# speakers....... **URL:** \ **Category:** Proton Packs\ **Created:** [March 19, 2011, 3:10am UTC](https://forum.gbfans.com/t/speakers/11432 "2011-03-19T03:10:13Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![renashoth](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/r/7cd45c/32.png) [@renashoth](https://forum.gbfans.com/u/renashoth)\ **Post date:** [March 19, 2011, 3:10am UTC](https://forum.gbfans.com/t/speakers/11432/1 "2011-03-19T03:10:13Z")
wat type of speaker should i be using. i want it to be loud enough to heard or even adjustable. would a car speaker work lol? im going to try to hook a extra line so i can play the whole soundtrack on a cheap mp3 player ---
**Author:** ![JayStantz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e274bd/32.png) [@JayStantz](https://forum.gbfans.com/u/JayStantz)\ **Post date:** [April 12, 2011, 12:54am UTC](https://forum.gbfans.com/t/speakers/11432/2 "2011-04-12T00:54:14Z")
I have been wondering about this as well. In the DIY sound thread by MattBurkit? I think, he recommends some speakers. I believe they are 4 inch woofers that are 8 Ohms. I believe most car audio speakers are woofers and tweeter combos, but most are 4 Ohms. So the question is: Does that matter? 4 Ohm vs. 8 Ohm? Does anyone have any more information or a link to a topic that discusses Ohms further? ---
**Author:** ![m\_burkit](https://forum.gbfans.com/user_avatar/forum.gbfans.com/m_burkit/32/187890_2.png) [@m\_burkit](https://forum.gbfans.com/u/m_burkit)\ **Post date:** [April 12, 2011, 1:01am UTC](https://forum.gbfans.com/t/speakers/11432/3 "2011-04-12T01:01:58Z")
The amp that I recommend puts out 8 ohms. So you can use 1 8 ohm speaker or 2 4 ohm speakers in parallel. It’s up to you but that’s why I recommended the 8 ohm speakers that way you’d be safe with either set up. ---
**Author:** ![cole-funstuff](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cole-funstuff/32/33_2.png) [@cole-funstuff](https://forum.gbfans.com/u/cole-funstuff)\ **Post date:** [April 12, 2011, 5:17am UTC](https://forum.gbfans.com/t/speakers/11432/4 "2011-04-12T05:17:44Z")
If the amp says to use 8 ohms then you NEED to use at least an 8 ohm speaker. If you try and hook up a 4 ohm speaker you’ll be drawing twice as much current from the amp which might cause it to overheat or simply stop working. The other thing to consider when buying a speaker is the power it is rated for. If you’re amp puts out 5 watts, then you’ll want to make sure the speaker you hook up to it is rated at least 5 watts. Finally, you should also look at the frequency response of the speaker. You want a lower Hz number and a higher kHz number in the rating to put it simply. That way you make sure your speaker is able to put out any frequency your amp might throw at it. Cole, ---
**Author:** ![JayStantz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e274bd/32.png) [@JayStantz](https://forum.gbfans.com/u/JayStantz)\ **Post date:** [April 12, 2011, 10:35pm UTC](https://forum.gbfans.com/t/speakers/11432/5 "2011-04-12T22:35:42Z")
Thanks for the replies. This is much needed information. I’m sure as more of us are adding sound to our packs, I am not the only one wondering about these things. ---
**Author:** ![parksdesign](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/77aa72/32.png) [@parksdesign](https://forum.gbfans.com/u/parksdesign)\ **Post date:** [April 12, 2011, 10:53pm UTC](https://forum.gbfans.com/t/speakers/11432/6 "2011-04-12T22:53:09Z")
I got 2 of these. [http://www.allelectronics.com/make-a-store/item/GM-858/5.25-60W-MIDRANGE-DRIVER-8-OHM//1.html](http://www.allelectronics.com/make-a-store/item/GM-858/5.25-60W-MIDRANGE-DRIVER-8-OHM//1.html) Rob at replica props told me it was a good choice for the DIY sound chip setup. ---
**Author:** ![MitchellStang](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/82dd89/32.png) [@MitchellStang](https://forum.gbfans.com/u/MitchellStang)\ **Post date:** [April 26, 2011, 6:30am UTC](https://forum.gbfans.com/t/speakers/11432/7 "2011-04-26T06:30:46Z")
> [@mburkit](#): > > The amp that I recommend puts out 8 ohms. So you can use 1 8 ohm speaker or 2 4 ohm speakers in parallel. It’s up to you but that’s why I recommended the 8 ohm speakers that way you’d be safe with either set up. Wouldn’t you want to put the 2 - 4ohm speakers in series? In series the circuit would total 8ohms, where as if you put them in parallel that would make the circuit 2ohms. ---
**Author:** ![Tyrael](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a6a055/32.png) [@Tyrael](https://forum.gbfans.com/u/Tyrael)\ **Post date:** [April 27, 2011, 4:56pm UTC](https://forum.gbfans.com/t/speakers/11432/8 "2011-04-27T16:56:50Z")
> [@MitchellStang](#): > > > [@mburkit](#): > > > > The amp that I recommend puts out 8 ohms. So you can use 1 8 ohm speaker or 2 4 ohm speakers in parallel. It’s up to you but that’s why I recommended the 8 ohm speakers that way you’d be safe with either set up. > > Wouldn’t you want to put the 2 - 4ohm speakers in series? In series the circuit would total 8ohms, where as if you put them in parallel that would make the circuit 2ohms. This is correct. In parallel, the equivalent resistance is 2Ω, while in series it’s 8Ω. ---
**Author:** ![nolatron](https://forum.gbfans.com/user_avatar/forum.gbfans.com/nolatron/32/4010_2.png) [@nolatron](https://forum.gbfans.com/u/nolatron)\ **Post date:** [April 27, 2011, 5:12pm UTC](https://forum.gbfans.com/t/speakers/11432/9 "2011-04-27T17:12:33Z")
Here’s what Rob from Replica Props posted about using 2 speakers with the suggest 8ohm amp. [http://www.gbfans.com/community/viewtopic.php?f=2&t=21733&p=264973&hilit=+speakers#p264973](http://www.gbfans.com/community/viewtopic.php?f=2&t=21733&p=264973&hilit=+speakers#p264973) > [@](#): > > So using 2 speakers with the sound module you either want to > > 1. wire 2 4ohm speakers in series to get to 8ohm > > or > > 1. wire 2 16ohm speakers in parallel to get to 8ohm > > ![image](http://www.aqdi.com/speakerz1.gif) ---
**Author:** ![m\_burkit](https://forum.gbfans.com/user_avatar/forum.gbfans.com/m_burkit/32/187890_2.png) [@m\_burkit](https://forum.gbfans.com/u/m_burkit)\ **Post date:** [April 27, 2011, 6:58pm UTC](https://forum.gbfans.com/t/speakers/11432/10 "2011-04-27T18:58:07Z")
> [@MitchellStang](#): > > > [@mburkit](#): > > > > The amp that I recommend puts out 8 ohms. So you can use 1 8 ohm speaker or 2 4 ohm speakers in parallel. It’s up to you but that’s why I recommended the 8 ohm speakers that way you’d be safe with either set up. > > Wouldn’t you want to put the 2 - 4ohm speakers in series? In series the circuit would total 8ohms, where as if you put them in parallel that would make the circuit 2ohms. Yeah, sorry, I had it backwards, my bad. You’d want 2 4 ohm speakers in a series or 2 8 ohm speakers in parallel. ---
**Author:** ![slime\_me\_please](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/a183cd/32.png) [@slime\_me\_please](https://forum.gbfans.com/u/slime_me_please)\ **Post date:** [April 27, 2011, 7:41pm UTC](https://forum.gbfans.com/t/speakers/11432/11 "2011-04-27T19:41:02Z")
yeah make sure its a good quality 2 way speaker or 3 way as you may get some serious distortion from the speaker ---
**Author:** ![aceblackbelt](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/c6cbf5/32.png) [@aceblackbelt](https://forum.gbfans.com/u/aceblackbelt)\ **Post date:** [May 22, 2011, 12:38am UTC](https://forum.gbfans.com/t/speakers/11432/12 "2011-05-22T00:38:45Z")
Does anyone have a preference in drilling holes for the speakers in the mobo or having the speakers face the shell. ---
**Author:** ![tk-fett](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a87d85/32.png) [@tk-fett](https://forum.gbfans.com/u/tk-fett)\ **Post date:** [July 20, 2012, 2:19pm UTC](https://forum.gbfans.com/t/speakers/11432/13 "2012-07-20T14:19:26Z")
I see alot of people now have speakers, is there any update to this information? ---
**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\ **Post date:** [July 20, 2012, 4:31pm UTC](https://forum.gbfans.com/t/speakers/11432/14 "2012-07-20T16:31:17Z")
I’m currently using one 8 ohm 6x9 from autozone. It ran me about $15 I want to say but is plenty loud. Look for the one in the plastic clamshell. I’m not sure about the all-in-one setup AJ has in the works. If you want more than one speaker you will still need to achive 8 ohms for the current setups. ---
**Author:** ![tk-fett](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a87d85/32.png) [@tk-fett](https://forum.gbfans.com/u/tk-fett)\ **Post date:** [July 20, 2012, 5:13pm UTC](https://forum.gbfans.com/t/speakers/11432/15 "2012-07-20T17:13:23Z")
If I start with one speaker and decide I want another how hard is it to add another speaker later on? ---
**Author:** ![Tyrael](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a6a055/32.png) [@Tyrael](https://forum.gbfans.com/u/Tyrael)\ **Post date:** [July 21, 2012, 3:44am UTC](https://forum.gbfans.com/t/speakers/11432/16 "2012-07-21T03:44:14Z")
You can find a pair of 4Ω, 3-way speakers at Wal-mart for about $25-30, or on eBay for $20-25 pretty easily. I wouldn’t recommend going with a single 4Ω speaker in preparation of getting a second; electronics and such. ---
**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\ **Post date:** [July 22, 2012, 12:29am UTC](https://forum.gbfans.com/t/speakers/11432/17 "2012-07-22T00:29:28Z")
Just a tip, if you put it inside an enclosure, it will sound better.. Its what I did. Sounds great. ---
**Author:** ![blackeyespecialist88](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/b/6a8cbe/32.png) [@blackeyespecialist88](https://forum.gbfans.com/u/blackeyespecialist88)\ **Post date:** [July 23, 2012, 1:09am UTC](https://forum.gbfans.com/t/speakers/11432/18 "2012-07-23T01:09:51Z")
> [@CPU64](#): > > Just a tip, if you put it inside an enclosure, it will sound better.. Its what I did. Sounds great. Facing the shell or mobo? Sent from my T-Mobile G2 using Ghostbusters Fans on Android ---
**Author:** ![tk-fett](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a87d85/32.png) [@tk-fett](https://forum.gbfans.com/u/tk-fett)\ **Post date:** [July 23, 2012, 3:36am UTC](https://forum.gbfans.com/t/speakers/11432/19 "2012-07-23T03:36:13Z")
Do you have any pics of your enlosure and how you have it mounted in the pack. ---
**Author:** ![Porturtle](https://forum.gbfans.com/user_avatar/forum.gbfans.com/porturtle/32/4009_2.png) [@Porturtle](https://forum.gbfans.com/u/Porturtle)\ **Post date:** [July 27, 2012, 2:02pm UTC](https://forum.gbfans.com/t/speakers/11432/20 "2012-07-27T14:02:09Z")
> [@tk-fett](#): > > Do you have any pics of your enlosure and how you have it mounted in the pack. I’d be interested in seeing this too. I am about a month out before I add a speaker. But researching options now. [Next page](https://forum.gbfans.com/t/speakers/11432.md?page=2)