# Speaker Mounting?

**URL:** <https://forum.gbfans.com/t/speaker-mounting/5739>\
**Category:** Proton Packs\
**Created:** [August 20, 2019, 6:42pm UTC](https://forum.gbfans.com/t/speaker-mounting/5739 "2019-08-20T18:42:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![GBDRE760](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/b77776/32.png) [@GBDRE760](https://forum.gbfans.com/u/GBDRE760)\
**Post date:** [August 20, 2019, 6:42pm UTC](https://forum.gbfans.com/t/speaker-mounting/5739/1 "2019-08-20T18:42:22Z")

</div>

For those that have done a build with full lights and sounds, how did you go about mounting your speaker? I am thinking of 3D printing a mesh / speaker grill-like thing and using it to drill a series of holes in the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) that will basically act as a speaker grill. As far as mounting it goes, I have no clue. I was kind of thinking four nuts and bolts and spacers and use the spacers to stand the speaker off of the motherboard and use the nuts and bolts going through the motherboard, spacers, and speaker mounting holes, making sure the paint the hardware black to match the motherboard and blend in. Does that sound about right or is there a better way to “hide” the speaker?

---

<div class="post-metadata">

**Author:** ![christof](https://forum.gbfans.com/user_avatar/forum.gbfans.com/christof/32/187349_2.png) [@christof](https://forum.gbfans.com/u/christof)\
**Post date:** [August 20, 2019, 7:14pm UTC](https://forum.gbfans.com/t/speaker-mounting/5739/2 "2019-08-20T19:14:25Z")

</div>

That’s not too far off what I did on my build. Marked out a simple grid pattern between the four mounting holes for the speakers on my mother board, then drilled a bunch of holes. Then I used some nuts and bolts to stand off the speakers so they had some room off of the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard).

---

<div class="post-metadata">

**Author:** ![bishopdonmiguel](https://forum.gbfans.com/user_avatar/forum.gbfans.com/bishopdonmiguel/32/188541_2.png) [@bishopdonmiguel](https://forum.gbfans.com/u/bishopdonmiguel)\
**Post date:** [August 21, 2019, 1:23am UTC](https://forum.gbfans.com/t/speaker-mounting/5739/3 "2019-08-21T01:23:26Z")

</div>

Probably many good references in member pack builds. Here is how I tackled it…

[Speaker Grille](http://www.gbfans.com/forum/viewtopic.php?p=4808466#p4808466)

[Speaker Mounting](http://www.gbfans.com/forum/viewtopic.php?p=4810429#p4810429)

The speakers mount through the [Motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) and use nylon spacers to space it a bit from the aluminum.

---

<div class="post-metadata">

**Author:** ![GBDRE760](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/b77776/32.png) [@GBDRE760](https://forum.gbfans.com/u/GBDRE760)\
**Post date:** [August 21, 2019, 2:16am UTC](https://forum.gbfans.com/t/speaker-mounting/5739/4 "2019-08-21T02:16:40Z")

</div>

> [@bishopdonmiguel post\_id=4922898 time=1566350606 user\_id=42359](#):
>
> Probably many good references in member pack builds. Here is how I tackled it…
> 
> [Speaker Grille](http://www.gbfans.com/forum/viewtopic.php?p=4808466#p4808466)
> 
> [Speaker Mounting](http://www.gbfans.com/forum/viewtopic.php?p=4810429#p4810429)
> 
> The speakers mount through the Motherboard and use nylon spacers to space it a bit from the aluminum.

WOW… That’s over the top cool! Especially your design for the holes that you drilled for the specker to sit behind. Good stuff. Thanks for the advice.
