# Speaker up or down???

**URL:** <https://forum.gbfans.com/t/speaker-up-or-down/31366>\
**Category:** Proton Packs\
**Created:** [September 3, 2017, 9:33pm UTC](https://forum.gbfans.com/t/speaker-up-or-down/31366 "2017-09-03T21:33:33Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Reppert7](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/9fc348/32.png) [@Reppert7](https://forum.gbfans.com/u/Reppert7)\
**Post date:** [September 3, 2017, 9:33pm UTC](https://forum.gbfans.com/t/speaker-up-or-down/31366/1 "2017-09-03T21:33:33Z")

</div>

for anyone that has sound on their pack, has anyone had better luck putting the speakers facing your back or facing out? any input is appreciated!!!

---

<div class="post-metadata">

**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\
**Post date:** [September 3, 2017, 11:43pm UTC](https://forum.gbfans.com/t/speaker-up-or-down/31366/2 "2017-09-03T23:43:43Z")

</div>

Usually if you are running one speaker, you want it mounted facing your back wth sound holes cut out of the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard). If you have two speakers, you can do one of each.

---

<div class="post-metadata">

**Author:** ![Ecto-3A](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/6f9a4e/32.png) [@Ecto-3A](https://forum.gbfans.com/u/Ecto-3A)\
**Post date:** [September 4, 2017, 8:00pm UTC](https://forum.gbfans.com/t/speaker-up-or-down/31366/3 "2017-09-04T20:00:17Z")

</div>

Mounting the speaker facing outward (your back) will be much easier. Jjust add some nylon or rubber spacers to absorb vibrations and create a slight air gap between the speaker frame and the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard). If you’re using more than one speaker, such as a subwoofer for additional base, you’ll want that space to help with air pressure.

---

<div class="post-metadata">

**Author:** ![Reppert7](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/9fc348/32.png) [@Reppert7](https://forum.gbfans.com/u/Reppert7)\
**Post date:** [September 4, 2017, 9:12pm UTC](https://forum.gbfans.com/t/speaker-up-or-down/31366/4 "2017-09-04T21:12:55Z")

</div>

> [@Ecto-3A](#):
>
> Mounting the speaker facing outward (your back) will be much easier. Jjust add some nylon or rubber spacers to absorb vibrations and create a slight air gap between the speaker frame and the motherboard. If you’re using more than one speaker, such as a subwoofer for additional base, you’ll want that space to help with air pressure.

Thank you all for your help btw these all have been incredible tips and a help… and I’m sorry for such a noob question, but where exactly do you add the spacers at???

---

<div class="post-metadata">

**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\
**Post date:** [September 5, 2017, 4:40am UTC](https://forum.gbfans.com/t/speaker-up-or-down/31366/5 "2017-09-05T04:40:32Z")

</div>

If you’re mounting the speaker facing the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) and you make holes or add a grill, you don’t need any spacers.

---

<div class="post-metadata">

**Author:** ![Ecto-3A](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/6f9a4e/32.png) [@Ecto-3A](https://forum.gbfans.com/u/Ecto-3A)\
**Post date:** [September 5, 2017, 3:36pm UTC](https://forum.gbfans.com/t/speaker-up-or-down/31366/6 "2017-09-05T15:36:21Z")

</div>

I used spacers for vibrations between the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) and the speaker frame. You don’t have to use them, but I personally prefer them.

---

<div class="post-metadata">

**Author:** ![Reppert7](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/9fc348/32.png) [@Reppert7](https://forum.gbfans.com/u/Reppert7)\
**Post date:** [September 5, 2017, 8:33pm UTC](https://forum.gbfans.com/t/speaker-up-or-down/31366/7 "2017-09-05T20:33:07Z")

</div>

thank you all so much, this was a great help!!!

---

<div class="post-metadata">

**Author:** ![J-place](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6f9a4e/32.png) [@J-place](https://forum.gbfans.com/u/J-place)\
**Post date:** [September 8, 2017, 5:28pm UTC](https://forum.gbfans.com/t/speaker-up-or-down/31366/8 "2017-09-08T17:28:08Z")

</div>

Now if you want the vibrations us a transducer speaker. I built by son a mini pack and the 4" traditional speaker was a little heavy for him. I replaced the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) and added a smaller and lighter transducer speaker and its quite an awesome effect. Keep in mind this speaker is designed to vibrate the objects its mounted on and literally turn the object in to the speaker. You do loose some bass and everything vibrating will give some distortion. But on my sons pack the loss is actually a gain in effect. The sounds are so mechanical in nature that the distortion is hardly noticeable and people touching the pack believe there is something very real going inside.

I’ve been working on my matching pack and plan on using a combination transducer and micro subwoofer to port out the [booster tube](https://www.gbfans.com/wiki/equipment/proton-pack/booster-tube) for extra sound volume.
