# Plasma series Proton pack!?

**URL:** <https://forum.gbfans.com/t/plasma-series-proton-pack/18550>\
**Category:** Proton Packs\
**Created:** [September 5, 2020, 9:48am UTC](https://forum.gbfans.com/t/plasma-series-proton-pack/18550 "2020-09-05T09:48:58Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![jonogunn](https://forum.gbfans.com/user_avatar/forum.gbfans.com/jonogunn/32/186058_2.png) [@jonogunn](https://forum.gbfans.com/u/jonogunn)\
**Post date:** [September 14, 2020, 7:46am UTC](https://forum.gbfans.com/t/plasma-series-proton-pack/18550/21 "2020-09-14T07:46:46Z")

</div>

> [@VenomSymbiote post\_id=4939098 time=1599776656 user\_id=26767](#):
>
> > [@Mercifull post\_id=4939042 time=1599590871 user\_id=49451](#):
> >
> > This.
> > 
> > ![image](https://discdn.gbfans.com/original/3X/5/9/59b82101dd748c5948685f7dd8085ec41b7a8fdb.jpeg)
> > 
> > It’s just an adapter that you can attach a hose to. However there are no electrical contacts for any sort of wired connection to a pack regardless of manufacturer.
> 
> Yeah it wouldn’t give you any real control over what the lights and/or sound on the pack itself did. However you could just have the pack blink in the basic cyclotron circle and the blue power cell pulse. Have all that on a separate switch on the pack itself. So you’d be walking around with your pack flashing and then just pull out the wand when you want to make some busting noise. I’d hope the pack could come with the theme song too but I’ve no idea how high that’d raise the cost. I can just stick the song on my phone anyway so it’s a nonissue.

This is exactly what I plan on doing with my EVA Foam pack I made.

The whole arduino lights and sound stuff was a headache to learn and hard to find direct tutorials. There was only one YouTube video I found that showed almost step by step how to set up [power cell](https://www.gbfans.com/wiki/equipment/proton-pack/power-cell) and [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) lights on the pack so I was able to get that going.

I was struggling getting my 3D wand to look and do the things I want it to. Didn’t know how to do lights and sound. Couldn’t find a proper sized clear acrylic tube for a decent price. And I really like the look of the wand with the tube retracted but I couldn’t figure out how to do that as well and I was quite discouraged. (I finished the pack in February but have been u motivated to finish the wand).

So I give up and I’m just gonna have a switch for the pack lights attached at the bottom of the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) by my lower part of the Alice frame and attach the neutrona wand and be done with it!

---

<div class="post-metadata">

**Author:** ![Zantsumei](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/z/85e7bf/32.png) [@Zantsumei](https://forum.gbfans.com/u/Zantsumei)\
**Post date:** [September 17, 2020, 8:30pm UTC](https://forum.gbfans.com/t/plasma-series-proton-pack/18550/22 "2020-09-17T20:30:28Z")

</div>

Ok guys, I got my Plasma Series wand… only issue is now, when I switch modes and press the fire button the LEDS wont fade away when i let go of the fire button… sometimes it just freezes and the LEDS wont stop until i shake it lightly or turn the unit off…SOMETIMES if I lightly hit the side or shake it it will function normally… when fired it creates a beam and fires as it should… the correct colors appear for the correct modes. green/blue/orange/purple So i think there maybe is a cold solder point somewhere in the gun thats lose? where would i even look for something like this… ?

---

<div class="post-metadata">

**Author:** ![one-time](https://forum.gbfans.com/user_avatar/forum.gbfans.com/one-time/32/188339_2.png) [@one-time](https://forum.gbfans.com/u/one-time)\
**Post date:** [September 24, 2020, 7:16pm UTC](https://forum.gbfans.com/t/plasma-series-proton-pack/18550/23 "2020-09-24T19:16:18Z")

</div>

> [@Zantsumei post\_id=4939323 time=1600374628 user\_id=49874](#):
>
> Ok guys, I got my Plasma Series wand… only issue is now, when I switch modes and press the fire button the LEDS wont fade away when i let go of the fire button… sometimes it just freezes and the LEDS wont stop until i shake it lightly or turn the unit off…SOMETIMES if I lightly hit the side or shake it it will function normally… when fired it creates a beam and fires as it should… the correct colors appear for the correct modes. green/blue/orange/purple So i think there maybe is a cold solder point somewhere in the gun thats lose? where would i even look for something like this… ?

I’d just return it and get one that works right.

[Previous page](https://forum.gbfans.com/t/plasma-series-proton-pack/18550.md?page=1)
