# RGB - XGB Inbetween PKE

**URL:** <https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374>\
**Category:** PKE Meters\
**Created:** [June 13, 2008, 8:02pm UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374 "2008-06-13T20:02:49Z")\
**Posts on this page:** 19\
**Page:** 1

<div class="post-metadata">

**Author:** ![theMaestro](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/eada6e/32.png) [@theMaestro](https://forum.gbfans.com/u/theMaestro)\
**Post date:** [June 13, 2008, 8:02pm UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/1 "2008-06-13T20:02:49Z")

</div>

One thing i really felt lacking from last years halloween cossie was a PKE. What with having to save as much money as possible to emigrate, like my pack and such this had to be created on the cheap. Ergo, it was built from a combination of mounting board, MDF, and Dowel for the main body, plastic offcuts for the screen, and cheap maplins electronics kits. Overall this represented about 4 / 5 evenings work.

The net of the main body, cut from 2mm mounting board from a craft shop. I opted for mounting board a) because it’s comparitively cheap, b) easy to work with, c) surprisingly durable when built around an MDF frame. A lot of my pack parts were crafted in this technique to keep weight and cost down - and also made each part cheapy and easily repaceable, as i was planned to wear it to some rowdy pubs and clubs. Surprisingly the pack returned inrtact every time, despite taking some heavy knocks (worst when i actually fell over somewhat drunk!) But i digress.

MDF and thick dowel framing built and added. This gives the body it’s ridgidity and prevents the mounting board from having to bear any significant weight.

Body sealed up, mounts for panel buttons added (MDF block), [side knobs](https://www.gbfans.com/shop/ecto-goggle-side-knobs) added (attacked an OHP from a local University…), and sensor mounts added. Starting to take shape.

View inside of above. Back hatch to be sealed using nuts and bolts. Bolts wedged and glued into appropriately sized holes drilled into the MDF framing.

The sensor prongs. Simple dowel with hole drilled down the centre (tougher chellenge that I’d thought!). LED’s with integrated blinking IC’s inserted into ends, wires down centre hollow, and [cliplite](https://www.gbfans.com/shop/led-cliplites) covers on the end. In a later revision i but some metal wachers at the top for aesthetics.

base black coat added, and panel mount push to make switched positioned for self motivational eye candy - helps to keep me striving for the finish.

Drab olive coat added. not a fan of the solid black look - this colour break it up a little and makes the overall outfit fore visually appealing I feel. Also tracing paper with graph drawn on inserted for the screen graphics. This will later be sandwiched between two acrylic pieces - one green top layer, and one transparent bottom. Bottom Acrylic has 8 small holes drilled from trace graph LEDS. Entire screen will be backlit by two ultra bright LED’s.

Internal electronic wiring begins to go in place. L:argely for reference at this stage.

Electronics test of illuminated panel buttons and screen backlight. the red button is locking, and the blue is simple push to make. red will control power on / off, blue will control trace graph program.

same as above, but wanted to test brightness. Pleased with outcome so far at this stage. About 3 evenings into whole construction by this point.

Main stage electronics assembled. This is actually a simple running LED kit from maplins - cost £6. i also used this to do the [Cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) lights in my pack, and [bar graph](https://www.gbfans.com/wiki/equipment/proton-pack/bar-graph) in my gun. In this usage the POT will be used to control the speed of the trace graph.

Final assembly of parts - knob added to adjust POT (graph speed). Side knobs are not fixed so can be twiddled for added effect but do nothing. I learned fast from my pack / gun that the first thing people do is try to turn knobs, which when static swiftly break. ultimately this hobby is very ‘tactile’ making people want to tough the costume as well as admire it. twiddlable knobs results in less repairs i think!

Same as above but different angle. Little black push button on side is the reset for the internal electronics. Also adds another visual element.

darkened shot. The trace graph is just about visible here - i apologise for the blurriness but photography isn’t my niche!

Overall i’m pelased with how it came out - i view it as an inbetween iteration of the PKE of RGB to EGB. not screen accurate in any way or form, but looks damned cool and works as well.

Well, it doesn’t find ghosts but you get the picture. 😉 Comments and (contructive) criticisms welcome - I’m relatively new at this prop building lark so any guidance is always appreciated.

Cj

AKA - Maestro

---

<div class="post-metadata">

**Author:** ![wkbarkov](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/w/eb8c5e/32.png) [@wkbarkov](https://forum.gbfans.com/u/wkbarkov)\
**Post date:** [June 13, 2008, 8:24pm UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/2 "2008-06-13T20:24:53Z")

</div>

That looks really good. I’ve been attempting to build props for about 5 years now and have yet to finish anything other than my original flightsuit. I have a trap, a RGB conversion trap, and a [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) all in the works ranging anywhere from 25-80% complete. So you’re doing better than me.

---

<div class="post-metadata">

**Author:** ![theMaestro](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/eada6e/32.png) [@theMaestro](https://forum.gbfans.com/u/theMaestro)\
**Post date:** [June 13, 2008, 8:56pm UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/3 "2008-06-13T20:56:59Z")

</div>

Hehe, thanks, but i definitely know what you mean. When i started my pack i hit a point of sheer infuriation where i just didnt want to continue. If it wan’t for my other half giving me a good kick up the ass and insisting that i didn’t give up on it, it liekly would never have been finished. She knew that a proton back was a childhood dream thing from many moons back, bless her.

Something i found important as a motivational tool all the way through though, was to keep looking at what i had managed to do, and use that o get excited about doing more. 🙂

---

<div class="post-metadata">

**Author:** ![goosebuster](https://forum.gbfans.com/user_avatar/forum.gbfans.com/goosebuster/32/106449_2.png) [@goosebuster](https://forum.gbfans.com/u/goosebuster)\
**Post date:** [June 14, 2008, 4:25pm UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/4 "2008-06-14T16:25:07Z")

</div>

That is looking pretty sweet right there.

I’ve been working on my iona for over a year now. Its just trying to work out how to get some lights into the wings.

Might have to pop into maplins and get one of those kits 🆒

Great work. :crunch:

---

<div class="post-metadata">

**Author:** ![Silverskyes402](https://forum.gbfans.com/user_avatar/forum.gbfans.com/silverskyes402/32/5977_2.png) [@Silverskyes402](https://forum.gbfans.com/u/Silverskyes402)\
**Post date:** [June 16, 2008, 4:47am UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/5 "2008-06-16T04:47:08Z")

</div>

That looks incredible, I’m working on a movie version PKE right now, but want to start a XGB PKE, you’ve given me the inspiration to get the project going!!!

---

<div class="post-metadata">

**Author:** ![LordVego](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/b2d939/32.png) [@LordVego](https://forum.gbfans.com/u/LordVego)\
**Post date:** [June 16, 2008, 1:53pm UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/6 "2008-06-16T13:53:47Z")

</div>

That’s a solid [PKE meter](https://www.gbfans.com/shop/mattel-pke-meter) right there, and it didn’t seem very hard at all. That mounting board is a good thing to use, I’m assuming? I like what you did, so I’m thinking about trying it.

---

<div class="post-metadata">

**Author:** ![theMaestro](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/eada6e/32.png) [@theMaestro](https://forum.gbfans.com/u/theMaestro)\
**Post date:** [June 16, 2008, 4:44pm UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/7 "2008-06-16T16:44:36Z")

</div>

Thanks for the positive comments, and glad it was of some inspiration.

The mounting board I’ve found is surprisingly versatile. I use 3mm thick board, which when used with some simple MDF framing makes for quick and easy modelling. Just plan out a net, draw it onto the board, cut, and assemble. 🙂 Sufficiently strong, and easy to paint. The only down obviously are the folds, but I’m sure with some time and patience one could apply some filler of some sort to those, smooth them off and have a far nicer finish.

i didn’t take progress pics of my pack - but basically all the major parts bar the cycloton and spacer were made this way. I did this originally for speed as i have to make the pack inside a few weeks, but also realised it would be useful for replacing any damaged parts quickly and cheaply. I.e. if the [ion arm](https://www.gbfans.com/shop/aluminum-welded-ion-arm) took and heavy smack and busted it wouldn’t be a huge issue to assemble a new one. As this was a pack i palnned wearing to parties and such, cheap and repairable were big consideration.

Ergo, i took this tack when making both this PKE and the trap. 😃

The mounting board can be picked up in any craft store, for a few pounds for a large sheet.

---

<div class="post-metadata">

**Author:** ![sietsema02](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/94ad74/32.png) [@sietsema02](https://forum.gbfans.com/u/sietsema02)\
**Post date:** [June 20, 2008, 1:22am UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/8 "2008-06-20T01:22:21Z")

</div>

Looks awsome I’m hoping to start my P.K.E. soon what dimentions did you use?

---

<div class="post-metadata">

**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/188008_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\
**Post date:** [June 20, 2008, 1:23am UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/9 "2008-06-20T01:23:33Z")

</div>

That thing looks awesome!!

---

<div class="post-metadata">

**Author:** ![LordVego](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/b2d939/32.png) [@LordVego](https://forum.gbfans.com/u/LordVego)\
**Post date:** [June 20, 2008, 5:21pm UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/10 "2008-06-20T17:21:05Z")

</div>

> [@theMaestro](#):
>
> Thanks for the positive comments, and glad it was of some inspiration.
> 
> The mounting board I’ve found is surprisingly versatile. I use 3mm thick board, which when used with some simple MDF framing makes for quick and easy modelling. Just plan out a net, draw it onto the board, cut, and assemble. 🙂 Sufficiently strong, and easy to paint. The only down obviously are the folds, but I’m sure with some time and patience one could apply some filler of some sort to those, smooth them off and have a far nicer finish.
> 
> i didn’t take progress pics of my pack - but basically all the major parts bar the cycloton and spacer were made this way. I did this originally for speed as i have to make the pack inside a few weeks, but also realised it would be useful for replacing any damaged parts quickly and cheaply. I.e. if the ion arm took and heavy smack and busted it wouldn’t be a huge issue to assemble a new one. As this was a pack i palnned wearing to parties and such, cheap and repairable were big consideration.
> 
> Ergo, i took this tack when making both this PKE and the trap. 😃
> 
> The mounting board can be picked up in any craft store, for a few pounds for a large sheet.

I’m definitely considering this or foam for a quick lightweight pack as a temp while i muster up the courage to finish my wood pack

---

<div class="post-metadata">

**Author:** ![Ghost\_Ninja](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/9fc29f/32.png) [@Ghost\_Ninja](https://forum.gbfans.com/u/Ghost_Ninja)\
**Post date:** [June 22, 2008, 10:16pm UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/11 "2008-06-22T22:16:17Z")

</div>

I like this PKE. :sigh:

---

<div class="post-metadata">

**Author:** ![Jeff\_Haas](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/a88e4f/32.png) [@Jeff\_Haas](https://forum.gbfans.com/u/Jeff_Haas)\
**Post date:** [June 26, 2008, 7:07am UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/12 "2008-06-26T07:07:55Z")

</div>

Maestro, what would be REALLY useful would be the diagram you used to cut out the pieces of mounting board. With that, I think a lot of us could easily make our own.

I found the electronics kits…for those of you in the US, it’s a [Velleman MK107](http://www.vellemanusa.com/us/enu/product/view/?id=350682).

Also, looks like the two blinky lights on the ends of the antenna are the [Velleman MK102](http://www.vellemanusa.com/us/enu/product/view/?id=350677).

They’re inexpensive and available in the US from: [Design Notes.com](http://www.designnotes.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=mik)

---

<div class="post-metadata">

**Author:** ![howlingwind13](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/h/278dde/32.png) [@howlingwind13](https://forum.gbfans.com/u/howlingwind13)\
**Post date:** [July 2, 2008, 3:00am UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/13 "2008-07-02T03:00:23Z")

</div>

Very nice.

mike

---

<div class="post-metadata">

**Author:** ![theMaestro](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/eada6e/32.png) [@theMaestro](https://forum.gbfans.com/u/theMaestro)\
**Post date:** [July 2, 2008, 8:42am UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/14 "2008-07-02T08:42:20Z")

</div>

Thanks again for all the comments guys. 🙂

> [@Jeff Haas](#):
>
> Maestro, what would be REALLY useful would be the diagram you used to cut out the pieces of mounting board. With that, I think a lot of us could easily make our own.

I could certainly try and do that when I have a moment, have been diving in and putting together a new wand recently which has taken up a lot of my spare time. I didn’t actually use any diagrams per se, but I can mock up the net in photoshop with some measurements easy enough.

> [@Jeff Haas](#):
>
> I found the electronics kits…for those of you in the US, it’s a [Velleman MK107](http://www.vellemanusa.com/us/enu/product/view/?id=350682).
> 
> Also, looks like the two blinky lights on the ends of the antenna are the [Velleman MK102](http://www.vellemanusa.com/us/enu/product/view/?id=350677).

Spot on! I find these kits an ideal and inexpensive solution to most of my GB needs. Thanks for the heads up on where to get them in the states, could be useful when i move voer tehre next year!

---

<div class="post-metadata">

**Author:** ![Jeff\_Haas](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/a88e4f/32.png) [@Jeff\_Haas](https://forum.gbfans.com/u/Jeff_Haas)\
**Post date:** [July 25, 2008, 5:52am UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/15 "2008-07-25T05:52:34Z")

</div>

Just got back into town and found your reply…can I give you a nudge to get moving on the template? It’s almost August already! Time to start getting ready for Halloween!

---

<div class="post-metadata">

**Author:** ![Jeff\_Haas](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/a88e4f/32.png) [@Jeff\_Haas](https://forum.gbfans.com/u/Jeff_Haas)\
**Post date:** [July 26, 2008, 7:23am UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/16 "2008-07-26T07:23:43Z")

</div>

One more question…what kind of buttons are you using for the red and blue on the front?

---

<div class="post-metadata">

**Author:** ![Indianapolis\_Ghostbu](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/8c91f0/32.png) [@Indianapolis\_Ghostbu](https://forum.gbfans.com/u/Indianapolis_Ghostbu)\
**Post date:** [August 5, 2008, 12:32am UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/17 "2008-08-05T00:32:02Z")

</div>

You have inspired me to do an RGB PKE. Through my research I find that not only is it more cost effective to make one this way, but you will also eliminate all the headaches from putting together a movie accurate one. Which if that is what Master Replicas is going to be producing (Highly Likely) then I will just buy one of those. But for now I to would like to see some blueprints on here so we can all follow in your foot steps. Great work!!

---

<div class="post-metadata">

**Author:** ![oldhope001](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/o/a698b9/32.png) [@oldhope001](https://forum.gbfans.com/u/oldhope001)\
**Post date:** [September 9, 2008, 8:36pm UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/18 "2008-09-09T20:36:15Z")

</div>

That is so cool. I always preferred the Extreme one. Now I have got to try and make one. 🆒

---

<div class="post-metadata">

**Author:** ![Nerdy\_NotionZ](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/e8c25b/32.png) [@Nerdy\_NotionZ](https://forum.gbfans.com/u/Nerdy_NotionZ)\
**Post date:** [November 11, 2008, 11:03pm UTC](https://forum.gbfans.com/t/rgb-xgb-inbetween-pke/28374/19 "2008-11-11T23:03:47Z")

</div>

I am wanting to make a EGB PKE for my photoshot this weekend. Any way you could draw up a temp with the sizes you used?
