# Slime Blower parts checklist **URL:** \ **Category:** Slime Blowers\ **Created:** [October 11, 2012, 2:08pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859 "2012-10-11T14:08:47Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [October 11, 2012, 2:08pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/1 "2012-10-11T14:08:47Z")
Several people have asked about a checklist similar to the [Proton pack](https://www.gbfans.com/wiki/equipment/proton-pack) one for the Slimeblower. So lets start off and please feel free to add to it and we’ll end up with a definitive list for those taking on the build. Mods if you could make this a sticky and allow people to edit it? Pack: [Alice pack frame](https://www.gbfans.com/shop/alice-pack-frame-lc-2) Aluminum fitting bracket Aluminum cross braces x 2 Main tank mount x 1 (1/8" x 4" x 15" approx.) Grey vest with chest plates Aluminum mounting plates ( 1/4" square plate and 1/8" angled plate) Aluminum pump boxes x 2 2’ Aluminum tube spacer x 1 (1.5" long) Suitable heatsinks for pump boxes x 2 Large main tank (grey) 9.5" x 36" tall Small side tanks x 2 (green) 4" x 19.75" tall, 5" x 17.75" tall 5"- 6" Round ball (red) Brass Fittings and 1/2" hose hose clamps x 2 3/4" Parker brass fittings or suitable substitute (BST-6 x 2, BST-6M x 1, ) Set of spotlights (Variflex, Cateye or King Sword) Project boxes x 2 (Bud #PS11327-G, #PS11521-G) Box greeblies x 1 set LED lenses (green domed, amber flat top, large green flat top) Lower battery box x 1 Battery heatsink x 1 Split loom (3/8" ) 6 ft approx Decal set x 1 Head rest x1 Gun: Main gun tube, Aluminum or other suitable material (4.5" O.D) clamshell with hinge x 1 # 6 button head bolts Nose cone x 1 Nozzle tip x1 End cap x1 #8 button head bolts U- Handle, with bolt and plate x1 5" hose clamps x 2 Black control boxes x 2 Toggle switch x 1 Large green indicator light x1 Brass fittings x 2 [Red tubing](https://www.gbfans.com/shop/14-tubing-red) x 1 Shoulder strap with mounting rings and 1/4" [p-clamps](https://www.gbfans.com/wiki/uncategorized/p-clamp) x1 Side discharge lever with AME grip x 1 3/4" Parker brass fittings or suitable substitute (BST-6 x 3) Hoses: Suitable hoses (1.5" OD - 2" OD) \*preferably cloth covered 3/4" Parker brass fittings or suitable substitute (BST-N6M x 3) Optional: Light kit, Sound kit, speaker, amp ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [October 11, 2012, 6:44pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/2 "2012-10-11T18:44:25Z")
Nice work man. The only thing I noticed is a socket is needed for the Large Flat Green lens. In my opinion; The “Lower Batter Box” appears to be some sort of Loaf Pan… but what kind? and would modification (chopping it down to size) explain why its painted. ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [October 11, 2012, 7:08pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/3 "2012-10-11T19:08:40Z")
Also, Here’s what info I’ve collect on the Parker Fittings: Brass Fittings: Quanity-5 or 6\*\* of BST-6 , Female quick connect, female threads. Three on the pack. Two or One on gun.\*\* Quanity-1 or 0\*\* of BST-6M ,Female quick connect, male threads, One on back of gun.\*\* Quanity-3 of ST-N6 ,Male quick connect, female threads, used on hoses.\*\*\* Quanity-1 of 1/4DD44B Elbow used on ball Quanity-1 of 1/4X3/8FF33B reducer used on elbow and ball. \*\*One of the Blower guns appears to have one BST-6 and one BST-6M on the end. \*\*\*Another possible variation, The use of these brass Male portions of the quick connect. I could be wrong but the pics in the Reference appear to have these screwed into the Steel Fitting below. The other variation being, just use the Steel Fittings. STEEL FITTINGS: Quanity-3 of ST-N6 ,Male quick connect, female threads, used on hoses. ---
**Author:** ![Goffcorp](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/e56c9b/32.png) [@Goffcorp](https://forum.gbfans.com/u/Goffcorp)\ **Post date:** [October 11, 2012, 7:11pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/4 "2012-10-11T19:11:28Z")
I was under the impression it was some kind of plastic tray. When looking at the reference pics, the gauge of the material looks pretty thick. My guess is it might be some kind of slide out tray. Goff ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [October 11, 2012, 7:20pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/5 "2012-10-11T19:20:52Z")
Pack: [Alice pack frame](https://www.gbfans.com/shop/alice-pack-frame-lc-2) Aluminum fitting bracket Aluminum cross braces x 2 Main tank mount x 1 (1/8" x 4" x 15" approx.) Grey vest with chest plates Aluminum mounting plates ( 1/4" square plate and 1/8" angled plate) Aluminum pump boxes x 2 2’ Aluminum tube spacer x 1 (1.5" long) Suitable heatsinks for pump boxes x 2 Large main tank (grey) 9.5" x 36" tall Small side tanks x 2 (green) 4" x 19.75" tall, 5" x 17.75" tall 5"- 6" Round ball (red) Brass Fittings ( 1/4 DD44B, 1/4 x 3/8 FF33B reducer) and 1/2" hose Hose clamps x 2 3/4" Parker brass fittings or suitable substitute (BST-6 x 2, BST-6M x 1, ) Set of spotlights (Variflex, Cateye or King Sword) Project boxes x 2 (Bud #PS11327-G, #PS11521-G) Box greeblies x 1 set LED lenses (green domed, amber flat top, large green flat top with bezel) Lower battery box (likely a custom made piece from one or more items) x 1 Battery heatsink x 1 Split loom (3/8" ) 6 ft approx Decal set x 1 Head rest x1 Gun: Main gun tube, Aluminum or other suitable material (4.5" O.D) clamshell with hinge x 1 # 6 button head bolts Nose cone x 1 Nozzle tip x1 End cap x1 #8 button head bolts U- Handle, with bolt and plate x1 5" hose clamps x 2 Black control boxes x 2 Toggle switch x 1 Large green indicator light with bezel x1 Brass fittings x 2 [Red tubing](https://www.gbfans.com/shop/14-tubing-red) x 1 Shoulder strap with mounting rings and 1/4" [p-clamps](https://www.gbfans.com/wiki/uncategorized/p-clamp) x1 Side discharge lever with AME grip x 1 3/4" Parker brass fittings or suitable substitute (BST-6 x 3) Hoses: Suitable hoses (1.5" OD - 2" OD) \*preferably cloth covered 3/4" Parker brass fittings or suitable substitute (BST-N6M x 3) or Quanity-3 of ST-N6 ,Male quick connect, female threads, used on hoses.(Steel version) Optional: Light kit, Sound kit, speaker, amp ---
**Author:** ![Wallabe](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/w/eb9ed0/32.png) [@Wallabe](https://forum.gbfans.com/u/Wallabe)\ **Post date:** [October 11, 2012, 9:34pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/6 "2012-10-11T21:34:27Z")
This is a great list. Thanks for getting it started. Depending on how precise you want to be, I’d change “Shoulder strap with mounting rings and 1/4” [p-clamps](https://www.gbfans.com/wiki/uncategorized/p-clamp) x1" to “5-panel 2” black seatbelt webbing or suitable substitute shoulder strap with mounting rings and 1/4" p-clamps x1" ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [October 31, 2012, 1:33am UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/7 "2012-10-31T01:33:26Z")
Been doing a little research/discussing the Fittings used on the hoses and it would seem you only need the ST-N6 Male w/ Female threads Steel Fittings. Any objections to this? ---
**Author:** ![nick-a-tron](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/fbc32d/32.png) [@nick-a-tron](https://forum.gbfans.com/u/nick-a-tron)\ **Post date:** [October 31, 2012, 3:49pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/8 "2012-10-31T15:49:49Z")
None from me 🙂 ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [October 31, 2012, 6:48pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/9 "2012-10-31T18:48:11Z")
Pack: [Alice pack frame](https://www.gbfans.com/shop/alice-pack-frame-lc-2) Aluminum fitting bracket Aluminum cross braces x 2 Main tank mount x 1 (1/8" x 4" x 15" approx.) Grey vest with chest plates Aluminum mounting plates ( 1/4" square plate and 1/8" angled plate) Aluminum pump boxes x 2 2’ Aluminum tube spacer x 1 (1.5" long) Suitable heatsinks for pump boxes x 2 Large main tank (grey) 9.5" x 36" tall Small side tanks x 2 (green) 4" x 19.75" tall, 5" x 17.75" tall 5"- 6" Round ball (red) Brass Fittings ( 1/4 DD44B, 1/4 x 3/8 FF33B reducer) and 1/2" hose Hose clamps x 2 3/4" Parker brass fittings or suitable substitute (BST-6 x 2, BST-6M x 1, ) Set of spotlights (Variflex, Cateye or King Sword) Project boxes x 2 (Bud #PS11327-G, #PS11521-G) Box greeblies x 1 set LED lenses (green domed, amber flat top, large green flat top with bezel) Lower battery box (likely a custom made piece from one or more items) x 1 Battery heatsink x 1 Split loom (3/8" ) 6 ft approx Decal set x 1 Head rest x1 Gun: Main gun tube, Aluminum or other suitable material (4.5" O.D) clamshell with hinge x 1 # 6 button head bolts Nose cone x 1 Nozzle tip x1 End cap x1 #8 button head bolts U- Handle, with bolt and plate x1 5" hose clamps x 2 Black control boxes x 2 Toggle switch x 1 Large green indicator light with bezel x1 Brass fittings x 2 [Red tubing](https://www.gbfans.com/shop/14-tubing-red) x 1 Shoulder strap with mounting rings and 1/4" [p-clamps](https://www.gbfans.com/wiki/uncategorized/p-clamp) x1 Side discharge lever with AME grip x 1 3/4" Parker brass fittings or suitable substitute (BST-6 x 3) Hoses: Suitable hoses (1.5" OD - 2" OD) \*preferably cloth covered Quanity-3 of ST-N6 ,Male quick connect, female threads, used on hoses.(Steel version) Optional: Light kit, Sound kit, speaker, amp ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [November 5, 2012, 8:56pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/10 "2012-11-05T20:56:41Z")
Another little detail for the super accurate. LC-1 shoulders are needed. The kidney appears to be a modified LC-2 with the Newer Clip. Similar to this one: ![image](http://www.uscav.com/prodinfo/enlarged/6895L.jpg) I want to say the Nylon webbing on it is more Tan that Olive but I may be wrong. ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [January 1, 2013, 6:56pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/11 "2013-01-01T18:56:47Z")
Edited Pack: [Alice pack frame](https://www.gbfans.com/shop/alice-pack-frame-lc-2) with LC-1 shoulder straps and LC-2 kidney strap with larger plastic buckle Aluminum fitting bracket Aluminum cross braces x 2 Main tank mount x 1 (1/8" x 4" x 15" approx.) Grey vest with chest plates Aluminum mounting plates ( 1/4" square plate and 1/8" angled plate) Aluminum pump boxes x 2 2’ Aluminum tube spacer x 1 (1.5" long) Suitable heatsinks for pump boxes x 2 Large main tank (grey) 9.5" x 36" tall Small side tanks x 2 (green) 4" x 19.75" tall, 5" x 17.75" tall 5"- 6" Round ball (red) Brass Fittings ( 1/4 DD44B, 1/4 x 3/8 FF33B reducer) and 1/2" hose Hose clamps x 2 3/4" Parker brass fittings or suitable substitute (BST-6 x 2, BST-6M x 1, ) Set of spotlights (Variflex, Cateye or King Sword) Project boxes x 2 (Bud #PS11327-G, #PS11521-G) Box greeblies x 1 set LED lenses (green domed, amber flat top, large green flat top with bezel) Lower battery box (likely a custom made piece from one or more items) x 1 Battery heatsink x 1 Split loom (3/8" ) 6 ft approx Decal set x 1 Head rest x1 Gun: Main gun tube, Aluminum or other suitable material (4.5" O.D) clamshell with hinge x 1 # 6 button head bolts Nose cone x 1 Nozzle tip x1 End cap x1 #8 button head bolts U- Handle, with bolt and plate x1 5" hose clamps x 2 Black control boxes x 2 Toggle switch x 1 Large green indicator light with bezel x1 Brass fittings x 2 [Red tubing](https://www.gbfans.com/shop/14-tubing-red) x 1 Shoulder strap with mounting rings and 1/4" [p-clamps](https://www.gbfans.com/wiki/uncategorized/p-clamp) x1 Side discharge lever with AME grip x 1 3/4" Parker brass fittings or suitable substitute (BST-6 x 3) Hoses: Suitable hoses (1.5" OD - 2" OD) \*preferably cloth covered Quanity-3 of ST-N6 ,Male quick connect, female threads, used on hoses.(Steel version) Optional: Light kit, Sound kit, speaker, amp ---
**Author:** ![Jimmy\_Miller](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/ee7513/32.png) [@Jimmy\_Miller](https://forum.gbfans.com/u/Jimmy_Miller)\ **Post date:** [March 12, 2013, 6:37pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/12 "2013-03-12T18:37:07Z")
I had a question on the tanks. The main tank on the [Slime Blower](https://www.gbfans.com/wiki/equipment/slime-blower) Plans v1.0 here on GBFans states it’s 11 inch diameter by 43 25/32 inches tall. Then the two side tanks are 5 23/32 inches by 20 2/10 inches tall and 4 13/64 inches by 23 2/10 inches tall. In the main tank measurements of yours Colin that is a very large difference. Which should a person really rely on? If the plans are that far off shouldn’t they be fixed on the main website? ---
**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\ **Post date:** [March 12, 2013, 6:54pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/13 "2013-03-12T18:54:37Z")
> [@Jimmy Miller](#): > > If the plans are that far off shouldn’t they be fixed on the main website? Anyone that wishes to update the plans is more than welcome to do so. ---
**Author:** ![Jimmy\_Miller](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/ee7513/32.png) [@Jimmy\_Miller](https://forum.gbfans.com/u/Jimmy_Miller)\ **Post date:** [March 12, 2013, 7:02pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/14 "2013-03-12T19:02:35Z")
That isn’t the fix though. Which one is off? ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [March 12, 2013, 8:53pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/15 "2013-03-12T20:53:43Z")
Refer to these amazing build threads [Nicatron’s](http://www.gbfans.com/community/viewtopic.php?f=6&t=26670) [Goffcorp’s](http://www.gbfans.com/community/viewtopic.php?f=6&t=30268) [GeKx’s](http://www.gbfans.com/community/viewtopic.php?f=6&t=31552) ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [March 13, 2013, 12:11am UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/16 "2013-03-13T00:11:06Z")
I feel privileged to be a part of that list; Thanks man. ---
**Author:** ![janderson392](https://forum.gbfans.com/user_avatar/forum.gbfans.com/janderson392/32/182343_2.png) [@janderson392](https://forum.gbfans.com/u/janderson392)\ **Post date:** [April 14, 2013, 12:51am UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/17 "2013-04-14T00:51:18Z")
Quick question on the Parker quick connects. The list says 2 BST-6 and 1 BST-6M on the gun and 3 BST-6 on the gun. I am wondering if they shouldn’t all be BST-6 from the build threads I have seen. I just can’t really tell from the screen grabs where the single BST-6M would go. I would assume that it is the one behind the angular bent aluminum strip in the bottom left of the alice frame. I want to make sure that this build is as accurate as possible. Also how do the hoses connect to the pack with only quick connects on the gun side. Sorry if this was a confusing post. Thank you, Adam ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [April 14, 2013, 1:21pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/18 "2013-04-14T13:21:45Z")
The BST6M goes on the Alice frame behind the aluminum bracket, where the two hoses connect to the pump box you dont really need fittings since the hose covers completely so not much point in spending the money for fittings, you can use some grey male/female pvc conduit connectors to attach to the box and hoses attach to them. Hope that helps. ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [April 14, 2013, 4:33pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/19 "2013-04-14T16:33:41Z")
The BST-6M goes on the back of the Gun. ![image](http://www.gbfans.com/images/store/235_5639519580.jpg) See that short one on the right. For the pump boxes I used two 3/4" PVC Male Adapters. Like this: ![image](http://www.fleetfarm.com/products/images/medium/0000000065179.jpg) Painted and attached: ![image](https://lh6.googleusercontent.com/-3NVUjB9EExA/UKMSeW2MhtI/AAAAAAAAEbc/WjmbP-MXqXg/s1068/IMG_20121113_213016.jpg) How I went about attaching my hoses was I placed them on the fitting and used a little bit of tape to hold them in place. Then, I used a hose clamp to really secure it and then wrapped that all in tape: ![image](https://lh5.googleusercontent.com/-Cj9AyBV2ej4/UPRBWE9R73I/AAAAAAAAE7E/JyQ6R2zDWas/s1068/IMG_20130113_220204.jpg) I then used a couple 3/4" conduit lock-nuts and some hot glue to secure them. ![image](https://lh3.googleusercontent.com/-ZYECoahygw8/UWrjaKKn_6I/AAAAAAAAFd0/SEZGi3dMUDU/s513/photo.jpg) Sorry for the rubbish pic, I cropped it from a old photo I had. ---
**Author:** ![janderson392](https://forum.gbfans.com/user_avatar/forum.gbfans.com/janderson392/32/182343_2.png) [@janderson392](https://forum.gbfans.com/u/janderson392)\ **Post date:** [April 14, 2013, 7:25pm UTC](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859/20 "2013-04-14T19:25:48Z")
Awesome, thanks for the pics. This will be very helpful for getting my build started. [Next page](https://forum.gbfans.com/t/slime-blower-parts-checklist/10859.md?page=2)