# Progress!!.....

**URL:** <https://forum.gbfans.com/t/progress/27233>\
**Category:** Uniforms\
**Created:** [August 20, 2009, 10:13pm UTC](https://forum.gbfans.com/t/progress/27233 "2009-08-20T22:13:54Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [August 20, 2009, 10:13pm UTC](https://forum.gbfans.com/t/progress/27233/1 "2009-08-20T22:13:54Z")

</div>

A lot of big work won’t start until next week, when I’ll have the flightsuit, pack, trap, [belt gizmo](https://www.gbfans.com/wiki/equipment/uniform/calculator-circuit-board), etc to add, but I’ve been slowly accumulating bits for my outfit, and I put together everything I’ve gotten so far today:

-Belt loops, gloves, and pack hose from GBfans shop

-Pistol Belt from Amazon

-Alice Pack frame from Allegheny Surplus

-Glow-in-the-dark T-shirt from [80stees.com](http://80stees.com)

-Elbow pads from eBay

-Boots are the Steel-toed Brahma “SWAT” style from Wal-mart

I’m also wearing my old Kenwood ham radio walkie (on my right hip, not visible). It’s not a perfect match for the MT-500, but it’s an older brick-like model from the early 80’s and works well enough. I’ll post updates as it comes along, should have some Goggles tomorrow. Thanks to AJ Quick, Slimer7, irricanian, and UltimateGBfan for all of their help!

---

<div class="post-metadata">

**Author:** ![abntroop](https://forum.gbfans.com/user_avatar/forum.gbfans.com/abntroop/32/3985_2.png) [@abntroop](https://forum.gbfans.com/u/abntroop)\
**Post date:** [August 20, 2009, 11:31pm UTC](https://forum.gbfans.com/t/progress/27233/2 "2009-08-20T23:31:35Z")

</div>

right on, nothin like sittin, waitin on stuff 2 show up in the mail 🙂

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [August 21, 2009, 4:34am UTC](https://forum.gbfans.com/t/progress/27233/3 "2009-08-21T04:34:06Z")

</div>

> [@abntroop](#):
>
> right on, nothin like sittin, waitin on stuff 2 show up in the mail 🙂

Oh, boy, do I know it! Can’t wait for it all to get here and come together!

---

<div class="post-metadata">

**Author:** ![abntroop](https://forum.gbfans.com/user_avatar/forum.gbfans.com/abntroop/32/3985_2.png) [@abntroop](https://forum.gbfans.com/u/abntroop)\
**Post date:** [August 21, 2009, 4:48am UTC](https://forum.gbfans.com/t/progress/27233/4 "2009-08-21T04:48:46Z")

</div>

Yeah, I bet. I feel the same way at the start of every project. Look forward to seein your progress

---

<div class="post-metadata">

**Author:** ![toylord](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/dec6dc/32.png) [@toylord](https://forum.gbfans.com/u/toylord)\
**Post date:** [August 21, 2009, 9:05pm UTC](https://forum.gbfans.com/t/progress/27233/5 "2009-08-21T21:05:45Z")

</div>

It’s hard to resist trying on all the stuff each time you get or finish a new piece! I’ve certainly been there!

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [August 22, 2009, 1:47am UTC](https://forum.gbfans.com/t/progress/27233/6 "2009-08-22T01:47:32Z")

</div>

> [@toylord](#):
>
> It’s hard to resist trying on all the stuff each time you get or finish a new piece! I’ve certainly been there!

No kidding! I wore my goggles today until a little bit of the paint turned my forehead black.

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [August 22, 2009, 9:52pm UTC](https://forum.gbfans.com/t/progress/27233/7 "2009-08-22T21:52:46Z")

</div>

A quick updates with a couple of pics from my phone.

Here are the goggles, along with the aforementioned Kenwood walkie subbing for the MT-500:

 ![image](https://discdn.gbfans.com/original/2X/0/0dc0d846958716f152ebbdb85283dcf611bc8e81.jpeg)

And here’s a picture of my 3-year-old daughter wearing the goggles. Gotta start 'em early!

 ![image](https://discdn.gbfans.com/original/2X/4/4ae5cb264b0c729c8581a262545cf87a45eb613c.jpeg)

---

<div class="post-metadata">

**Author:** ![kind2311](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kind2311/32/187468_2.png) [@kind2311](https://forum.gbfans.com/u/kind2311)\
**Post date:** [August 22, 2009, 10:34pm UTC](https://forum.gbfans.com/t/progress/27233/8 "2009-08-22T22:34:43Z")

</div>

lookin’ good there, spider girl!

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [August 23, 2009, 8:09pm UTC](https://forum.gbfans.com/t/progress/27233/9 "2009-08-23T20:09:17Z")

</div>

I’m thinking of replacing the metal part on one side of our goggles with a piece of painted PVC.. the metal part same as you used) makes them very front heavy.

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [August 24, 2009, 5:10am UTC](https://forum.gbfans.com/t/progress/27233/10 "2009-08-24T05:10:57Z")

</div>

> [@Gareee](#):
>
> I’m thinking of replacing the metal part on one side of our goggles with a piece of painted PVC.. the metal part same as you used) makes them very front heavy.

Yeah, they are a little front heavy, but not enough to be an issue if I’m just wearing them up on my head, and as long as I don’t whip my head around they stay just fine when using them as actual goggles.

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [August 24, 2009, 2:32pm UTC](https://forum.gbfans.com/t/progress/27233/11 "2009-08-24T14:32:06Z")

</div>

That was actually my concern.. then slipping down a bit when wearing them up.

I’ll see what I can come up with later today.

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [August 26, 2009, 4:50am UTC](https://forum.gbfans.com/t/progress/27233/12 "2009-08-26T04:50:03Z")

</div>

> [@Gareee](#):
>
> That was actually my concern.. then slipping down a bit when wearing them up.
> 
> I’ll see what I can come up with later today.

Yeah, Mine are fine when worn up, at least on my head. Even with the strap tightened, my daughter kept having them fall down onto her face. Didn’t stop her from wanting to wear them all day though :lol

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [August 26, 2009, 5:25am UTC](https://forum.gbfans.com/t/progress/27233/13 "2009-08-26T05:25:56Z")

</div>

It turned out that replacing that part was pretty easy. I just cut a sliver off a larger piece of pvc pipe, cut another for the main shaft, and then sanded the main shaft down some so the larger part could slip over it.

I made the knob out of a piece of dowel, and a small toy part… the difference in weight does make a BIG difference, and was well worth the work. (I did it for both our pairs of goggles.)

One thing I’m not liking, though, is the inkjet ink from our printer is turning a bit reddish.. I might have to replace those at some future point in time.

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [August 26, 2009, 8:20am UTC](https://forum.gbfans.com/t/progress/27233/14 "2009-08-26T08:20:50Z")

</div>

Oh, very nice work! I’ve been toying with the idea of adding the top strap to mine, since that would fix the weight issue when actually wearing the goggles. We’ll see.

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [August 26, 2009, 1:32pm UTC](https://forum.gbfans.com/t/progress/27233/15 "2009-08-26T13:32:22Z")

</div>

The top strap was pretty easy..and does make a BIG difference in comfort while wearing it. Cloth stores have that buckle we used.

Proper front connections though are triangular. Since I had no idea where I’d even find something like that, I just cut the slot in it instead. If I can ever find that triangular strap connection somewhere, it should cover that slot up anyway.

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [August 26, 2009, 7:02pm UTC](https://forum.gbfans.com/t/progress/27233/16 "2009-08-26T19:02:25Z")

</div>

> [@Gareee](#):
>
> The top strap was pretty easy..and does make a BIG difference in comfort while wearing it. Cloth stores have that buckle we used.
> 
> Proper front connections though are triangular. Since I had no idea where I’d even find something like that, I just cut the slot in it instead. If I can ever find that triangular strap connection somewhere, it should cover that slot up anyway.

Awesome, I’ll have to look into that. Drop me a line if you find the triangular straps, so I know where to go looking..

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [August 26, 2009, 11:12pm UTC](https://forum.gbfans.com/t/progress/27233/17 "2009-08-26T23:12:56Z")

</div>

Will do!

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [August 29, 2009, 5:57pm UTC](https://forum.gbfans.com/t/progress/27233/18 "2009-08-29T17:57:07Z")

</div>

[Flight suit](https://www.gbfans.com/wiki/equipment/uniform) arrived today, and while it’s WAY too small, I had to get everything together to try on.

Too tight flight suit looks bad! :lol: No worries though, I have it listed for sale in the FS section:

> **[GBFans.com](https://forum.gbfans.com/viewtopic.php?f=31&t=15319)**

This was a 44S, got a 48R on the way that should fit better.

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [August 29, 2009, 8:23pm UTC](https://forum.gbfans.com/t/progress/27233/19 "2009-08-29T20:23:30Z")

</div>

Yeah I went through two suits before I got the proper size. Fortunately, you can resell them pretty fast.

Yer gettin there!

BTW, when you get the proper size, if you know someone with a sweing machine, have them sew the [nametag](https://www.gbfans.com/shop/gb1-name-tag-patch) on. Sewing the patches on by hand is a bitch.

Also, note how low the arm patch should actually be.. the first time we put ours on, they were way too high. (Yours looks about right there.)

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [August 29, 2009, 8:50pm UTC](https://forum.gbfans.com/t/progress/27233/20 "2009-08-29T20:50:31Z")

</div>

> [@Gareee](#):
>
> Yeah I went through two suits before I got the proper size. Fortunately, you can resell them pretty fast.
> 
> Yer gettin there!
> 
> BTW, when you get the proper size, if you know someone with a sweing machine, have them sew the nametag on. Sewing the patches on by hand is a bitch.
> 
> Also, note how low the arm patch should actually be.. the first time we put ours on, they were way too high. (Yours looks about right there.)

I’m trying!

My wife has a sewing machine here at the house, so the patches are the least of my worries. I just pinned them in place real quick to get an idea of how everything looked together.

Still waiting on my pack from Slimer7, trap kit, [belt gizmo](https://www.gbfans.com/wiki/equipment/uniform/calculator-circuit-board), parts, labels, and other goodies should be ready in a couple weeks from irricanian, I’ve got a larger [flight suit](https://www.gbfans.com/wiki/equipment/uniform) ordered, an MT500 on the way, one of momerath’s leather MT500 holsters ordered, and I’m waiting on a refund from a suit seller that auctioned off a 48R on ebay, I bought it, and now he says he doesn’t have it in stock. He promised me I’d have my refund today, but SURPRISE, nothing yet.

It seems like the hardest part of this whole process is the WAITING.

[Next page](https://forum.gbfans.com/t/progress/27233.md?page=2)
