# Putting a Hyperdyne kit into a GuntahKela PKE shell Tutorial

**URL:** <https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685>\
**Category:** PKE Meters\
**Created:** [October 20, 2009, 7:20am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685 "2009-10-20T07:20:50Z")\
**Posts on this page:** 19\
**Page:** 4

<div class="post-metadata">

**Author:** ![Indianapolis\_Ghostbu](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/8c91f0/32.png) [@Indianapolis\_Ghostbu](https://forum.gbfans.com/u/Indianapolis_Ghostbu)\
**Post date:** [June 10, 2010, 7:41pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/61 "2010-06-10T19:41:27Z")

</div>

My wires have been breaking everytime I turn around.

---

<div class="post-metadata">

**Author:** ![121-gigawatts](https://forum.gbfans.com/user_avatar/forum.gbfans.com/121-gigawatts/32/186036_2.png) [@121-gigawatts](https://forum.gbfans.com/u/121-gigawatts)\
**Post date:** [June 10, 2010, 7:45pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/62 "2010-06-10T19:45:27Z")

</div>

The actual wires or the solder?

---

<div class="post-metadata">

**Author:** ![ChapterMasterTuShan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@ChapterMasterTuShan](https://forum.gbfans.com/u/ChapterMasterTuShan)\
**Post date:** [June 11, 2010, 12:03am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/63 "2010-06-11T00:03:50Z")

</div>

You can wire wrap instead of soldering…

---

<div class="post-metadata">

**Author:** ![Indianapolis\_Ghostbu](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/8c91f0/32.png) [@Indianapolis\_Ghostbu](https://forum.gbfans.com/u/Indianapolis_Ghostbu)\
**Post date:** [June 11, 2010, 3:30pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/64 "2010-06-11T15:30:08Z")

</div>

The actual wires have been breaking… Now I am having trouble getting the wing lights to fit in the wings and not hit the other electronics when they extend. And the ribbon wire that is on mine is different from the one in the picture, mine is more like the one on the front of the trap pedal. And very stiff.

---

<div class="post-metadata">

**Author:** ![Indianapolis\_Ghostbu](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/8c91f0/32.png) [@Indianapolis\_Ghostbu](https://forum.gbfans.com/u/Indianapolis_Ghostbu)\
**Post date:** [June 11, 2010, 3:38pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/65 "2010-06-11T15:38:03Z")

</div>

> [@Peaugh](#):
>
> > [@AJ Quick](#):
> >
> > I got my Hyperdyne Labs kit today! That was quick!
> > 
> > I noticed that mine is a little different from yours as it uses new smaller chips or something. My main question is.. how do the circuit boards fit into the wings? I didn’t get those.. but would you recommend them?
> > 
> > All I got with my kit was some wire and no LEDs.. so I’m wondering which would be the best method? Circuit Board wings or just wires running through the wings?
> > 
> > Also.. one thing I noticed is that the speaker is annoying! Did you think about covering it up a little bit so it isn’t as loud?
> 
> Once you shape the circuit boards, just test fit them into the wing halves. I had to clear a little material our of the inside of the wings to make them fit, but not much, and then you just epoxy the wing halves together around the boards. Easy peasy.
> 
> As for method, either one (circuit boards or wires) should work fine, there’s enough room in the wings to just run wires if you wish.
> 
> As for the speaker, I find it’s not nearly so annoying once you have it encased in the shell, but you could certainly put a piece of duct or electrical tape over it to muffle it if you wish.
> 
> Cornelius - I’ll see what I can do about retaking some of those pics for you.

Are there any schematics for just running wires and LEDs? That would proly be easier than the PCB Boards in the wings.

---

<div class="post-metadata">

**Author:** ![121-gigawatts](https://forum.gbfans.com/user_avatar/forum.gbfans.com/121-gigawatts/32/186036_2.png) [@121-gigawatts](https://forum.gbfans.com/u/121-gigawatts)\
**Post date:** [June 11, 2010, 3:41pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/66 "2010-06-11T15:41:28Z")

</div>

> [@Indianapolis\_Ghostbusters](#):
>
> Are there any schematics for just running wires and LEDs? That would proly be easier than the PCB Boards in the wings.

I would think all those wires would somehow hinder the wing movement a bit. Anyone have any experience with that?

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [June 11, 2010, 4:38pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/67 "2010-06-11T16:38:19Z")

</div>

You need to use stranded instead of solid core wires. Though if you’re using a kit and not building it yourself in the first place you’re probably SOL on that count. :whatever:

---

<div class="post-metadata">

**Author:** ![jimbo7](https://forum.gbfans.com/user_avatar/forum.gbfans.com/jimbo7/32/12041_2.png) [@jimbo7](https://forum.gbfans.com/u/jimbo7)\
**Post date:** [June 11, 2010, 6:31pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/68 "2010-06-11T18:31:50Z")

</div>

> [@Indianapolis\_Ghostbusters](#):
>
> The actual wires have been breaking… Now I am having trouble getting the wing lights to fit in the wings and not hit the other electronics when they extend. And the ribbon wire that is on mine is different from the one in the picture, mine is more like the one on the front of the trap pedal. And very stiff.

Just seperate the ribbon. I had to heat up mine for a few seconds with a heat gun to soften the glue he used to hold the wires in place, then gently push them into a right angle. The glue will harden and they will stay flat. To seperate the ribbon, just GENTLY run an exacto along the joint or pull them apart. I do not suggest pulling since the wires are very soft and can snap. My PKE build hasn’t been too bad, but you just have to take your time. So far, I just have to mount the last servo and adjust my second wing to fit the board.

---

<div class="post-metadata">

**Author:** ![Indianapolis\_Ghostbu](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/8c91f0/32.png) [@Indianapolis\_Ghostbu](https://forum.gbfans.com/u/Indianapolis_Ghostbu)\
**Post date:** [June 11, 2010, 8:39pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/69 "2010-06-11T20:39:27Z")

</div>

Thanks for the info.

---

<div class="post-metadata">

**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\
**Post date:** [June 11, 2010, 9:34pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/70 "2010-06-11T21:34:33Z")

</div>

You guys need to brush up on wire layout. 🙂

I’m guessing the wires are breaking at the solder points to the arm.. Yes?

Copper has a cubic crystal structure and bending a copper wire “work hardens” it, which introduces defects known as dislocations into the structure (jagged crystal shapes). Basically, the more you bend anything copper, the more brittle it becomes. And that is happening to the end of the wires every time the arms move up and down.

Yeah thick wire, and bad layout.

They need to be tied together in a way that they are “blocked” together so they don’t bend at the solder points, and routed across to the opposite side of the PKE body to minimize the bending.

---

<div class="post-metadata">

**Author:** ![jimbo7](https://forum.gbfans.com/user_avatar/forum.gbfans.com/jimbo7/32/12041_2.png) [@jimbo7](https://forum.gbfans.com/u/jimbo7)\
**Post date:** [June 11, 2010, 11:37pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/71 "2010-06-11T23:37:28Z")

</div>

> [@CPU64](#):
>
> You guys need to brush up on wire layout. 🙂
> 
> I’m guessing the wires are breaking at the solder points to the arm.. Yes?
> 
> Copper has a cubic crystal structure and bending a copper wire “work hardens” it, which introduces defects known as dislocations into the structure (jagged crystal shapes). Basically, the more you bend anything copper, the more brittle it becomes. And that is happening to the end of the wires every time the arms move up and down.
> 
> Yeah thick wire, and bad layout.
> 
> They need to be tied together in a way that they are “blocked” together so they don’t bend at the solder points, and routed across to the opposite side of the PKE body to minimize the bending.

the hyperdyne boards have hot glue on the termination points to stop them from moving when the arms move. that way the solder points dont break. also, the wire gauge actually pretty thin, but the pics seem to make them look bigger than they actually are.

---

<div class="post-metadata">

**Author:** ![ChapterMasterTuShan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@ChapterMasterTuShan](https://forum.gbfans.com/u/ChapterMasterTuShan)\
**Post date:** [June 11, 2010, 11:49pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/72 "2010-06-11T23:49:33Z")

</div>

Does Hyperdyne supply twisted or solid wire? Honestly, I’d just drop a few gauges and forgo soldering in lieu of wire-wrapping.

---

<div class="post-metadata">

**Author:** ![jimbo7](https://forum.gbfans.com/user_avatar/forum.gbfans.com/jimbo7/32/12041_2.png) [@jimbo7](https://forum.gbfans.com/u/jimbo7)\
**Post date:** [June 11, 2010, 11:59pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/73 "2010-06-11T23:59:04Z")

</div>

I do not have it with me right now TJ, but im 99.99% sure its solid.

---

<div class="post-metadata">

**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\
**Post date:** [June 12, 2010, 5:14am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/74 "2010-06-12T05:14:11Z")

</div>

> [@Peaugh](#):
>
> ![image](http://www.gbfans.com/images/pb/Peaugh/DSCF2581.jpg)

This is what I was commenting on. The wires connected to the arm board. Those could break with use if left like that.

---

<div class="post-metadata">

**Author:** ![Indianapolis\_Ghostbu](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/8c91f0/32.png) [@Indianapolis\_Ghostbu](https://forum.gbfans.com/u/Indianapolis_Ghostbu)\
**Post date:** [June 15, 2010, 4:43pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/75 "2010-06-15T16:43:06Z")

</div>

Broke my second servo. I must just be stupid. Where the wires connect to the PKE Wing keep getting caught on the main board and puts the wing in a bind. If I can’t get it soon, I might pay one of you guys to put it together for me.

---

<div class="post-metadata">

**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\
**Post date:** [June 15, 2010, 7:30pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/76 "2010-06-15T19:30:39Z")

</div>

I’d be glad to put one together for you.

---

<div class="post-metadata">

**Author:** ![Indianapolis\_Ghostbu](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/8c91f0/32.png) [@Indianapolis\_Ghostbu](https://forum.gbfans.com/u/Indianapolis_Ghostbu)\
**Post date:** [June 15, 2010, 11:10pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/77 "2010-06-15T23:10:46Z")

</div>

> [@CPU64](#):
>
> I’d be glad to put one together for you.

How much would you charge?

---

<div class="post-metadata">

**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\
**Post date:** [June 16, 2010, 2:52am UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/78 "2010-06-16T02:52:01Z")

</div>

Nothing… I’m not supplying any parts other than a little solder.. I don’t really charge for my free time. :3

But I do have a tips jar. 🙂

And I can always use the build pictures for a tutorial to help others with their builds.

---

<div class="post-metadata">

**Author:** ![Indianapolis\_Ghostbu](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/8c91f0/32.png) [@Indianapolis\_Ghostbu](https://forum.gbfans.com/u/Indianapolis_Ghostbu)\
**Post date:** [June 16, 2010, 7:00pm UTC](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685/79 "2010-06-16T19:00:13Z")

</div>

I have most everything in the meter, I just can’t get the servos right. PM me so I can get your address and Paypal, I will pay you something for the work.

[Previous page](https://forum.gbfans.com/t/putting-a-hyperdyne-kit-into-a-guntahkela-pke-shell-tutorial/14685.md?page=3)
