# Show me your tips!

**URL:** <https://forum.gbfans.com/t/show-me-your-tips/32715>\
**Category:** Proton Packs\
**Created:** [March 17, 2015, 4:11pm UTC](https://forum.gbfans.com/t/show-me-your-tips/32715 "2015-03-17T16:11:37Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Karma](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/bcef8e/32.png) [@Karma](https://forum.gbfans.com/u/Karma)\
**Post date:** [March 17, 2015, 4:11pm UTC](https://forum.gbfans.com/t/show-me-your-tips/32715/1 "2015-03-17T16:11:37Z")

</div>

…your thrower tips, that is. If you have a photo showing your thrower end, I would appreciate it.

Looking for some help with my gun build. I have a TC kit and a FreekyGeeky clear tube, trying to figure out the best way to put them together…I think I am going to need to hollow out the TC tube end. Just want to make sure I’m not missing something there… and how much of the clear tube should be showing? I don’t want to short myself. 🙂 thanks in advance.

-Karma

---

<div class="post-metadata">

**Author:** ![SSRSin2010](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/43a26b/32.png) [@SSRSin2010](https://forum.gbfans.com/u/SSRSin2010)\
**Post date:** [March 20, 2015, 10:42pm UTC](https://forum.gbfans.com/t/show-me-your-tips/32715/2 "2015-03-20T22:42:22Z")

</div>

i went with a “sniper tip” its a solid rod of acrylic its longer then most.

---

<div class="post-metadata">

**Author:** ![bishopdonmiguel](https://forum.gbfans.com/user_avatar/forum.gbfans.com/bishopdonmiguel/32/187401_2.png) [@bishopdonmiguel](https://forum.gbfans.com/u/bishopdonmiguel)\
**Post date:** [March 22, 2015, 3:58pm UTC](https://forum.gbfans.com/t/show-me-your-tips/32715/3 "2015-03-22T15:58:59Z")

</div>

I have the same parts. FreekyGeeky sells a $5 tube ring that fits on the back end. Keeps the tube nice & straight in the thrower and also provides a nice mounting point for the bright LEDs if you go that route. I didn’t glue mine in and I can manually adjust the extension… but I just leave it fully extended.

---

<div class="post-metadata">

**Author:** ![Karma](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/bcef8e/32.png) [@Karma](https://forum.gbfans.com/u/Karma)\
**Post date:** [March 23, 2015, 4:39pm UTC](https://forum.gbfans.com/t/show-me-your-tips/32715/4 "2015-03-23T16:39:29Z")

</div>

Thanks, your throwers look great!