# Official Pack and Thrower Screw List (GB1) **URL:** \ **Category:** Proton Packs\ **Created:** [December 22, 2011, 10:54pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216 "2011-12-22T22:54:47Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![janderson0719](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e36b37/32.png) [@janderson0719](https://forum.gbfans.com/u/janderson0719)\ **Post date:** [January 5, 2012, 6:19pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/21 "2012-01-05T18:19:27Z")
Sell them here or on eBay. ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [January 8, 2012, 7:32am UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/22 "2012-01-08T07:32:52Z")
Whats the size for the flat socket screws on the Side Adjustment Knobs? It appears to be either 10-32 or 1/4"-20 ---
**Author:** ![janderson0719](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e36b37/32.png) [@janderson0719](https://forum.gbfans.com/u/janderson0719)\ **Post date:** [January 8, 2012, 7:38am UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/23 "2012-01-08T07:38:11Z")
6-32 I believe ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [January 10, 2012, 8:58am UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/24 "2012-01-10T08:58:48Z")
wow I was off on that one šŸ˜Š ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [January 12, 2012, 5:39am UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/25 "2012-01-12T05:39:02Z")
For anybody that may have missed it I plan to have this hardware In full sets ready to ship within a week. Details at my shop: [GBFans.com](http://www.gbfans.com/community/viewtopic.php?f=31&t=28583) ---
**Author:** ![wm6929](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/w/ed8c4c/32.png) [@wm6929](https://forum.gbfans.com/u/wm6929)\ **Post date:** [January 21, 2012, 12:31am UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/26 "2012-01-21T00:31:16Z")
> [@janderson0719](#): > > 6-32 I believe you sure? ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [January 21, 2012, 1:29am UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/27 "2012-01-21T01:29:54Z")
I didnā€™t think that either and Iā€™ve heard from two people 8-32.. this has been fixed on my shop ---
**Author:** ![janderson0719](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e36b37/32.png) [@janderson0719](https://forum.gbfans.com/u/janderson0719)\ **Post date:** [January 21, 2012, 1:38am UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/28 "2012-01-21T01:38:51Z")
> [@wm6929](#): > > > [@janderson0719](#): > > > > 6-32 I believe > > you sure? No ---
**Author:** ![wm6929](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/w/ed8c4c/32.png) [@wm6929](https://forum.gbfans.com/u/wm6929)\ **Post date:** [January 21, 2012, 5:50pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/29 "2012-01-21T17:50:29Z")
I went to Lowes last night. I have a 10-32 and a 8-32 for the side disks, and I think that the 8-32 is the most correct bolt. 8-32 flared allen bolt for side disks. what do you think? looks like Jimboā€™s machined disks has 8-32. ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [January 21, 2012, 6:10pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/30 "2012-01-21T18:10:52Z")
I figured it was a 8-32 flat socket screw ---
**Author:** ![Socko525](https://forum.gbfans.com/user_avatar/forum.gbfans.com/socko525/32/3979_2.png) [@Socko525](https://forum.gbfans.com/u/Socko525)\ **Post date:** [March 7, 2012, 8:32pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/31 "2012-03-07T20:32:20Z")
I figured Iā€™d post it here, as this seems like the most logical place. When I need to order socket head screws, this is the place I go. You can get every size, and varying lengths. They also run promotions quite often (current one is 30% of an order of $75 or more). Some of the quantities are better suited to bulk orders, but if a GB franchise or group of people got together and ordered, I think itā€™d be worthwile. I havenā€™t done a lot of research to see what other companies are out there, but figured it couldnā€™t hurt to post my findings! > **[RTL Fasteners - Hobbies, Radio Control, ( R/C or RC ), locknuts, metric...](https://www.rtlfasteners.com/RC/b.html)** ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [March 8, 2012, 9:17pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/32 "2012-03-08T21:17:03Z")
Already done just check out my shop. Those prices are ok but Iā€™ve found cheaper hence why my sets average 30 cents a screw. Cheaper than Ace, Lowes, or Home Depot. Also my sets are marked clearly as to what each screw is and where it goes. I take all the guess work out of length needed as well. Nothing sucks more then throwing down $20 plus dollars on hardware only to find you bought the wrong length or type/size. ---
**Author:** ![IPv6Freely](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ipv6freely/32/4012_2.png) [@IPv6Freely](https://forum.gbfans.com/u/IPv6Freely)\ **Post date:** [August 18, 2012, 6:17pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/33 "2012-08-18T18:17:11Z")
Iā€™m trying to decide between 10-32 for my [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper), or 1/4-20. In all reality, Iā€™ll be using 10-24 if anything since thatā€™s what I have and itā€™s what Iā€™ve been using on my pack exclusively :oops: Iā€™m leaning towards the 1/4-20 despite the norm seemingly being 10-32, just because theyā€™re a bit beefier. Thoughts? EDIT: Also, this thread should be stickied. ---
**Author:** ![pchrisbosh1](https://forum.gbfans.com/user_avatar/forum.gbfans.com/pchrisbosh1/32/124855_2.png) [@pchrisbosh1](https://forum.gbfans.com/u/pchrisbosh1)\ **Post date:** [August 18, 2012, 7:16pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/34 "2012-08-18T19:16:54Z")
The hero packs definitely used 1/4-20 screws for the bumpers, so your instinct is correct :-). 1/4-20 socket caps for GB1 1/4-20 round head phillips screw for GB2 ---
**Author:** ![IPv6Freely](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ipv6freely/32/4012_2.png) [@IPv6Freely](https://forum.gbfans.com/u/IPv6Freely)\ **Post date:** [August 18, 2012, 7:59pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/35 "2012-08-18T19:59:00Z")
Good to know Iā€™m not crazy. One thing I need to do is come up with a chart that shows screw sizes, and along with it two drill size measurements - one if plan to tap the hole for the screw, and another for if the screw is supposed to go through the hole without screwing into it. Just for my own records šŸ™‚ ---
**Author:** ![gbfan3569](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/ce73a5/32.png) [@gbfan3569](https://forum.gbfans.com/u/gbfan3569)\ **Post date:** [August 26, 2012, 1:59pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/36 "2012-08-26T13:59:09Z")
Thanks for putting up this thread, definately helpful! Sent from Teletraan-1 ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [August 27, 2012, 4:30am UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/37 "2012-08-27T04:30:23Z")
In the chat the other day we were talking about the spacers on the gun knub. I think we may found some decent ones. Reference: Funny thing, I figured the smaller ones would be correct but it turns out the larger ones are very close: ![image](https://discdn.gbfans.com/original/3X/3/6/369fb012f71df0d6a5af3f7c71a6acc5de0fe55e.jpeg) ![image](https://discdn.gbfans.com/original/3X/7/5/75dfe6f296dc8d3a6d605b766a640e2a6b395984.jpeg) ![image](https://discdn.gbfans.com/original/3X/c/d/cd91eb15017a99091e438846e630c102ed3cd367.jpeg) ![image](https://discdn.gbfans.com/original/3X/7/7/779098b0e35667dfd15ede41afd2eccce39f593c.jpeg) Info from the eBay Listing: * * * This item has a Manufacturerā€™s Suggested Retail Price of: $2.00 !! This is four Bronze Bushings to be used on a swing rack assembly from Team Associated. This is a stock part for: RC10 GT2 RC10 NTC3 Features: Made of Bronze Reduced Weight Includes: Two (2) 5x8 Bushings Two (2) 3.5x6 Bushings * * * Again, the 3.5mm ID are too small. I like the OD of the 5mm ones but there is a little ā€œwiggleā€ room. You may be able to get away with some 4mm ID bushings. I assume any Hobby store that carries RC car stuff would have these. The only other options Iā€™ve seen are thick Brass Component Flat Washers, price wise they are a little outrageous: [http://www.amazon.com/dp/B004K1FAJQ?tag=gbfans-discourse-20](http://www.amazon.com/dp/B004K1FAJQ?tag=gbfans-discourse-20) I recommend doing a eBay search for the bushings if you donā€™t have a hobby shop close to you. Links in this post may be affiliate links. Purchases made through them help support this site at no additional cost to you. ---
**Author:** ![kevinj319](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kevinj319/32/187120_2.png) [@kevinj319](https://forum.gbfans.com/u/kevinj319)\ **Post date:** [September 5, 2012, 6:08pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/38 "2012-09-05T18:08:21Z")
Thanks gEkX! I searched on eBay and found this exact thing. Then I realized the seller is local to my town, and I could go pick it up cheaper than the eBay price and without shipping fees. ---
**Author:** ![Jurassic\_Paul](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e68b1a/32.png) [@Jurassic\_Paul](https://forum.gbfans.com/u/Jurassic_Paul)\ **Post date:** [January 23, 2017, 1:32am UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/39 "2017-01-23T01:32:05Z")
Nice work. Could you possibly list each one in mm for us in the UK? šŸ˜‰ i.e: M4, M5 and M6 are the ones I found but not sure what goes where šŸ˜• Paul ---
**Author:** ![PssdffJay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/pssdffjay/32/6529_2.png) [@PssdffJay](https://forum.gbfans.com/u/PssdffJay)\ **Post date:** [January 23, 2017, 11:40pm UTC](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216/40 "2017-01-23T23:40:10Z")
This is a very old thread. Iā€™m not sure if the OP even is active anymore. [Previous page](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216.md?page=1) [Next page](https://forum.gbfans.com/t/official-pack-and-thrower-screw-list-gb1/33216.md?page=3)