# pack casting... **URL:** \ **Category:** Proton Packs\ **Created:** [May 24, 2008, 4:17am UTC](https://forum.gbfans.com/t/pack-casting/24614 "2008-05-24T04:17:16Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Ian23](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/fbc32d/32.png) [@Ian23](https://forum.gbfans.com/u/Ian23)\ **Post date:** [May 24, 2008, 4:17am UTC](https://forum.gbfans.com/t/pack-casting/24614/1 "2008-05-24T04:17:16Z")
can i use mold builder to cast my pack?if so how much should i use? ---
**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/187072_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\ **Post date:** [May 24, 2008, 4:17am UTC](https://forum.gbfans.com/t/pack-casting/24614/2 "2008-05-24T04:17:53Z")
What is a mold builder? ---
**Author:** ![Ian23](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/fbc32d/32.png) [@Ian23](https://forum.gbfans.com/u/Ian23)\ **Post date:** [May 24, 2008, 4:25am UTC](https://forum.gbfans.com/t/pack-casting/24614/3 "2008-05-24T04:25:48Z")
mold builder is a molding supply you can buy at an arts and craft store and i know someone from the site has used it for something ---
**Author:** ![Keaton\_Kohl](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/3da27b/32.png) [@Keaton\_Kohl](https://forum.gbfans.com/u/Keaton_Kohl)\ **Post date:** [May 24, 2008, 4:35am UTC](https://forum.gbfans.com/t/pack-casting/24614/4 "2008-05-24T04:35:10Z")
I used Mold builder to make my kid sized [proton packs](https://www.gbfans.com/wiki/equipment/proton-pack) and I wish I had sprung for silicone. I polished my buck to a sheen but then when I pulled off the mold builder the mold streaches a bit and then when it goes back it has streach marks like human skin. Then all the casts have that same weird texture. If you really care about the surface use silicone. Also you have to build up mold builder in thin layers and dry it completely between layers it takes forever. ---
**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/187072_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\ **Post date:** [May 24, 2008, 4:38am UTC](https://forum.gbfans.com/t/pack-casting/24614/5 "2008-05-24T04:38:19Z")
I guess that is a no. Usually 3-5 gallons of silicone is required.. which amounts to something like $400+. ---
**Author:** ![Ian23](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/fbc32d/32.png) [@Ian23](https://forum.gbfans.com/u/Ian23)\ **Post date:** [May 24, 2008, 4:45am UTC](https://forum.gbfans.com/t/pack-casting/24614/6 "2008-05-24T04:45:17Z")
what cheap casting material can i use ---
**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/187072_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\ **Post date:** [May 24, 2008, 5:12am UTC](https://forum.gbfans.com/t/pack-casting/24614/7 "2008-05-24T05:12:05Z")
> [@ian24](#): > > what cheap casting material can i use I suggest reading this.. [http://www.gbproject.com/plans/mctut/index.html](http://www.gbproject.com/plans/mctut/index.html) There is no cheap way to do anything that looks good.. just FYI. ---
**Author:** ![Keaton\_Kohl](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/3da27b/32.png) [@Keaton\_Kohl](https://forum.gbfans.com/u/Keaton_Kohl)\ **Post date:** [May 24, 2008, 6:26am UTC](https://forum.gbfans.com/t/pack-casting/24614/8 "2008-05-24T06:26:06Z")
Here is an idea… In my area there are about 4 of us that want a pack so we are just going to pool our money together make one buck, one mold and 4 casts. It will cut down on cost if you can find someone in your area that wants a pack. Then you don’t have to sacrifice the quality of your materials. You only get one shot at the mold so do it right the first time and you will thank yourself later.