# Scaled Neutrona Wand Build for Fiancé's Pack

**URL:** <https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375>\
**Category:** Proton Packs\
**Created:** [July 20, 2025, 9:00pm UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375 "2025-07-20T21:00:07Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![ebobhazard84](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ebobhazard84/32/181769_2.png) [@ebobhazard84](https://forum.gbfans.com/u/ebobhazard84)\
**Post date:** [July 20, 2025, 9:00pm UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375/1 "2025-07-20T21:00:07Z")

</div>

Hello to everyone on the board. I wanted to create this build thread for a little project I started today. I’m a huge Ghostbusters enthusiast and I have suckered my fiancé into cosplaying with me. She’s a tiny human, about 5’2", so a full-size [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) is proportionally wrong for her, but the Spirit Halloween pack is pretty perfect.

I first modified her Spirit pack a few years ago but the wand always bothered me.

 ![image](https://discdn.gbfans.com/original/3X/6/5/65aaaff424d1e6c0f4e926bd38194c7adef960ae.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/2/3/236320278d8258f7dd862721168c8f43204ace81.jpeg)

After kicking around the idea of starting a new pack for her then deciding to just mod her current pack more, I knew I HAD to change out the wand. A good buddy of mine had an extra 3D printed scaled wand kit and donated it to me, warning me it was pretty rough and needed a lot of clean up.

So, on this sunny Sunday, I decided to start this project. So here we go! I started by Bondoing some of the parts then did a little sanding.

 ![image](https://discdn.gbfans.com/original/3X/4/a/4a27b2d08e951a791f6abfb2107099b31fbb6943.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/a/d/ad4e381cfcb2a972893605bebb36daea27f765b3.jpeg)

I had also been wanting to add a rotating grip, but the kit wasn’t designed to include this feature. Instead, it had that nub the aluminum tube was **supposed** to fit over, except it didn’t fit at all, so let’s start cutting it up!

 ![image](https://discdn.gbfans.com/original/3X/8/1/81f00eb9c4450dbf5c90447a924cd36191c0ddf9.jpeg)

That worked out better than expected…

 ![image](https://discdn.gbfans.com/original/3X/8/0/80cb163ae40c8770a377f826a56dfa23bf7de7c1.jpeg)

I had been planning this for a couple weeks, so I found a PVC tube that would fit inside the aluminum tube. It’s long enough that it will bump up against the back of the inside of the wand. I drilled out the front to support it, but will mechanically connect it along the back side and hide it behind the fuse box and [rear cylinder](https://www.gbfans.com/wiki/equipment/proton-pack/rear-cylinder).

Then, I wanted it to have the short aluminum ring separate from the main tube, so I cut it by hand and and drilled out some holes for the hex screws.

 ![image](https://discdn.gbfans.com/original/3X/0/b/0b17a092e5a5ecc30d48903c22e29423f034e8b5.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/b/4/b4a86bc5347d029c2e8bfd2c8ae8da59316b682b.jpeg)

I also drilled out holes for [hat lights](https://www.gbfans.com/wiki/equipment/proton-pack/hat-lights) and an [arcolectric](https://www.gbfans.com/wiki/equipment/proton-pack/arcolectric) lamp. All of are full-size, but I think they scale well enough with this wand body

 ![image](https://discdn.gbfans.com/original/3X/2/1/21e16c3f86b3dfa98342e92596ff72e95cb60d67.jpeg)

And finally, I have the rear aluminum tube getting epoxied in place.

 ![image](https://discdn.gbfans.com/original/3X/d/4/d44593100af26ddd7e5b5aaddae0a0c9cd5f7022.jpeg)

I have a Frankengeek electronics kit to install still and I’m letting the epoxies cure for 24 hours. I may try to do some painting tomorrow if it isn’t too humid. I also grabbed Moby Sign Company’s Hasbro kids wand labels that appear to be the perfect size for this bad boy.

---

<div class="post-metadata">

**Author:** ![edspengler](https://forum.gbfans.com/user_avatar/forum.gbfans.com/edspengler/32/188587_2.png) [@edspengler](https://forum.gbfans.com/u/edspengler)\
**Post date:** [July 20, 2025, 10:33pm UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375/2 "2025-07-20T22:33:17Z")

</div>

This is looking great and can’t wait to see it complete! Love to see how you’re taking it up a notch by making the rotating grip. Glad this kit found a loving home!

---

<div class="post-metadata">

**Author:** ![ebobhazard84](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ebobhazard84/32/181769_2.png) [@ebobhazard84](https://forum.gbfans.com/u/ebobhazard84)\
**Post date:** [July 20, 2025, 11:32pm UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375/3 "2025-07-20T23:32:16Z")

</div>

I decided to start doing some painting… updates should be incoming. I’d love to throw some labels on tonight…

---

<div class="post-metadata">

**Author:** ![ebobhazard84](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ebobhazard84/32/181769_2.png) [@ebobhazard84](https://forum.gbfans.com/u/ebobhazard84)\
**Post date:** [July 21, 2025, 2:53pm UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375/4 "2025-07-21T14:53:50Z")

</div>

I did a little more work. I’m going to try to get the electronics in there today and paint the grips.

 ![image](https://discdn.gbfans.com/original/3X/1/f/1f402897baf99c38467757fa3ac5c419d99e8769.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/9/d/9df58866a02de54025403aca432bf38a95c86a95.jpeg)

My plan for the grips is to paint them orange then clear coat them, then do a spray of black on top with the hope that over time, the black will wear off any naturally weather to the orange undercoat, replicating how the packs look today.

---

<div class="post-metadata">

**Author:** ![ebobhazard84](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ebobhazard84/32/181769_2.png) [@ebobhazard84](https://forum.gbfans.com/u/ebobhazard84)\
**Post date:** [July 22, 2025, 12:32am UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375/5 "2025-07-22T00:32:33Z")

</div>

So, I had to pump the breaks a little bit but I did get to paint the grips the first coat.

 ![image](https://discdn.gbfans.com/original/3X/a/2/a2a0681224cb1a38a65bf4219fe6f64a78ee5df2.jpeg)

My plan is to clear coat them then paint them in satin black but not coat the black, that way, they wear away to the orange.

I also picked up some brass washers and replaced the ones on the front grip ring.

 ![image](https://discdn.gbfans.com/original/3X/b/7/b77a6ec675ef711ff6348a2ec7557f3fe10ef642.jpeg)

Little stuff like that makes me so very happy. I need to pull apart the old wand so I can liberate the toggle switches then I can worry about the electronics.

---

<div class="post-metadata">

**Author:** ![ebobhazard84](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ebobhazard84/32/181769_2.png) [@ebobhazard84](https://forum.gbfans.com/u/ebobhazard84)\
**Post date:** [July 23, 2025, 1:43am UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375/6 "2025-07-23T01:43:40Z")

</div>

Ok, crusin’ along on my “little” wand project. Last night, I ripped out the electronics kit from the existing Spirit wand. The pack is running a Frankengeek scaled kit, so I got his 80-90% wand kit but I needed to two toggles from the pack kit. That was a whole process and let’s just say I will never be using that old Spirit wand again.

As for the new wand, I got the wire harness inside and mounted the two toggles inside the gun body. I also replaced the loom with correctly scaled 3/4" OD loom. I drilled a small hole into the rear aluminum tube and because I’m insane, I used the screen accurate connection method with two vintage Panduit 6" zip ties threaded through each other and holding the loom in place. I also glued in place a reflective cup for the vent light, the milky [hat lights](https://www.gbfans.com/wiki/equipment/proton-pack/hat-lights), and the [arcolectric](https://www.gbfans.com/wiki/equipment/proton-pack/arcolectric) lamp.

 ![image](https://discdn.gbfans.com/original/3X/7/8/781f30611beb97a7f44a060932b72f0c4fa46efe.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/a/c/ac8f11790a01b044f9d88a56ac72e382aed4f169.jpeg)

---

<div class="post-metadata">

**Author:** ![edspengler](https://forum.gbfans.com/user_avatar/forum.gbfans.com/edspengler/32/188587_2.png) [@edspengler](https://forum.gbfans.com/u/edspengler)\
**Post date:** [July 23, 2025, 12:20pm UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375/7 "2025-07-23T12:20:39Z")

</div>

Now order some Chinese food and have it out on the table with the yellow multimeter while you eat.

---

<div class="post-metadata">

**Author:** ![ebobhazard84](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ebobhazard84/32/181769_2.png) [@ebobhazard84](https://forum.gbfans.com/u/ebobhazard84)\
**Post date:** [July 23, 2025, 7:24pm UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375/8 "2025-07-23T19:24:04Z")

</div>

And a can of Tab on the side.

---

<div class="post-metadata">

**Author:** ![ebobhazard84](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ebobhazard84/32/181769_2.png) [@ebobhazard84](https://forum.gbfans.com/u/ebobhazard84)\
**Post date:** [July 24, 2025, 3:58am UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375/9 "2025-07-24T03:58:58Z")

</div>

Tonight’s progress.

 ![image](https://discdn.gbfans.com/original/3X/9/a/9a2928eb2a4daa4a93597257ea6c6a5ba59e82ab.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/d/1/d150c52b93dfde9fc8db5674cfc6c4e8a4541842.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/3/b/3b5636bad88c9c21c8ce820e071264c710a9c883.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/4/6/469879e68e6ead15fe9a8405b1abd9d6299a0cce.jpeg)

---

<div class="post-metadata">

**Author:** ![ebobhazard84](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ebobhazard84/32/181769_2.png) [@ebobhazard84](https://forum.gbfans.com/u/ebobhazard84)\
**Post date:** [July 25, 2025, 1:53am UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375/10 "2025-07-25T01:53:51Z")

</div>

Did a fitting of parts tonight. The only major piece missing is the [trigger box](https://www.gbfans.com/wiki/equipment/proton-pack/trigger-box). I had a little fail last night as a result of dull drill bits, so my goal this weekend is to get that fixed. I need to do some finishing work on the [gun track](https://www.gbfans.com/wiki/equipment/proton-pack/gun-track) but this gives a good idea of what it’ll look like.

 ![image](https://discdn.gbfans.com/original/3X/c/0/c0e1f138015c65e0a4ebef26d5e4ea6d077dd8bb.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/5/c/5c5950e65a10a7727a14fd00e5b43c8061080a94.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/1/0/1039248d59c06ab1b81fa40ec7fd52ada897317e.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/9/2/92390360c10bda0a1e32e869ce1f61b6b60e1207.jpeg)

---

<div class="post-metadata">

**Author:** ![ebobhazard84](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ebobhazard84/32/181769_2.png) [@ebobhazard84](https://forum.gbfans.com/u/ebobhazard84)\
**Post date:** [July 30, 2025, 1:19pm UTC](https://forum.gbfans.com/t/scaled-neutrona-wand-build-for-fiances-pack/25375/11 "2025-07-30T13:19:44Z")

</div>

So, the wand is mostly done and I think it came together pretty well.

 ![image](https://discdn.gbfans.com/original/3X/c/1/c1810dbc715dfa8bb971010559256f5010d75d0f.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/c/6/c6bd54c9fec005e9118632808ab4978360d025aa.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/c/7/c76df5b71bd05b8866eab2ce47a055eb67659c8e.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/7/0/708c8e5a0241c7475c8abdd6f3d50bb044afdf4a.jpeg)

I think it looks pretty good for a Spirit Halloween pack.
