# Slime Blower (from Ghostbusters II) project COMPLETED!!!

**URL:** <https://forum.gbfans.com/t/slime-blower-from-ghostbusters-ii-project-completed/594>\
**Category:** Slime Blowers\
**Created:** [March 2, 2006, 5:57am UTC](https://forum.gbfans.com/t/slime-blower-from-ghostbusters-ii-project-completed/594 "2006-03-02T05:57:38Z")\
**Posts on this page:** 5\
**Page:** 3

<div class="post-metadata">

**Author:** ![Dr\_Ray\_Stantz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/f07891/32.png) [@Dr\_Ray\_Stantz](https://forum.gbfans.com/u/Dr_Ray_Stantz)\
**Post date:** [April 17, 2006, 6:32pm UTC](https://forum.gbfans.com/t/slime-blower-from-ghostbusters-ii-project-completed/594/41 "2006-04-17T18:32:02Z")

</div>

It’s what I wanted to know…but damn…I screwed up… I already closed off my tank and forgot about the straps…do you think using an anchor screw would work?

---

<div class="post-metadata">

**Author:** ![TK-194](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/ebca7d/32.png) [@TK-194](https://forum.gbfans.com/u/TK-194)\
**Post date:** [April 17, 2006, 10:02pm UTC](https://forum.gbfans.com/t/slime-blower-from-ghostbusters-ii-project-completed/594/42 "2006-04-17T22:02:13Z")

</div>

Dr. Ray,

The problem, in my conception is not the way to fix it. Is to keep it SECURELY fixed. I mean, fix it a way it will not escape or break the tank.

I can recommend you to use some rivets, but the point where the rives should be added needs to be reinforced, to support the pack’s weight.

This is why I made a reinforcement area.

Think about it. Hope could help.

See’ya!

---

<div class="post-metadata">

**Author:** ![cole-funstuff](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cole-funstuff/32/33_2.png) [@cole-funstuff](https://forum.gbfans.com/u/cole-funstuff)\
**Post date:** [April 17, 2006, 11:48pm UTC](https://forum.gbfans.com/t/slime-blower-from-ghostbusters-ii-project-completed/594/43 "2006-04-17T23:48:05Z")

</div>

Ray,

Use a toggle bolt. All you would need to do then is drill out a 1/2" hole and push the bolt through. It will expand inside and give you A LOT of strength.

Cole,

---

<div class="post-metadata">

**Author:** ![Dr\_Ray\_Stantz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/f07891/32.png) [@Dr\_Ray\_Stantz](https://forum.gbfans.com/u/Dr_Ray_Stantz)\
**Post date:** [April 18, 2006, 12:35am UTC](https://forum.gbfans.com/t/slime-blower-from-ghostbusters-ii-project-completed/594/44 "2006-04-18T00:35:11Z")

</div>

Thanks protonguy, thats what I needed. My problem was, the ends of my main tank were already domed using gorilla glue and it would just suck to have to dismantle it. I glued it before putting straps on so…I need away around destroying it to fix it… :shock:

---

<div class="post-metadata">

**Author:** ![TK-194](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/ebca7d/32.png) [@TK-194](https://forum.gbfans.com/u/TK-194)\
**Post date:** [April 18, 2006, 3:35am UTC](https://forum.gbfans.com/t/slime-blower-from-ghostbusters-ii-project-completed/594/45 "2006-04-18T03:35:06Z")

</div>

Dr. Ray,

Sorry but I don’t know some specific grammar in English, to report everything.

The regular languages’ problems… 🙂

Thanks!

[Previous page](https://forum.gbfans.com/t/slime-blower-from-ghostbusters-ii-project-completed/594.md?page=2)