# Proton Pack Electronics

**URL:** <https://forum.gbfans.com/t/proton-pack-electronics/15909>\
**Category:** Proton Packs\
**Created:** [March 20, 2024, 9:34pm UTC](https://forum.gbfans.com/t/proton-pack-electronics/15909 "2024-03-20T21:34:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Opus\_Penguin](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/o/dc4da7/32.png) [@Opus\_Penguin](https://forum.gbfans.com/u/Opus_Penguin)\
**Post date:** [March 20, 2024, 9:34pm UTC](https://forum.gbfans.com/t/proton-pack-electronics/15909/1 "2024-03-20T21:34:55Z")

</div>

I may have another dumb question, but I have the Wand Lights, Pack Lights, and Pack Blaster. I have them all wired but am unclear where specifically the power should be put to them. I know how to set up the speaker, but power could go to Pack Lights and Wand Lights. I am not sure if it should go to the Pack Blaster instead, and if so, where? Thanks.

---

<div class="post-metadata">

**Author:** ![captainassholay](https://forum.gbfans.com/user_avatar/forum.gbfans.com/captainassholay/32/187154_2.png) [@captainassholay](https://forum.gbfans.com/u/captainassholay)\
**Post date:** [March 20, 2024, 9:49pm UTC](https://forum.gbfans.com/t/proton-pack-electronics/15909/2 "2024-03-20T21:49:19Z")

</div>

Refer to the instructions on the store page, they’ll guide you through that.

[https://www.gbfans.com/images/shop/packsoundboardinstructions\_v2.pdf](https://www.gbfans.com/images/shop/packsoundboardinstructions_v2.pdf)

---

<div class="post-metadata">

**Author:** ![prodestrian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/prodestrian/32/186836_2.png) [@prodestrian](https://forum.gbfans.com/u/prodestrian)\
**Post date:** [March 21, 2024, 12:01am UTC](https://forum.gbfans.com/t/proton-pack-electronics/15909/3 "2024-03-21T00:01:49Z")

</div>

The power connectors on the wand board are only for standalone use (ie if you want to have your wand disconnected from your pack). Otherwise it gets its power from the Pack Blaster, as do the pack lights themselves.

In addition to the Pack Blaster instructions there’s also documentation for the wand lights, if you didn’t already have them - [http://www.gbfans.com/images/shop/wandlightinstructions.pdf](http://www.gbfans.com/images/shop/wandlightinstructions.pdf)

In both you can ignore any instructions for “standalone mode”. You’ve got the entire kit so you don’t need that, everything will be fully integrated and powered from a single power supply.