# need ideas..... **URL:** \ **Category:** Proton Packs\ **Created:** [October 15, 2008, 4:08am UTC](https://forum.gbfans.com/t/need-ideas/25345 "2008-10-15T04:08:49Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![ugly\_little\_spud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/u/dc4da7/32.png) [@ugly\_little\_spud](https://forum.gbfans.com/u/ugly_little_spud)\ **Post date:** [October 15, 2008, 4:08am UTC](https://forum.gbfans.com/t/need-ideas/25345/1 "2008-10-15T04:08:49Z")
im neck deep into my first pack and now my job has shut the doors, with little to money i could really use some ideas on cheap alternatives to the brass elbows and barbs ive tried norms alts and i cant get the steam glued the side ive tried like 10 different glues any help or ideas would be a great help ---
**Author:** ![Light\_Tech](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/5f8ce5/32.png) [@Light\_Tech](https://forum.gbfans.com/u/Light_Tech)\ **Post date:** [October 15, 2008, 8:11am UTC](https://forum.gbfans.com/t/need-ideas/25345/2 "2008-10-15T08:11:46Z")
If your gluing metals together there is a glue called JB Weld it works really well. Otherwise there are different strength epoxies. I’ve had troubles with epoxies when i didn’t rough up the areas that I wanted to glue, just popped off leaving me a chunk of dried epoxy, but if its roughed up it has something to stick to. Hope this helps ya out. -Chris ---
**Author:** ![ugly\_little\_spud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/u/dc4da7/32.png) [@ugly\_little\_spud](https://forum.gbfans.com/u/ugly_little_spud)\ **Post date:** [October 16, 2008, 12:56am UTC](https://forum.gbfans.com/t/need-ideas/25345/3 "2008-10-16T00:56:04Z")
thank you i try that