# Nstevic01's GB1 Pack Build

**URL:** <https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811>\
**Category:** Proton Packs\
**Created:** [July 12, 2012, 5:32pm UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811 "2012-07-12T17:32:42Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![nstevic01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@nstevic01](https://forum.gbfans.com/u/nstevic01)\
**Post date:** [July 12, 2012, 5:32pm UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/1 "2012-07-12T17:32:42Z")

</div>

This has been a long time in the making. Last year when we met the Tampa and Orlando guys I was inspired to begin my pack build. I spent the next 4 months tracking down each individual component and made a list. Once I got my Bonus and Tax return, I started placing orders.

After 9 Months of research, ordering, and waiting, I am now at a point where I can get started. The last main component I am missing is the thrower, I ordered one from CPU64 about 3 months ago so it should be close to being finished.

I would also like to say thank you to ALL of the seller’s listed below, you have been awesome to deal with and I appreciate the time spent answering all of my questions. You will be the ones I point to when someone wants to build a pack. A big thank you goes to AJ for providing a easy place to get some of the specialty parts, but my bank account hates you.

I am debating on placing up my excel tracking sheet which has listed all of the parts, sellers, prices, and shipping costs to give someone new an idea of what it costs to build one from the ground up. Had I have known how much I was truly going to spend sourcing everything, I might have just bought a “starter” pack for half the cost and gone from there.

Let’s just say I am now north of $2000, not including CPU64’s thrower, paint, primer, filler, etc…

Parts list to date:

**Real Parts:**

- LC-1 [Alice Pack frame](https://www.gbfans.com/shop/alice-pack-frame-lc-2) and straps with correct NSN’s

- Clippard R331

- Clippard R701

- [Clippard brass elbows](https://www.gbfans.com/shop/clippard-brass-elbow) and barbs

- [Dale PH-25 resistor](https://www.gbfans.com/shop/dale-ph-25-resistors)

- Dale RH50 resistor

- [Crank knob](https://www.gbfans.com/shop/crank-knob)

- [Sage resistor](https://www.gbfans.com/wiki/equipment/proton-pack/sage-resistor)

- [Arcolectric](https://www.gbfans.com/wiki/equipment/proton-pack/arcolectric) clear and red indicators

- Orange and White Hatlights

**Replica Parts**

- [Legris](https://www.gbfans.com/wiki/equipment/proton-pack/legris) straits

- Legris banjos

- SMC elbows

**Vincenzo330’s:**

- [Motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard)

- bigi330 shell

- [aluminum HGA](https://www.gbfans.com/shop/aluminum-welded-hga)

- aluminum [booster tube](https://www.gbfans.com/wiki/equipment/proton-pack/booster-tube) with plug

- [aluminum n-filter](https://www.gbfans.com/shop/aluminum-welded-n-filter)

- aluminum vac line

- [aluminum beam line](https://www.gbfans.com/shop/aluminum-welded-beam-line) and [filler tube](https://www.gbfans.com/shop/aluminum-welded-filler-tube)

- aluminum cable clamps

- aluminum [injector tubes](https://www.gbfans.com/shop/aluminum-welded-injectors)

- [aluminum ppd](https://www.gbfans.com/shop/aluminum-resin-ppd)

**CPU64’s:**

- [aluminum ion arm](https://www.gbfans.com/shop/aluminum-welded-ion-arm)

- aluminum thrower set (on order)

**Anhcon’s:**

- aluminum ion arm assembly

- aluminum [v-hook](https://www.gbfans.com/wiki/equipment/proton-pack/v-hook)

- acrylic tube w/trigger tip

- aluminum [gun track](https://www.gbfans.com/wiki/equipment/proton-pack/gun-track)

- [splitless loom](https://www.gbfans.com/shop/34-splitless-wire-loom) locking ring

**jpa35’s:**

- aluminum shock mount (to hold me over until AJ’s real bellows are done)

**Nickatron’s:**

- [booster frame](https://www.gbfans.com/wiki/equipment/proton-pack/booster-frame)

- [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper)

**Multimedia Mahem’s:**

- thrower grips

- full tubing set

**GBFans’:**

- aluminum [side knob](https://www.gbfans.com/shop/ecto-goggle-side-knobs) set

- bellow replica (on waiting list)

**GhostGuy’s:**

- Mighty Microcontroller for lights and sounds

**Crix’s:**

- [power cell](https://www.gbfans.com/wiki/equipment/proton-pack/power-cell) and [cyclotron lens](https://www.gbfans.com/shop/cyclotron-lens) set

**JoeLuna33’s:**

- aluminum label set

**gEkX’s:**

- hardware set

And of course the pictures, there are some missing, but this is what I have on my HD at this time. I will transfer the rest later:

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4277.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4279.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4280.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4282.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4283.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4657.jpg)

---

<div class="post-metadata">

**Author:** ![techdisaster](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/eada6e/32.png) [@techdisaster](https://forum.gbfans.com/u/techdisaster)\
**Post date:** [July 12, 2012, 7:31pm UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/2 "2012-07-12T19:31:08Z")

</div>

Wow - this looks like it will be an amazing build. Good luck.

---

<div class="post-metadata">

**Author:** ![namssorg](https://forum.gbfans.com/user_avatar/forum.gbfans.com/namssorg/32/3980_2.png) [@namssorg](https://forum.gbfans.com/u/namssorg)\
**Post date:** [July 14, 2012, 5:11am UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/3 "2012-07-14T05:11:39Z")

</div>

Exciting! Looking forward to seeing this progress. I’m always amazed at how much more organized some of you guys seem to be than I was when I started my build.

And hey- nice cooler 🙂 I worked on that.

---

<div class="post-metadata">

**Author:** ![nstevic01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@nstevic01](https://forum.gbfans.com/u/nstevic01)\
**Post date:** [July 14, 2012, 9:54pm UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/4 "2012-07-14T21:54:47Z")

</div>

Some progress on the pack.

I started with mounting the brackets to the mother board. I traced the shell out on what was the best centering I could do. I will have to trim a little of the board towards the bottom where it does not line up just right. Once I traced the shell, I used a micrometer to measure the thickness of the pack walls where the brackets were placed and used those numbers to place the bracket.

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4732.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4733.jpg)

Once I got the brackets on, I worked on tapping them to be mounted. Once I had the shell lined up on the board, I used clamps to keep the shell as flush to the board as possible while tapping.

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4730.jpg)

Test fitting the shell to the board

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_47241.jpg)

I went with 3/8" bolts to mount the pack to the ALICE frame. Since I could not find spacers for the bolts, I picked up some steel tubing to make my own. I started with 1" spacers, but found out that GB1 packs used 1/2" spacers. So I had to cut new ones, pictures below are of the 1" ones.

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4729.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4734.jpg)

Also picked up the rubber spacer that the metal one will sit inside. I will need to paint it black, but it was as close as I could find.

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4735.jpg)

ALICE frame mounted to [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard), used wing nuts to secure on the backside.

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4736.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4737.jpg)

More to come!

---

<div class="post-metadata">

**Author:** ![nstevic01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@nstevic01](https://forum.gbfans.com/u/nstevic01)\
**Post date:** [July 17, 2012, 2:40am UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/5 "2012-07-17T02:40:01Z")

</div>

More work done tonight. Mounted the [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper), [booster frame](https://www.gbfans.com/wiki/equipment/proton-pack/booster-frame), and PPD. I never would have thought it would take so long to get everything mounted up.

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4743.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4744.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4746.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4747.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4748.jpg)

---

<div class="post-metadata">

**Author:** ![drjameshouse](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/6a8cbe/32.png) [@drjameshouse](https://forum.gbfans.com/u/drjameshouse)\
**Post date:** [July 17, 2012, 3:17am UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/6 "2012-07-17T03:17:21Z")

</div>

> [@nstevic01](#):
>
> **jpa35’s:**
> 
> - aluminum shock mount (to hold me over until AJ’s real bellows are done)
> 
> ![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4279.jpg)

Did you buy the shock mount directly from Jason or from someone else? I have about 7 of them from Jason directly and they don’t look like that. Or did you do some kind of modding to it? Both the GB1 and GB2 versions from him don’t have a large hole like that, and don’t require a large bolt to mount. I know you said you are replacing it so it doesn’t really matter, I’m just curious.

---

<div class="post-metadata">

**Author:** ![nstevic01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@nstevic01](https://forum.gbfans.com/u/nstevic01)\
**Post date:** [July 17, 2012, 3:23am UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/7 "2012-07-17T03:23:30Z")

</div>

I got it off of ebay from someone who said it was Jason’s mount. I thought it looked a little off, but at the time nobody was selling them at all. I ended up only paying $15 for it so I wasn’t too concerned about it. Like I said, it’s more of a placeholder until I get my hands on the AJ bellow.

---

<div class="post-metadata">

**Author:** ![IPv6Freely](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ipv6freely/32/4012_2.png) [@IPv6Freely](https://forum.gbfans.com/u/IPv6Freely)\
**Post date:** [July 17, 2012, 9:13am UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/8 "2012-07-17T09:13:43Z")

</div>

> [@drjameshouse](#):
>
> > [@nstevic01](#):
> >
> > **jpa35’s:**
> > 
> > - aluminum shock mount (to hold me over until AJ’s real bellows are done)
> > 
> > ![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4279.jpg)
> 
> Did you buy the shock mount directly from Jason or from someone else? I have about 7 of them from Jason directly and they don’t look like that. Or did you do some kind of modding to it? Both the GB1 and GB2 versions from him don’t have a large hole like that, and don’t require a large bolt to mount. I know you said you are replacing it so it doesn’t really matter, I’m just curious.

Would you consider letting one go? 🙂

---

<div class="post-metadata">

**Author:** ![nstevic01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@nstevic01](https://forum.gbfans.com/u/nstevic01)\
**Post date:** [August 6, 2012, 11:31pm UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/9 "2012-08-06T23:31:02Z")

</div>

Finally got some time to get the pack painted. She is fully primed and currently drying. I do not plan on weathering the pack just yet, I’d like to enjoy the fresh off the workbench for a bit. But to give myself the option for weathering, what type of silver paint is being used as an undercoat?

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4863.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4862.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4861.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4864.jpg)

---

<div class="post-metadata">

**Author:** ![nstevic01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@nstevic01](https://forum.gbfans.com/u/nstevic01)\
**Post date:** [August 14, 2012, 3:07am UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/10 "2012-08-14T03:07:38Z")

</div>

Still working on the painting, I’m finishing it off with satin black but I can not seem to get a perfect coat on it. There are areas that don’t look as dark as others. So a few more coats should do it.

In the mean time, I am working on a little something for the XLR/Switch panel. Since I am getting the Mighty Microcontroller for the lights and sounds, I figured I would wire up the XLR connector for USB connection and use the DC barrel plug for charging. I ordered up a Switchcraft 4 pin socket and a female 4 pin connector.

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4870.jpg)

---

<div class="post-metadata">

**Author:** ![nstevic01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@nstevic01](https://forum.gbfans.com/u/nstevic01)\
**Post date:** [August 15, 2012, 11:17pm UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/11 "2012-08-15T23:17:50Z")

</div>

Panel is done!! Best part is that it works!

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4888.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4887.jpg)

---

<div class="post-metadata">

**Author:** ![westies14](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/w/13edae/32.png) [@westies14](https://forum.gbfans.com/u/westies14)\
**Post date:** [August 16, 2012, 12:11am UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/12 "2012-08-16T00:11:47Z")

</div>

Awesome!!!

---

<div class="post-metadata">

**Author:** ![nstevic01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@nstevic01](https://forum.gbfans.com/u/nstevic01)\
**Post date:** [August 16, 2012, 1:39am UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/13 "2012-08-16T01:39:15Z")

</div>

Finally got the painting done, on to some assembly…

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4889.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4891.jpg)

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_IMG\_4893.jpg)

---

<div class="post-metadata">

**Author:** ![nstevic01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@nstevic01](https://forum.gbfans.com/u/nstevic01)\
**Post date:** [August 23, 2012, 12:53am UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/14 "2012-08-23T00:53:47Z")

</div>

Little more work tonight. I tore apart an oil filter and took the bottom plate out, then welded it inside the [N-filter](https://www.gbfans.com/wiki/equipment/proton-pack/n-filter). I will be using this to attach and detach the N-filter. Reasoning behind this, is a “reveal” N-fitler. I’m not 100% on the internal design, but I wanted to make something that could possible represent what was meant to be there. So I will be studying Nitrogen and Liquid Nitrogen filter designs and come up with something that is visually appealing.

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_P1020579.jpg)

Started closing off the N-filter mounting area and will be working on the pole that the filter will mount on.

![image]([http://www.gbfans.com/images/pb/nstevic01/Proton](http://www.gbfans.com/images/pb/nstevic01/Proton) Pack Build\_P1020578.jpg)

That’s it for now

---

<div class="post-metadata">

**Author:** ![Alan\_Hawkins](https://forum.gbfans.com/user_avatar/forum.gbfans.com/alan_hawkins/32/4015_2.png) [@Alan\_Hawkins](https://forum.gbfans.com/u/Alan_Hawkins)\
**Post date:** [August 23, 2012, 1:45am UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/15 "2012-08-23T01:45:02Z")

</div>

MIND. BLOWN.

Sent from my DROID X2 using Ghostbusters Fans on Android

---

<div class="post-metadata">

**Author:** ![westies14](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/w/13edae/32.png) [@westies14](https://forum.gbfans.com/u/westies14)\
**Post date:** [August 23, 2012, 2:25pm UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/16 "2012-08-23T14:25:46Z")

</div>

I have a question for you! What is the center jack, next to the Switchcraft XLR?

---

<div class="post-metadata">

**Author:** ![nstevic01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@nstevic01](https://forum.gbfans.com/u/nstevic01)\
**Post date:** [August 23, 2012, 2:29pm UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/17 "2012-08-23T14:29:08Z")

</div>

Standard DC power jack (Size M). It will be wired for charging the pack battery.

---

<div class="post-metadata">

**Author:** ![dhammans](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/65b543/32.png) [@dhammans](https://forum.gbfans.com/u/dhammans)\
**Post date:** [August 23, 2012, 11:58pm UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/18 "2012-08-23T23:58:04Z")

</div>

I did a google image search for liquid nitrogen filter, and on the third row is your picture above of the inside of the [N-Filter](https://www.gbfans.com/wiki/equipment/proton-pack/n-filter). Looks like your off to a good start 🙂

---

<div class="post-metadata">

**Author:** ![Aaron\_Norton](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/9fc348/32.png) [@Aaron\_Norton](https://forum.gbfans.com/u/Aaron_Norton)\
**Post date:** [August 24, 2012, 12:47am UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/19 "2012-08-24T00:47:28Z")

</div>

Some very smart ideas in this thread. Very smart.

---

<div class="post-metadata">

**Author:** ![nstevic01](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/f4b2a3/32.png) [@nstevic01](https://forum.gbfans.com/u/nstevic01)\
**Post date:** [August 24, 2012, 5:47pm UTC](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811/20 "2012-08-24T17:47:43Z")

</div>

Just got back from Home Depot…should have the mock up in a couple of days.

As far as the filtration goes, this was one of the only filters I was able to find. Apparently it’s not very common to filter LN.

For those interested in specs:

> [@](#):
>
> As a check filter for a process line with liquid nitrogen, we have designed a special filter housing that contains a pleated FUJIPLATE filter element.
> 
> The housing has 1/2 Clamps and a surface polishing of Ra 0.8.
> 
> Operating temp : -196°C to +30°C
> 
> Operating pressure : 0 to 10 bar

While researching the properties of LN, I came across this:

> [@](#):
>
> Since the liquid to gas expansion ratio of nitrogen is 1:694 at 20 °C (68 °F), a tremendous amount of force can be generated if liquid nitrogen is rapidly vaporized.

So if I am understanding this correctly, in the event of pack components overheating and causing the LN to expand, there would need to be some sort of venting system in place for safety. Probably why the VG Pack has the ability to do so.

This of course gives me the excuse to rig up an emergency venting system, which will be vented through the [N-Filter](https://www.gbfans.com/wiki/equipment/proton-pack/n-filter) holes. I already have an idea of how I will do it. A guy building an R2 unit came up with the idea, and it apparently works well. The mighty microcontroller should be easy enough to program the solenoid to work with the fore-button on the barrel. Link to his blog if you want to check it out: [Victor's R2D2 Building Diary: August 2007](http://vfranco.blogspot.com/2007_08_01_archive.html)

 ![image](https://discdn.gbfans.com/original/3X/3/b/3b5d665c6c20b3f02396dd1ff05e7e3818923b84.jpeg)

[Next page](https://forum.gbfans.com/t/nstevic01s-gb1-pack-build/31811.md?page=2)
