# Putting a Hyperdyne kit into a GuntahKela PKE shell Tutorial

**URL:** <https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685>\
**Category:** PKE Meters\
**Created:** [October 20, 2009, 7:20am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685 "2009-10-20T07:20:50Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [October 20, 2009, 7:20am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/1 "2009-10-20T07:20:50Z")

</div>

I didn’t see anything like this when I was looking the other day, so I’m starting my own. I only have the GK shell so far, hoping the hyperdyne kit I paid for will get here in time for Halloween, but regardless, I’ll document the process. I got the kit “a la carte” so you’ll get the added bonus of learning how to cut and assemble the wing PCBs, LEDS, and installing the servos.

Anyway, got GK’s upgraded PKE kit today:

![image](http://www.gbfans.com/images/pb/Peaugh/DSCF2529.jpg)

VERY nice. Holes are all pre-drilled, kit comes pre-sanded/cleaned up, with all LED holes cut, so into the soapy water it went to finish cleaning off any mold residue:

![image](http://www.gbfans.com/images/pb/Peaugh/DSCF2532.jpg)

then just let it dry fully:

![image](http://www.gbfans.com/images/pb/Peaugh/DSCF2533.jpg)

Once it dried, I cleaned out and widened the screen opening, and trimmed some flash from the screen itself to get a nice fit. I also drilled two small holes in the bottom of the handle on the back piece, then bent a small piece of thick coat hanger to make a loop for hanging the PKE from my belt. Then, on to paint! I forgot to take a picture of the primer stage, but I follow irricanian’s painting advice. I got primer, silver, and black spray paint from the same company (Krylon, in this case): Two coats of primer with some light sanding in between, then one coat of silver:

![image](http://www.gbfans.com/images/pb/Peaugh/DSCF2537.jpg)

I went ahead and did a second coat of silver on the parts that were staying silver, then did a coat of black on the main bits:

![image](http://www.gbfans.com/images/pb/Peaugh/DSCF2540.jpg)

Here’s a shot of the painted parts on my work table:

![image](http://www.gbfans.com/images/pb/Peaugh/DSCF2542.jpg)

You can see the belt clip loop I added in this pic. I leave you with a quick shot of the pieces hand assembled to check the look:

![image](http://www.gbfans.com/images/pb/Peaugh/DSCF2544.jpg)

That’s all for now, I’ll update again when the hyperdyne kit gets here!!

---

<div class="post-metadata">

**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/188008_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\
**Post date:** [October 20, 2009, 4:56pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/2 "2009-10-20T16:56:48Z")

</div>

I can’t wait to see how this goes.

I’ve got a GK Kit on the way.. and will totally go the Hyperdyne electronics route if your install goes good!

---

<div class="post-metadata">

**Author:** ![Krenzy](https://forum.gbfans.com/user_avatar/forum.gbfans.com/krenzy/32/5873_2.png) [@Krenzy](https://forum.gbfans.com/u/Krenzy)\
**Post date:** [October 20, 2009, 5:00pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/3 "2009-10-20T17:00:56Z")

</div>

> [@AJ Quick](#):
>
> I can’t wait to see how this goes.
> 
> I’ve got a GK Kit on the way.. and will totally go the Hyperdyne electronics route if your install goes good!

I second everything AJ said. My kit should be here today, or pretty damn quickly, and as of right now Hyperdyne is the only available maker for the PKE kit, and since he’s dropped the price a tad, if your build goes well, I’m going this route too.

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [October 20, 2009, 5:38pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/4 "2009-10-20T17:38:38Z")

</div>

Thanks guys, I hope I manage not to screw it up. Now everyone cross your fingers and wish for my electronics from Hyperdyne to get here fast!

---

<div class="post-metadata">

**Author:** ![Krenzy](https://forum.gbfans.com/user_avatar/forum.gbfans.com/krenzy/32/5873_2.png) [@Krenzy](https://forum.gbfans.com/u/Krenzy)\
**Post date:** [October 20, 2009, 5:47pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/5 "2009-10-20T17:47:20Z")

</div>

Shell just arrived at my doorstep!

I do hope the electronics arrive quickly, and also I’m interested to see how you will be cutting the wingboards.

EDIT: Also, can you let me in on how you got the lense to mount? My lense is too big, and I’m not sure how much to trim..

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [October 20, 2009, 7:01pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/6 "2009-10-20T19:01:58Z")

</div>

> [@Krenzy](#):
>
> Shell just arrived at my doorstep!
> 
> I do hope the electronics arrive quickly, and also I’m interested to see how you will be cutting the wingboards.
> 
> EDIT: Also, can you let me in on how you got the lense to mount? My lense is too big, and I’m not sure how much to trim..

I just shaved off tiny slivers from each side until it fit, and a little from the edges on the backside. Just shave off small bits at a time and constantly check your fit. Patience is really the key here. Mine fits perfectly now. Easy to pop in and yet fits super snug so I could just push it in and not worry about it falling out at all, although I’ll likely glue it in when final assembly comes around.

---

<div class="post-metadata">

**Author:** ![Krenzy](https://forum.gbfans.com/user_avatar/forum.gbfans.com/krenzy/32/5873_2.png) [@Krenzy](https://forum.gbfans.com/u/Krenzy)\
**Post date:** [October 20, 2009, 7:02pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/7 "2009-10-20T19:02:58Z")

</div>

Sounds good, thanks bud!

---

<div class="post-metadata">

**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\
**Post date:** [October 20, 2009, 11:44pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/8 "2009-10-20T23:44:06Z")

</div>

I’ve got one of these on the way as well, it looks like a nice clean casting. Always wanted a PKE and since it doesn’t look like my “other” one will ever come thru I went for GK’s kit, can’t wait to see it.

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [October 21, 2009, 5:33am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/9 "2009-10-21T05:33:17Z")

</div>

Well, now we know where all those PKE kits went! Just got word from Jim over at Hyperdyne that he’s planning to ship my kit within the next couple of days, so hopefully this will get done by halloween, AND there should be a full step-by-step of the install early next week.

---

<div class="post-metadata">

**Author:** ![Cornelius](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/e19adc/32.png) [@Cornelius](https://forum.gbfans.com/u/Cornelius)\
**Post date:** [October 21, 2009, 2:00pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/10 "2009-10-21T14:00:54Z")

</div>

Should be interesting! Looking forward to this tutorial! I merely have an Iona as yet, but am definitely planning to make a PKE in the (hopefully near) future; I’m kind of hoping that Exoray will be making a PKE kit (and then at the same time hoping that it will be a bit less expensive than Hyperdyne’s…)

Regards,

CK

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [October 22, 2009, 4:39am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/11 "2009-10-22T04:39:51Z")

</div>

Just got a tracking number for my kit from Jim at Hyperdyne, so it looks like we should be putting this together in a few days.

---

<div class="post-metadata">

**Author:** ![janderson392](https://forum.gbfans.com/user_avatar/forum.gbfans.com/janderson392/32/182343_2.png) [@janderson392](https://forum.gbfans.com/u/janderson392)\
**Post date:** [October 25, 2009, 2:00pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/12 "2009-10-25T14:00:14Z")

</div>

I will be watching this as well. I just got the guntahkela kit and I want to find out about attatching the two halves and mounting the wings as well.

---

<div class="post-metadata">

**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/188008_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\
**Post date:** [October 25, 2009, 4:46pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/13 "2009-10-25T16:46:18Z")

</div>

What servos are you guys using?

I just ordered the Light Kit from [Hyperdyne Labs](http://www.hyperdynelabs.com/) and am now looking for Micro Servos at [TowerHobbies](http://www3.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=micro+servo).

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [October 26, 2009, 10:08pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/14 "2009-10-26T22:08:23Z")

</div>

> [@AJ Quick](#):
>
> What servos are you guys using?
> 
> I just ordered the Light Kit from [Hyperdyne Labs](http://www.hyperdynelabs.com/) and am now looking for Micro Servos at [TowerHobbies](http://www3.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=micro+servo).

I used the cirrus 102’s I got from the Hyperdyne site.

Kit got here on saturday was I was out camping, Worked on it yesterday afternoon and today and finally got it working. It’s a good kit, a few tricks to it, mine’s temperamental but only because I had to redo a couple bits and it didn’t turn out as cleanly as I would have liked. Still, working [PKE meter](https://www.gbfans.com/shop/mattel-pke-meter)! I’ll try to get the pics and step-by-step up tomorrow, although it turns out the instructions that come with the kit pretty much cover everything you need to know.

---

<div class="post-metadata">

**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/188008_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\
**Post date:** [October 26, 2009, 10:26pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/15 "2009-10-26T22:26:07Z")

</div>

Do the 102’s fit both the shell and the wings without any modifications? That’s the main thing I am looking for.. a servo with the appropriate end attachment and something that is small enough to fit in there.

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [October 27, 2009, 2:31am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/16 "2009-10-27T02:31:17Z")

</div>

> [@AJ Quick](#):
>
> Do the 102’s fit both the shell and the wings without any modifications? That’s the main thing I am looking for.. a servo with the appropriate end attachment and something that is small enough to fit in there.

They fit the wings just fine. GuntahKela’s new wings let the crossbar just slide right into place to move the wing itself. I had to dremel out a bit of the material inside to let the cirrus servos sit low enough so the wings fit into place properly in the slots, but nothing major.

Here’s a video of the finished PKE:

[http://www.youtube.com/watch?v=TifBzCz8s7E](http://www.youtube.com/watch?v=TifBzCz8s7E)

The wing on the right I had to pull apart to fix a wiring issue, so I need to redo the paint, bit otherwise good to go!

---

<div class="post-metadata">

**Author:** ![exo95er](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/e47774/32.png) [@exo95er](https://forum.gbfans.com/u/exo95er)\
**Post date:** [October 27, 2009, 9:42am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/17 "2009-10-27T09:42:55Z")

</div>

Congratulations! Nice to see a “fully functioning” [PKE meter](https://www.gbfans.com/shop/mattel-pke-meter). 🆒

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [October 28, 2009, 3:44am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/18 "2009-10-28T03:44:33Z")

</div>

> [@exo95er](#):
>
> Congratulations! Nice to see a “fully functioning” PKE meter. 🆒

Thanks! I had to pull it apart again and just went nuts and completely rewired the wing boards, and now it’s great! I keep forgetting to pull the pics off my camera and do the actual tutorial bit, but now that I’ve got everything squared away on the PKE, I’ll try to get the pics up this afternoon.

---

<div class="post-metadata">

**Author:** ![Krenzy](https://forum.gbfans.com/user_avatar/forum.gbfans.com/krenzy/32/5873_2.png) [@Krenzy](https://forum.gbfans.com/u/Krenzy)\
**Post date:** [October 28, 2009, 11:23am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/19 "2009-10-28T11:23:58Z")

</div>

Ok, so number one, get those pics up. Number two, why are you having to rewire everything?? This kind of scares me, as this was a road I was planning on taking.

---

<div class="post-metadata">

**Author:** ![Peaugh](https://forum.gbfans.com/user_avatar/forum.gbfans.com/peaugh/32/6114_2.png) [@Peaugh](https://forum.gbfans.com/u/Peaugh)\
**Post date:** [October 28, 2009, 5:11pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/20 "2009-10-28T17:11:11Z")

</div>

> [@Krenzy](#):
>
> Ok, so number one, get those pics up. Number two, why are you having to rewire everything?? This kind of scares me, as this was a road I was planning on taking.

Pics are uploading now.

As for the wiring, all my fault. I originally wired everything under the assumption that the wires on the led [ribbon cable](https://www.gbfans.com/wiki/equipment/proton-pack/ribbon-cable), from left to right, were numbers 1-2-3-4-5-6-7-8, and they were actually 2-1-4-3-6-5-8-7. So when I rewird, having already filled the holes with solder, I just did contact connections, so the wires would end up crossing when thewings moved and screwing up the light sequence. So when you get your kit, print out the PDF and wire the wires EXACTLY the way you see them in the instructions and you won’t have any problems. It’s actually quite easy, it was only hard for me because I went into it without double checking.

[Next page](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685.md?page=2)
