# PKE Meter Build + Appology

**URL:** <https://forum.gbfans.com/t/pke-meter-build-appology/15271>\
**Category:** PKE Meters\
**Created:** [March 14, 2014, 8:22pm UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271 "2014-03-14T20:22:45Z")\
**Posts on this page:** 15\
**Page:** 1

<div class="post-metadata">

**Author:** ![xaviorbat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/b3f665/32.png) [@xaviorbat](https://forum.gbfans.com/u/xaviorbat)\
**Post date:** [March 14, 2014, 8:22pm UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/1 "2014-03-14T20:22:45Z")

</div>

This is being Doubleposted to my [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) thread, but here is my PKE Build

https://www.youtube.com/embed/eF92NHQnGLk?feature=oembed&wmode=opaque

Again, sorry about how I acted yesterday.

---

<div class="post-metadata">

**Author:** ![xaviorbat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/b3f665/32.png) [@xaviorbat](https://forum.gbfans.com/u/xaviorbat)\
**Post date:** [March 15, 2014, 1:33am UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/2 "2014-03-15T01:33:30Z")

</div>

Posting some stills too

![image](http://img.tapatalk.com/d/14/03/15/za8y5ude.jpg)

![image](http://img.tapatalk.com/d/14/03/15/ere9u3ej.jpg)

---

<div class="post-metadata">

**Author:** ![venkman30](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/v/85e7bf/32.png) [@venkman30](https://forum.gbfans.com/u/venkman30)\
**Post date:** [March 15, 2014, 1:56am UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/3 "2014-03-15T01:56:50Z")

</div>

I really like the concept of putting the phone into a [pke meter](https://www.gbfans.com/shop/mattel-pke-meter) case. Very cool design and build. I love seeing home made builds.

---

<div class="post-metadata">

**Author:** ![PssdffJay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/pssdffjay/32/6529_2.png) [@PssdffJay](https://forum.gbfans.com/u/PssdffJay)\
**Post date:** [March 15, 2014, 2:08am UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/4 "2014-03-15T02:08:07Z")

</div>

Can I make a couple suggestions? Take them if you want, just ideas.

I don’t know how long the handle is, but you mentioned the whole until is quite long and would sit up under your arm. Are you able to trim the handle down? And maybe even make the USB sit inside the black cap at the bottom rather than stick out? I’ve broken USB cables before and that sucks when that happens.

And I can’t figure out what your antenna is made from. The part that the arms connect to. Do the arms move?

---

<div class="post-metadata">

**Author:** ![xaviorbat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/b3f665/32.png) [@xaviorbat](https://forum.gbfans.com/u/xaviorbat)\
**Post date:** [March 15, 2014, 2:27am UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/5 "2014-03-15T02:27:20Z")

</div>

Just shortened the handle while I was making pizza, the USB is stuck like that for now, it doesn’t entirely fit in the pipe, the antenna neither move or light, they’re for looks. They were originally meant to light up and that bombed so I nixed it

---

<div class="post-metadata">

**Author:** ![xaviorbat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/b3f665/32.png) [@xaviorbat](https://forum.gbfans.com/u/xaviorbat)\
**Post date:** [March 15, 2014, 2:28am UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/6 "2014-03-15T02:28:21Z")

</div>

Meant to put this in the previous post

![image](http://img.tapatalk.com/d/14/03/15/7yduzy9u.jpg)

---

<div class="post-metadata">

**Author:** ![PssdffJay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/pssdffjay/32/6529_2.png) [@PssdffJay](https://forum.gbfans.com/u/PssdffJay)\
**Post date:** [March 15, 2014, 2:32am UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/7 "2014-03-15T02:32:26Z")

</div>

What is this part originally? ![image](http://img.tapatalk.com/d/14/03/15/py2utuve.jpg)

What about some heat shrink tubing instead of the tape? If you do end up putting LEDs in that blink, you could cover it with heat shrink, cut little holes that the LEDs could fit through (may take some figuring out) and then shrink it.

---

<div class="post-metadata">

**Author:** ![PssdffJay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/pssdffjay/32/6529_2.png) [@PssdffJay](https://forum.gbfans.com/u/PssdffJay)\
**Post date:** [March 15, 2014, 2:33am UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/8 "2014-03-15T02:33:16Z")

</div>

Oh, there you go, a little more proportional.

---

<div class="post-metadata">

**Author:** ![xaviorbat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/b3f665/32.png) [@xaviorbat](https://forum.gbfans.com/u/xaviorbat)\
**Post date:** [March 15, 2014, 2:34am UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/9 "2014-03-15T02:34:17Z")

</div>

That piece was originally a hunk of metal from the project box I used to build this, took forever to fashion it, and the bottom piece. I wager the frustration with that contributed to yesterdays outburst

---

<div class="post-metadata">

**Author:** ![xaviorbat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/b3f665/32.png) [@xaviorbat](https://forum.gbfans.com/u/xaviorbat)\
**Post date:** [March 17, 2014, 9:31pm UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/10 "2014-03-17T21:31:03Z")

</div>

Testing some apps I put on the meter thought I’d post with this one

---

<div class="post-metadata">

**Author:** ![xaviorbat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/b3f665/32.png) [@xaviorbat](https://forum.gbfans.com/u/xaviorbat)\
**Post date:** [March 17, 2014, 9:33pm UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/11 "2014-03-17T21:33:30Z")

</div>

Phooey, the site’s signature overrode the app’s signature…have to research this and fix that

---

<div class="post-metadata">

**Author:** ![xaviorbat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/b3f665/32.png) [@xaviorbat](https://forum.gbfans.com/u/xaviorbat)\
**Post date:** [March 17, 2014, 10:19pm UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/12 "2014-03-17T22:19:02Z")

</div>

Test 2 to manage to get signature to post

---

<div class="post-metadata">

**Author:** ![xaviorbat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/b3f665/32.png) [@xaviorbat](https://forum.gbfans.com/u/xaviorbat)\
**Post date:** [March 17, 2014, 10:22pm UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/13 "2014-03-17T22:22:25Z")

</div>

Test 3

---

<div class="post-metadata">

**Author:** ![Higgs1](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/ba8739/32.png) [@Higgs1](https://forum.gbfans.com/u/Higgs1)\
**Post date:** [March 17, 2014, 10:59pm UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/14 "2014-03-17T22:59:18Z")

</div>

> [@xaviorbat](#):
>
> Test 3

Are you trying to see if it works with the “preview” button first? May save you from all these “test” posts, lol. Make sure its not over 500 characters too, may be an issue.

---

<div class="post-metadata">

**Author:** ![xaviorbat](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/x/b3f665/32.png) [@xaviorbat](https://forum.gbfans.com/u/xaviorbat)\
**Post date:** [March 18, 2014, 12:08am UTC](https://forum.gbfans.com/t/pke-meter-build-appology/15271/15 "2014-03-18T00:08:15Z")

</div>

The Android app doesn’t have one, I’m trying to get it to show the app signature
