# Possible ECTO 1? **URL:** \ **Category:** Ectomobiles\ **Created:** [March 11, 2013, 9:43pm UTC](https://forum.gbfans.com/t/possible-ecto-1/31039 "2013-03-11T21:43:38Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![hardgrave](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/71e660/32.png) [@hardgrave](https://forum.gbfans.com/u/hardgrave)\ **Post date:** [March 11, 2013, 9:43pm UTC](https://forum.gbfans.com/t/possible-ecto-1/31039/1 "2013-03-11T21:43:38Z")
Hi, I have been looking all around to find something that could be used as an ECTO 1, not being in the US etc I’m quite limited to what I can find or use. I know that there is no way I could ever afford to import the correct car for ECTO, but I have found something that could be used? Its a 74 Cadillac Miller Meteor traditional Landau hearse and apart from the flair at the rear looks ok although the front is different also. The idea would be to cut out new rear windows and get rid of the vinyl roof, and re spray white. Everything else would be as close to the real ECTO as I can get. any pros or con’s from the floor?? ---
**Author:** ![Keith33W](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/7993a0/32.png) [@Keith33W](https://forum.gbfans.com/u/Keith33W)\ **Post date:** [March 11, 2013, 11:01pm UTC](https://forum.gbfans.com/t/possible-ecto-1/31039/2 "2013-03-11T23:01:19Z")
I definitely would recommend removing the vinyl so it won’t retain moisture and cause rust, especially if its going to be stored outside. Less windows also mean less visibility. Try to find images of your car that was built with the windows so you’ll know how it should look. Hope this helps ---
**Author:** ![Ecto-1\_fan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/7ea924/32.png) [@Ecto-1\_fan](https://forum.gbfans.com/u/Ecto-1_fan)\ **Post date:** [March 11, 2013, 11:15pm UTC](https://forum.gbfans.com/t/possible-ecto-1/31039/3 "2013-03-11T23:15:07Z")
Well, it will probably look pretty similar to these 2: > **[So...this is my ECTO, The ECTO 1 PR](https://forum.gbfans.com/viewtopic.php?f=13&t=29691)** > > Made out of a 76 hearse. I know the rack is not accurate and the lightbars are red instead of blue but I used what I had in hand to create it but I’m planning on fixing everything on the way. I’m no mechanic or iron worker :whatever: Anywway, here... > **[My Ecto build Modeled after 1a](https://forum.gbfans.com/viewtopic.php?f=13&t=30051)** > > Ok, So after 20 years “Phase 1” i begin phase 2, I purchased my Car that will become Ecto 2.0 . She’s a 1992 Cadillac Brougham Hearse, in very good condition. I plan to model her after 1a, with some Modern components, moreso inside than out. This is... So, it can be pulled off with success. You **will** have a bit of work to do though. Here’s another one. It’s a little different, but shows that you can still build a decent car without the identical model. > **[AZ Ghostbusters Ecto Project \*Vigo Moving & Storage\* 5/30/10](https://forum.gbfans.com/viewtopic.php?f=13&t=3782)** > > The Arizona Ghostbusters finally have wheels, well a work in proress at least. She’s a 1972 Pontiac Bonneville Superior Ambulance. She was found up in Colorado near the four corners, just off Route 666 and purchased for 1000 dollars. It’s going to... Good luck! ---
**Author:** ![Chace](https://forum.gbfans.com/user_avatar/forum.gbfans.com/chace/32/156_2.png) [@Chace](https://forum.gbfans.com/u/Chace)\ **Post date:** [March 11, 2013, 11:26pm UTC](https://forum.gbfans.com/t/possible-ecto-1/31039/4 "2013-03-11T23:26:21Z")
Please don’t cut up a perfectly good 74… ---
**Author:** ![hardgrave](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/71e660/32.png) [@hardgrave](https://forum.gbfans.com/u/hardgrave)\ **Post date:** [March 12, 2013, 12:48am UTC](https://forum.gbfans.com/t/possible-ecto-1/31039/5 "2013-03-12T00:48:37Z")
> [@Chace](#): > > Please don’t cut up a perfectly good 74… After having a look at the first link, which has left me breathless I would be happy not to cut out windows and just have the “fake” windows instead, also as Chace said, it be a shame to cut it and it would still keep its value if it was still pretty much the same. I will research this fully before jumping in but feeling a lot better about it looking great even if not the correct type.