# Particle Thrower Help

**URL:** <https://forum.gbfans.com/t/particle-thrower-help/32367>\
**Category:** Proton Packs\
**Created:** [December 6, 2009, 4:45am UTC](https://forum.gbfans.com/t/particle-thrower-help/32367 "2009-12-06T04:45:53Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fandango](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/b5ac83/32.png) [@Fandango](https://forum.gbfans.com/u/Fandango)\
**Post date:** [December 6, 2009, 4:45am UTC](https://forum.gbfans.com/t/particle-thrower-help/32367/1 "2009-12-06T04:45:53Z")

</div>

Hi-- newbie here!

I used the search feature but haven’t been able to find what I’m looking for.

I’m wondering if anybody offers Fiberglass or Aluminum [Particle Throwers](https://www.gbfans.com/wiki/equipment/particle-thrower)? I’ve seen one member who is making his own from aluminum and it looks awesome, but I am hoping to find somebody who offers them for sale. If anybody can offer some helps, tips, or pointers in the right direction-- I’d appreciate it. Thanks!

---

<div class="post-metadata">

**Author:** ![enchanted\_unicorn](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/c2a13f/32.png) [@enchanted\_unicorn](https://forum.gbfans.com/u/enchanted_unicorn)\
**Post date:** [December 6, 2009, 4:57am UTC](https://forum.gbfans.com/t/particle-thrower-help/32367/2 "2009-12-06T04:57:33Z")

</div>

try throwing chicken, he wants to help everyone. his kits are really good

---

<div class="post-metadata">

**Author:** ![ThrowingChicken](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/46a35a/32.png) [@ThrowingChicken](https://forum.gbfans.com/u/ThrowingChicken)\
**Post date:** [December 6, 2009, 6:46am UTC](https://forum.gbfans.com/t/particle-thrower-help/32367/3 "2009-12-06T06:46:40Z")

</div>

I don’t have any kits right now but I could sell you a full thrower.

---

<div class="post-metadata">

**Author:** ![Fandango](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/b5ac83/32.png) [@Fandango](https://forum.gbfans.com/u/Fandango)\
**Post date:** [December 6, 2009, 7:26pm UTC](https://forum.gbfans.com/t/particle-thrower-help/32367/4 "2009-12-06T19:26:57Z")

</div>

Thanks!

Where can I read more about your thrower and see pictures?

---

<div class="post-metadata">

**Author:** ![ThrowingChicken](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/46a35a/32.png) [@ThrowingChicken](https://forum.gbfans.com/u/ThrowingChicken)\
**Post date:** [December 6, 2009, 11:50pm UTC](https://forum.gbfans.com/t/particle-thrower-help/32367/5 "2009-12-06T23:50:03Z")

</div>

I do not have photos of the current guns in progress just yet, but they are being built in a similar manner to the one I chronicled in this thread - [Proton Gun V2.0 build thread - Proton Packs - GBFans.com](http://www.gbfans.com/community/viewtopic.php?f=2&t=11343)

Here it is completed - [http://throwingchicken.com/offsite/Proton%20Pack/41.jpg](http://throwingchicken.com/offsite/Proton%20Pack/41.jpg)

They differ slightly, the heat sink has been replaced with a more accurate resin one, which you can see the buck of here - [http://throwingchicken.com/offsite/Proton%20Gun%202.5/buck%20progress/heatsinkprofile.jpg](http://throwingchicken.com/offsite/Proton%20Gun%202.5/buck%20progress/heatsinkprofile.jpg)

I will probably do a couple with a weathered finish and the other 3 clean. Two out of the five will have basic lights (no moving, just static with the exception of the blinking red light and a barrel that lights up with the press of a button), and the rest will have film-accurate lights. They will probably run pretty close to $400 depending on the light setup. If that is out of your range, one of the guns is kind of lagging behind in progress so I could let it go as is for a lower price. PM me if interested and I’ll get some photos together for you.

---

<div class="post-metadata">

**Author:** ![Fandango](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/b5ac83/32.png) [@Fandango](https://forum.gbfans.com/u/Fandango)\
**Post date:** [December 7, 2009, 11:22pm UTC](https://forum.gbfans.com/t/particle-thrower-help/32367/6 "2009-12-07T23:22:01Z")

</div>

Thanks Chicken! That thrower looks phenomenal! However, it’s out of my price range right now. I wish I could afford to just buy one outright, but I also like the idea of putting it together myself too-- a small sense of accomplishment! LOL

What I’m hoping to find is something that is durable and can take a pretty good beating-- either fiberglass or aluminum. I"d like for it to be in kit form that I can eventually add Hyperdyne’s electronics or another comparable lighting kit to. Lightweight would be nice, but I know that’s a trade-off for durability and function. I don’t have to have authentic Clippards and other parts, as long as the parts are accurate and will hold up to a little abuse.

I really appreciate the help, and if anybody can point me in the right direction I would really appreciate it!

Thanks!
