# PKE Electronics

**URL:** <https://forum.gbfans.com/t/pke-electronics/800>\
**Category:** PKE Meters\
**Created:** [May 28, 2006, 8:38am UTC](https://forum.gbfans.com/t/pke-electronics/800 "2006-05-28T08:38:23Z")\
**Posts on this page:** 16\
**Page:** 1

<div class="post-metadata">

**Author:** ![philipe](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/bbe5ce/32.png) [@philipe](https://forum.gbfans.com/u/philipe)\
**Post date:** [May 28, 2006, 8:38am UTC](https://forum.gbfans.com/t/pke-electronics/800/1 "2006-05-28T08:38:23Z")

</div>

Finally started work on my PKE project. I’ve had the shell for a while but the electronics have always troubled me.

Like many people on here I really admire the hyperdyne PKE kit but simply can not afford it so I’ve finally bitten the bullet and decided to try and build my own.

After much browsing and research (Thanks Wikipedia!) and bearing in mind that I’ve never used a soldering iron in my life before now I’ve finally built a working servo controller circuit.

The circuit is v. small and runs off 4.5v. I’m think of running it off 3 AAA’s placed in the handle. This should help distribute the weight evenly. It isn’t 100% accurate as I’ve decided to control the servo(s?) with a potentiometer connected to the knob at the top of the handle on the base of the PKE. This would give it a more natural movement, so instead of the wings only being capable of two positions, I can now have an infinite number of positions.

All I need to do now is mount it in the shell and then I can start on the lights. I’ll try and post some pictures of the circuit in the next day or two.

---

<div class="post-metadata">

**Author:** ![cmallon135](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/5daacb/32.png) [@cmallon135](https://forum.gbfans.com/u/cmallon135)\
**Post date:** [June 10, 2006, 11:33pm UTC](https://forum.gbfans.com/t/pke-electronics/800/2 "2006-06-10T23:33:45Z")

</div>

K, two questions. First: How much did it cost? Second: How did you do it? I want to build a PKE soooo bad but I can’t afford the Hyperdyne electronics.

---

<div class="post-metadata">

**Author:** ![Ecto96](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/919ad9/32.png) [@Ecto96](https://forum.gbfans.com/u/Ecto96)\
**Post date:** [June 11, 2006, 5:51am UTC](https://forum.gbfans.com/t/pke-electronics/800/3 "2006-06-11T05:51:11Z")

</div>

Yeah, I have an actual [iona shoe polisher](https://www.gbfans.com/wiki/equipment/pke-meter/iona-shoe-polisher) shell, and wanna make it into a pke but hyperdyne is UNGODLY expensive.

---

<div class="post-metadata">

**Author:** ![philipe](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/bbe5ce/32.png) [@philipe](https://forum.gbfans.com/u/philipe)\
**Post date:** [June 11, 2006, 7:53am UTC](https://forum.gbfans.com/t/pke-electronics/800/4 "2006-06-11T07:53:08Z")

</div>

Thanks for the interest.

I haven’t got an exact cost for the project yet but definately less than $50 maybe even less than $30. (This is just for the servo controller circuit).

I’m still working on the LED chaser but this shouldn’t be expensive either.

Is this something people would be interested in purchasing. As I’ve already mentioned it isn’t movie accurate like the hyperdyne kit but would be significantly cheaper. Let e have your thoughts.

On another note this servo circuit could potentially be used in a trap project. Connecting the spindle of the control to the hinge of the pedal should mean that depressing the pedal will turn the spindle which will move the servo which would open the trap. Releasing the spring loaded pedal would turn the spindle back etc etc an close the trap door. Just an idea anyway.

---

<div class="post-metadata">

**Author:** ![marine3228](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/258eb7/32.png) [@marine3228](https://forum.gbfans.com/u/marine3228)\
**Post date:** [June 12, 2006, 3:46am UTC](https://forum.gbfans.com/t/pke-electronics/800/5 "2006-06-12T03:46:04Z")

</div>

I would be interested in a kit as well. Hyperdynes kits are awsome, but way to expensive. Mine doesn’t have to be 100% accurate, as long as the wings move up and down, with the lights flashing on the wings, and something on the green screen. I love hyperdyne kits, but I can make a [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) with lights for 400 dollars. Keep me posted. I would be interested, plus I have a static PKE you can use if you would like to run test to get it right.(of course would like to have it back once you get it working and get your kits going as well)

---

<div class="post-metadata">

**Author:** ![SlackerDaf](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/57b2e6/32.png) [@SlackerDaf](https://forum.gbfans.com/u/SlackerDaf)\
**Post date:** [June 12, 2006, 11:41am UTC](https://forum.gbfans.com/t/pke-electronics/800/6 "2006-06-12T11:41:48Z")

</div>

If this does come to fruition, I’d be interested in a kit as well. I’ve an [Iona shoe polisher](https://www.gbfans.com/wiki/equipment/pke-meter/iona-shoe-polisher) sat here gathering dust…

---

<div class="post-metadata">

**Author:** ![cmallon135](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/5daacb/32.png) [@cmallon135](https://forum.gbfans.com/u/cmallon135)\
**Post date:** [June 15, 2006, 12:23am UTC](https://forum.gbfans.com/t/pke-electronics/800/7 "2006-06-15T00:23:39Z")

</div>

I’d appreciate a kit big time. If I pay less for the electronics I could start looking towards buying a shell. They’re pretty expensive so a cost effective servo kit would be much appreciated. Let me know how things go.

---

<div class="post-metadata">

**Author:** ![philipe](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/bbe5ce/32.png) [@philipe](https://forum.gbfans.com/u/philipe)\
**Post date:** [June 15, 2006, 6:16pm UTC](https://forum.gbfans.com/t/pke-electronics/800/8 "2006-06-15T18:16:52Z")

</div>

Wow! Didn’t expect such a good response!!!

I wish I had a little more progress to report but unfortunetly the lights are caasung a slight headache.

At least all this feed back has given me an incentive to get cracking on!!!

---

<div class="post-metadata">

**Author:** ![SlackerDaf](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/57b2e6/32.png) [@SlackerDaf](https://forum.gbfans.com/u/SlackerDaf)\
**Post date:** [June 15, 2006, 7:36pm UTC](https://forum.gbfans.com/t/pke-electronics/800/9 "2006-06-15T19:36:53Z")

</div>

Good luck with it. If someone offers cheaper pke electronics, they’ll sell out. Not that there’s anything wrong with Hyperdyne’s, they’re just pricey!

---

<div class="post-metadata">

**Author:** ![Exoray](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/d26b3c/32.png) [@Exoray](https://forum.gbfans.com/u/Exoray)\
**Post date:** [June 16, 2006, 12:09am UTC](https://forum.gbfans.com/t/pke-electronics/800/10 "2006-06-16T00:09:45Z")

</div>

> [@](#):
>
> If someone offers cheaper pke electronics

If all the pieces of the puzzle fall into place in the next month of so, there very well could be an alternative out by this Halloween…

---

<div class="post-metadata">

**Author:** ![SlackerDaf](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/57b2e6/32.png) [@SlackerDaf](https://forum.gbfans.com/u/SlackerDaf)\
**Post date:** [June 16, 2006, 12:29am UTC](https://forum.gbfans.com/t/pke-electronics/800/11 "2006-06-16T00:29:47Z")

</div>

> [@Exoray](#):
>
> > [@](#):
> >
> > If someone offers cheaper pke electronics
> 
> If all the pieces of the puzzle fall into place in the next month of so, there very well could be an alternative out by this Halloween…

You’re a massive tease, Flynn.

---

<div class="post-metadata">

**Author:** ![Exoray](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/d26b3c/32.png) [@Exoray](https://forum.gbfans.com/u/Exoray)\
**Post date:** [June 16, 2006, 1:39am UTC](https://forum.gbfans.com/t/pke-electronics/800/12 "2006-06-16T01:39:56Z")

</div>

> [@](#):
>
> You’re a massive tease, Flynn.

I tease myself all the time 🙂

There are a lot of projects on the bench right now and I’m finally starting to dig into them… Working 16+ hour days has really put a cramp on the “hobby” time…

---

<div class="post-metadata">

**Author:** ![SlackerDaf](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/57b2e6/32.png) [@SlackerDaf](https://forum.gbfans.com/u/SlackerDaf)\
**Post date:** [June 16, 2006, 12:34pm UTC](https://forum.gbfans.com/t/pke-electronics/800/13 "2006-06-16T12:34:13Z")

</div>

> [@Exoray](#):
>
> > [@](#):
> >
> > You’re a massive tease, Flynn.
> 
> I tease myself all the time 🙂
> 
> There are a lot of projects on the bench right now and I’m finally starting to dig into them… Working 16+ hour days has really put a cramp on the “hobby” time…

I hear ya, man. As someone once told me, ‘working for a living, ain’t much of a living’

---

<div class="post-metadata">

**Author:** ![marine3228](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/258eb7/32.png) [@marine3228](https://forum.gbfans.com/u/marine3228)\
**Post date:** [June 20, 2006, 11:46pm UTC](https://forum.gbfans.com/t/pke-electronics/800/14 "2006-06-20T23:46:30Z")

</div>

Just curious on how much it is going to run and when will you have some avaiable? tired of looking at my static [PKE meter](https://www.gbfans.com/shop/mattel-pke-meter). would like it to be alive and running

---

<div class="post-metadata">

**Author:** ![philipe](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/bbe5ce/32.png) [@philipe](https://forum.gbfans.com/u/philipe)\
**Post date:** [June 27, 2006, 3:04pm UTC](https://forum.gbfans.com/t/pke-electronics/800/15 "2006-06-27T15:04:29Z")

</div>

Finished the circuit for the lights today - Hurrah!

Plugged the battery in only to fill the room with ghostly blue smoke!

I’ve already identified the problem and ordered replacement parts, hopefully these will be with me in a day or two.

Once I’ve finished this prototype circuit I’ll upload some photo’s so hopefully you’ll be able to see the kit in (some form of) action shortly.

---

<div class="post-metadata">

**Author:** ![marine3228](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/258eb7/32.png) [@marine3228](https://forum.gbfans.com/u/marine3228)\
**Post date:** [June 27, 2006, 3:11pm UTC](https://forum.gbfans.com/t/pke-electronics/800/16 "2006-06-27T15:11:44Z")

</div>

> [@philipe](#):
>
> Finished the circuit for the lights today - Hurrah!
> 
> Plugged the battery in only to fill the room with ghostly blue smoke!
> 
> I’ve already identified the problem and ordered replacement parts, hopefully these will be with me in a day or two.
> 
> Once I’ve finished this prototype circuit I’ll upload some photo’s so hopefully you’ll be able to see the kit in (some form of) action shortly.

Ah, the spirits weren’t too happy since you have found a way to detect them now.

what casued the smoke? too much power for the circuits or something else?

Hope it works out soon. Been dancing around like a little school girl waiting for a cheaper PKE electronics kit
