<div class="post-metadata">

**Author:** ![Tycoon\_Sawyer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/22d042/32.png) [@Tycoon\_Sawyer](https://forum.gbfans.com/u/Tycoon_Sawyer)\
**Post date:** [October 22, 2009, 4:21pm UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/5 "2009-10-22T16:21:31Z")

</div>

Ive tryed a sharp knife, making a hole and using sissors.

Bacicaly I just need to know what people use to cut the area where the wings come in and out?

Thanks!

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [October 22, 2009, 4:43pm UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/6 "2009-10-22T16:43:26Z")

</div>

You still haven’t explained what it is you’re working with. Is this a resin cast of an [Iona shoe polisher](https://www.gbfans.com/wiki/equipment/pke-meter/iona-shoe-polisher) or a peice of tupperware you’re modifying into a custom PKE? If it’s just tupperware a sharp knife should have worked fine, what went wrong?

---

<div class="post-metadata">

**Author:** ![Tycoon\_Sawyer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/22d042/32.png) [@Tycoon\_Sawyer](https://forum.gbfans.com/u/Tycoon_Sawyer)\
**Post date:** [October 22, 2009, 4:48pm UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/7 "2009-10-22T16:48:02Z")

</div>

A lint remover that I am going to turn into a PKE

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [October 22, 2009, 4:51pm UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/8 "2009-10-22T16:51:58Z")

</div>

Ah, much more informative. I’ve not done a lint brush build yet but I’d probably use either an exacto knive to carve out the space or a dremel with a grinding bit if I couldn’t get a good angle with the exacto. Hopefully someone who’s done a conversion will chime in with more advice.

---

<div class="post-metadata">

**Author:** ![GhostGuy](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/9fc29f/32.png) [@GhostGuy](https://forum.gbfans.com/u/GhostGuy)\
**Post date:** [October 23, 2009, 5:28pm UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/9 "2009-10-23T17:28:16Z")

</div>

I imagine drilling several holes along the length of the opening you want and then carefully using a razor to whittle away at the rest would give you the cleanest look.

---

<div class="post-metadata">

**Author:** ![Mattax](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/53a042/32.png) [@Mattax](https://forum.gbfans.com/u/Mattax)\
**Post date:** [October 24, 2009, 8:26pm UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/10 "2009-10-24T20:26:19Z")

</div>

Also use needle files after you drill the holes. They will clean up the holes nicely and give a clean look.

---

<div class="post-metadata">

**Author:** ![punkdude908](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/f1d935/32.png) [@punkdude908](https://forum.gbfans.com/u/punkdude908)\
**Post date:** [October 24, 2009, 10:25pm UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/11 "2009-10-24T22:25:15Z")

</div>

take either an x-acto knife or utility knife (box cutter) and heat up the blade with a propane torch until it glows orange. it’ll cut the plastic like butter. i’ve done this many times and it works great. the edges will look melted, but take a razor blade and carefully scrape the edge off. then it’ll look pretty clean.

---

<div class="post-metadata">

**Author:** ![Tycoon\_Sawyer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/22d042/32.png) [@Tycoon\_Sawyer](https://forum.gbfans.com/u/Tycoon_Sawyer)\
**Post date:** [October 24, 2009, 11:20pm UTC](https://forum.gbfans.com/t/my-pke-big-help-needed/15589/12 "2009-10-24T23:20:19Z")

</div>

Awesome. Thanks guys!!
