# Question: Cyclotron lights to fast! Proton Wand Light Kit and Amplified Light and Sound Controller **URL:** \ **Category:** Tutorials & Guides\ **Created:** [July 18, 2026, 10:53am UTC](https://forum.gbfans.com/t/question-cyclotron-lights-to-fast-proton-wand-light-kit-and-amplified-light-and-sound-controller/219230 "2026-07-18T10:53:41Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![shelldor-1970-9oyaci](https://forum.gbfans.com/user_avatar/forum.gbfans.com/shelldor-1970-9oyaci/32/102610_2.png) [@shelldor-1970-9oyaci](https://forum.gbfans.com/u/shelldor-1970-9oyaci)\ **Post date:** [July 18, 2026, 10:53am UTC](https://forum.gbfans.com/t/question-cyclotron-lights-to-fast-proton-wand-light-kit-and-amplified-light-and-sound-controller/219230/1 "2026-07-18T10:53:42Z")
![Zusammen](https://discdn.gbfans.com/original/3X/c/4/c4f971438884a8b56c7adde6a9c1032ef5e48a77.jpeg) Hi fellow Ghostbusters, I’m 98% finished with my [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack). I’ve installed and tested all the electronics. You can see my DIP switch settings in the photos. I’m happy with it so far, but how do I make the four [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) LEDs light up more slowly? The lights illuminate in a clockwise sequence, but unfortunately, it’s too fast; I’d like them to light up more slowly. Is there any way to adjust this via the hardware? Thanks for your help, and best regards from Germany, Thomas ---
**Author:** ![spooky](https://forum.gbfans.com/user_avatar/forum.gbfans.com/spooky/32/187216_2.png) [@spooky](https://forum.gbfans.com/u/spooky)\ **Post date:** [July 18, 2026, 11:23am UTC](https://forum.gbfans.com/t/question-cyclotron-lights-to-fast-proton-wand-light-kit-and-amplified-light-and-sound-controller/219230/2 "2026-07-18T11:23:48Z")
I don’t know anything about this specific light kit, so I can only guess. The only other adjustment parts I see are the spots labeled ADJ0 and ADJ1. You should be able to use a screwdriver and turn each of those to the left and the right. ---
**Author:** ![shelldor-1970-9oyaci](https://forum.gbfans.com/user_avatar/forum.gbfans.com/shelldor-1970-9oyaci/32/102610_2.png) [@shelldor-1970-9oyaci](https://forum.gbfans.com/u/shelldor-1970-9oyaci)\ **Post date:** [July 18, 2026, 12:45pm UTC](https://forum.gbfans.com/t/question-cyclotron-lights-to-fast-proton-wand-light-kit-and-amplified-light-and-sound-controller/219230/3 "2026-07-18T12:45:04Z")
Ok spooky i give them later a try and give here a short feedback… Thanks Man! ---
**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/188008_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\ **Post date:** [July 18, 2026, 10:49pm UTC](https://forum.gbfans.com/t/question-cyclotron-lights-to-fast-proton-wand-light-kit-and-amplified-light-and-sound-controller/219230/4 "2026-07-18T22:49:59Z")
The adjustment potentiometers only adjust the powercell. This is the dip switch table: | Pack Description | Pack Sel0 | Pack Sel1 | Heating | Wand Lights Description | 1 | 2 | 3 | | --- | --- | --- | --- | --- | --- | --- | --- | | 4x Red Snap | OFF | OFF | OFF | Movie Wand | OFF | OFF | X | | 4x Red Fade | ON | OFF | OFF | Movie Wand | OFF | OFF | X | | [Afterlife](https://www.gbfans.com/shop/ghostbusters-afterlife) Red | ON | ON | OFF | Movie Wand | OFF | OFF | X | | 4x Red Snap | OFF | OFF | ON | Movie Wand w/Heating | OFF | ON | ON | | 4x Red Fade | ON | OFF | ON | Movie Wand w/Heating | OFF | ON | ON | | Afterlife Red | ON | ON | ON | Movie Wand w/Heating | OFF | ON | ON | | 4x TVG | OFF | ON | ON | TVG Wands | ON | ON | X | It appears you have it set to Afterlife mode. If you have the 4 individual [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) LEDs and wand it to fade I believe 1 should be on and 2 should be off. You of course can change all the timings by modifying the firmware and uploading it to your board over USB: > **[GitHub - gbfans/pack-light-and-sound-firmware: Firmware for the GBFans.com Pack Light and Sound...](https://github.com/gbfans/pack-light-and-sound-firmware/)** > > Firmware for the GBFans.com Pack Light and Sound Electronic Controller. ---
**Author:** ![shelldor-1970-9oyaci](https://forum.gbfans.com/user_avatar/forum.gbfans.com/shelldor-1970-9oyaci/32/102610_2.png) [@shelldor-1970-9oyaci](https://forum.gbfans.com/u/shelldor-1970-9oyaci)\ **Post date:** [July 20, 2026, 5:50pm UTC](https://forum.gbfans.com/t/question-cyclotron-lights-to-fast-proton-wand-light-kit-and-amplified-light-and-sound-controller/219230/5 "2026-07-20T17:50:56Z")
Thanks for your help aj-quick. Let’s see if I can make some headway with my question and get it to work.