First of all, I got both my light and wand light kits. I am amazed with the quality!
I do have a few questions. First, I have to figure out how to fit the wand kit inside the wand box… I might need to remove some big chunks of epoxy, and probably cut some pvc tubes. If any of you has some pics of the wand guts with Exoray’s board, would you be so kind and post some?)
Second question:
Both kits included a battery holder. Do I need to use both holders (one for the wand kit and another for the pack kit) or can I supply enough power to both kits with just one battery holder?
I haven’t got the chance to check everything, because I have to get running out the door. In case I need to use both battery holders, do I need to get extra cable to run it from the wand kit to the battery holder that will be on the pack, or is a long enough cable included on the kit? If so, what type of cable do you recommend? I have to make a trip to Radio Shack later, and would like to get some if needed to.
yeah, the wand kits make things very tight (I got VERY lucky both times I used the wand kit… next time definitely getting the “in pack” model).
You do need both battery holders, however, the one for the wand has a lone enough wire to go from the kit to the inside of the pack (more than needed, really). You could splice the wires for each kit together to reduce the weight, but you’d only eat up the battery life faster, but if you’re concerned about weight, having only 6 C Cell batteries over 12 C cells might make all the difference
I have an old hyperdine light kit for the pack and instead of having that many batteries, I make a “battery pack” consisting of 4 9V batteries in parallel with a disconnect plug..
For the gun, since I don’t have a kit, I use a regular RC 7.2 NiCd pack in the back about the same place the movie packs had their batteries.
I made a copy of the battery holder as well.
Considering the weight of my pack, I can’t have 12 D cells in there..
I’m still thinking how to fit not only the board, but how to rig the cables from the left box (intensify) to the wand. Need to look for a place to drill and conceal the cables. I hope I don’t have to take everything apart and start practically from scratch. That wouldn’t be much fun. Hehehe.
I did two of the them and the second one was much easier since I underestimated the size in the box (yes they are amazing) Use BOTH battery packs. If you are concerned with weight, you ca snap off the lead to the battery holder and subsitute a 9v battery (depends on how much you use it) we have been doing a fan film and using 9v for wand and one on the pack and the lights are still very bright. Gouge the living ■■■■ out of the wand box since you may want to put a reinforcing screw into the gun track at the base (I did) assuming that you have the resin gun track. Hope that helps!
just make sure that you leave about at leas an 1/8" on the sides. Chop the corners. I grinded them down with a drum bit on my Dremel. Wear a mask, and that dust gets EVERYWHERE. My 12" custom GB’s look like they have dandruff LOL
I run my Exoray kits off two 9 volt batteries as well. When I’m walking around a con I usually only have the pack lights on anyway. The gun lights I turn on for pictures and stuff. I’m not sure exactly how long the pack lights run on just the 9 volt, but a fresh one definitely gives me a good many hours of con traveling with blinky lights going.
Would anyone have any ideas on how to hook up this sound kit: viewtopic.php?f=2&t=14107
To an Exoray gun & pack light kit? So that the power on switch/sound (DPDT) turns on the pack lights and bargraph and led. And so that when the fire switch/sound (momentary DPDT) is pushed the lights and bargraph function in doing their effect. Anyone have anyideas or suggestions?
I will be making a tutorial then on how to set up this sound set up. And Exoray’s a nice guy, you could probably ask him to install DPDT micro toggle switches and momentary push button for you when you order; it doesn’t hurt to ask.
But yeah, I’ll make a tutorial then. It’s not very hard at all.
I’m just wondering if they are compatible? I’ve been looking at Exoray’s light kits and both the pack and gun kit have their own power source (this might be b/c ppl buy them separately). But he also has some functions on the gun kit such as the barrel light and bar graph and the blinking led and that is what makes me ask questions. I think I will try and contact Exoray and I’ll try to work something out. I already purchased the switches so maybe I could just have them ship to him so he could include them in my kit. Well I’ll let you guys know what happens in the end and thanks mburkit for you input.
It’s no problem. I my pack’s sound should be done by this weekend or early next week once I get my amp in. Once it’s all together, I will make a tutorial, which I’ll have up on this site within a week then. I guess I have to make the tutorial to cover different people’s set ups in their packs (i.e. how many and which kind of power sources they are using). I promise once I am done installing everything, I’ll let everyone know how to do it.
I have an Arduino/Waveshield sound thingie that I’d like to set up, and I have NO IDEA how to rig it using Exoray’s light kit. I’d like to share the same switches, at least some of them. Perhaps power on with humming and power off.
Any ideas?
Also, I need to rewire the INTENSIFY button. I broke mine and wanted to use a new momentary button, but there are three wires: red, white and another one, and I have no idea how to set it up since the switch has only 2 prongs.
In the tutorial I will be making, I will show you how to set up the sound system Rob from Replica Props, pchrisbosh1 and I have been working on. I do not want to step on the toes of other people that supply light kits and sound kits that go with those light kits. So my tutorial will not read as (for example): “if you have a such and such's light kit, do this . . .”. That’s not what I’m planning on doing. I’m going to explain how to wire up DPDT switches and you will have to modify the switches for your existing light kits AT YOUR OWN RISK.
Once again, I’ll have a tutorial set up in the near future on how to wire up what we’ve been working on.
Sorry for high jacking this thread. I just wanted to make clear what I will be putting out.
You don’t have to use the C cell battieries. I’ve got both my kits (and the sound kit when Exoray releases it) running from a 4300Mah 12 V rechargeable battery pack.
The recharge port is located near the bottom of the motherboard. I simply plug in the charger, no having to open the pack to change batteries.:). I also have a master on/off switch for both light kits.
Here’s a diagram of my setup. Circuit 3 will be the sound kit eventually.