# Spirit Halloween Build with printed wand

**URL:** <https://forum.gbfans.com/t/spirit-halloween-build-with-printed-wand/22935>\
**Category:** Fan Props\
**Created:** [February 27, 2021, 11:28am UTC](https://forum.gbfans.com/t/spirit-halloween-build-with-printed-wand/22935 "2021-02-27T11:28:22Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![andybrouwer](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/b77776/32.png) [@andybrouwer](https://forum.gbfans.com/u/andybrouwer)\
**Post date:** [February 27, 2021, 11:28am UTC](https://forum.gbfans.com/t/spirit-halloween-build-with-printed-wand/22935/1 "2021-02-27T11:28:22Z")

</div>

Had bought a spirit pack last Halloween for my son and once I realized how crappy it was and that I could “improve” it greatly I was off and running.

Didn’t realize most parts on GB Fans were sized and intended for a 100% scale but I made it work.

Used the GhostLabs speaker and light kit setup and then merged it with the GB Fans soundboard and wand light/switch kit. Also added a rumble motor into a copper coupling off the front of the wand, which was my own idea, and really like how it turned out.

This is something I’ve thought about a lot over the years but finally took a leap on, so glad I did.

Thanks to this site for all the help and resources!

 ![image](https://discdn.gbfans.com/original/3X/b/5/b542883d84bc26440746120ca493db67ac78297f.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/b/2/b2c923720cf395a53e747389b019a141161dc7d4.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/f/0/f0b6fbef10a14583269ec1c818a955b2a53c2962.jpeg)