# My Real Ghostbusters inspired PKE Meter

**URL:** <https://forum.gbfans.com/t/my-real-ghostbusters-inspired-pke-meter/28831>\
**Category:** PKE Meters\
**Created:** [June 28, 2012, 9:02pm UTC](https://forum.gbfans.com/t/my-real-ghostbusters-inspired-pke-meter/28831 "2012-06-28T21:02:05Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![GBfan77](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/6bbea6/32.png) [@GBfan77](https://forum.gbfans.com/u/GBfan77)\
**Post date:** [June 28, 2012, 9:02pm UTC](https://forum.gbfans.com/t/my-real-ghostbusters-inspired-pke-meter/28831/1 "2012-06-28T21:02:05Z")

</div>

Yes, I know it’s not 100% accurate and may not be the Best, but I think I did a pretty good Job considering most of the parts I used came from a Dollar Store. I don’t know how to upload pics into a thread so here are links to it.

[http://www.gbfans.com/fans/props/PKE-meters/5926/2/](http://www.gbfans.com/fans/props/PKE-meters/5926/2/)

[http://www.gbfans.com/fans/props/PKE-meters/5926/3/](http://www.gbfans.com/fans/props/PKE-meters/5926/3/)

[http://www.gbfans.com/fans/props/PKE-meters/5926/4/](http://www.gbfans.com/fans/props/PKE-meters/5926/4/)

---

<div class="post-metadata">

**Author:** ![Andrew\_Phung](https://forum.gbfans.com/user_avatar/forum.gbfans.com/andrew_phung/32/5853_2.png) [@Andrew\_Phung](https://forum.gbfans.com/u/Andrew_Phung)\
**Post date:** [June 28, 2012, 9:57pm UTC](https://forum.gbfans.com/t/my-real-ghostbusters-inspired-pke-meter/28831/2 "2012-06-28T21:57:46Z")

</div>

That’s pretty cool. Do the parts move? Overall cost?

---

<div class="post-metadata">

**Author:** ![GBfan77](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/6bbea6/32.png) [@GBfan77](https://forum.gbfans.com/u/GBfan77)\
**Post date:** [June 28, 2012, 10:45pm UTC](https://forum.gbfans.com/t/my-real-ghostbusters-inspired-pke-meter/28831/3 "2012-06-28T22:45:45Z")

</div>

> [@Andrew Phung](#):
>
> That’s pretty cool. Do the parts move? Overall cost?

The Parts don’t move but the antennas are adjustable. Also the display blinks a green light and the antennas have three lights in each one that Blink in sequence. Over all cost, is hard to say as I didn’t keep track, but I’d say somewhere in the Twenty Dollar Budget, I can’t see it costing more than that. I think the most expensive item would’ve been the epoxy glue I used to put the parts together. The Antenna’s are made of two Glow sticks, the handle is just a hollow tube wrapped in electrical Tape and the body is basicly made up of various materials such from an old knob off a radio to plastic from a Model kit. Electronics were from a five LED Flasher like a Bike flasher and the display was going to be a chaser [bar graph](https://www.gbfans.com/wiki/equipment/proton-pack/bar-graph) but that many LEDS would’ve been two much for the flasher to handle so I just used a Dollar Store light bright knock off.

---

<div class="post-metadata">

**Author:** ![Silverstreak](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/e56c9b/32.png) [@Silverstreak](https://forum.gbfans.com/u/Silverstreak)\
**Post date:** [July 6, 2012, 10:19pm UTC](https://forum.gbfans.com/t/my-real-ghostbusters-inspired-pke-meter/28831/4 "2012-07-06T22:19:18Z")

</div>

Very nice work! I need to get crackin’ on an RGB meter.
