# Split loom tubing length??

**URL:** <https://forum.gbfans.com/t/split-loom-tubing-length/24264>\
**Category:** Proton Packs\
**Created:** [June 2, 2012, 9:22am UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264 "2012-06-02T09:22:04Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![Andymac84](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/f6c823/32.png) [@Andymac84](https://forum.gbfans.com/u/Andymac84)\
**Post date:** [June 2, 2012, 9:22am UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/1 "2012-06-02T09:22:04Z")

</div>

What’s the length of the [Split loom tubing](https://www.gbfans.com/wiki/equipment/proton-pack/split-loom) on the proton gun please?? 😊

---

<div class="post-metadata">

**Author:** ![GhostGuy](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/9fc29f/32.png) [@GhostGuy](https://forum.gbfans.com/u/GhostGuy)\
**Post date:** [June 2, 2012, 11:58am UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/2 "2012-06-02T11:58:15Z")

</div>

The part of the hose which is visible, that is, not including what’s inside the handle and inside the pack itself, it around 3.5’ long.

Source:

[http://shawnswift.com/gb/GB2HD/GB2-HD-Ref-006.jpg](http://shawnswift.com/gb/GB2HD/GB2-HD-Ref-006.jpg)

I used this screenshot, scaled it so the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) was 25.9", and drew a bunch of lines to follow the shape of the hose and added up the lengths of all of them.

With that in mind, around 4’ would probably be a good length to cut it to. That’ll give you 3" on either end to stick into the pack and thrower handle. Though you may want to start with 5’ and trim it back. I can’t account for foreshortening of the hose section coming out of the pack and towards the camera.

The shop here does sell it in 6’ lengths though, because many like to make their hoses longer.

---

<div class="post-metadata">

**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\
**Post date:** [June 2, 2012, 12:04pm UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/3 "2012-06-02T12:04:20Z")

</div>

5ft looks pretty cool. You can always take more off if you don’t like it.

---

<div class="post-metadata">

**Author:** ![Andymac84](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/f6c823/32.png) [@Andymac84](https://forum.gbfans.com/u/Andymac84)\
**Post date:** [June 2, 2012, 1:43pm UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/4 "2012-06-02T13:43:04Z")

</div>

This will help me a lot.Thank you very much guys 🆒

---

<div class="post-metadata">

**Author:** ![zombierepellent](https://forum.gbfans.com/user_avatar/forum.gbfans.com/zombierepellent/32/5970_2.png) [@zombierepellent](https://forum.gbfans.com/u/zombierepellent)\
**Post date:** [June 2, 2012, 9:13pm UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/5 "2012-06-02T21:13:41Z")

</div>

Get a 6 foot section if you can, you’ll need about 14" or so for the section between the gearbox/crank gen and that little tube above the clippard valve.

---

<div class="post-metadata">

**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\
**Post date:** [June 3, 2012, 6:39pm UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/6 "2012-06-03T18:39:01Z")

</div>

They sell it in 6ft sections at Walmart in the auto department

---

<div class="post-metadata">

**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\
**Post date:** [June 3, 2012, 6:55pm UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/7 "2012-06-03T18:55:00Z")

</div>

Just making this clear, thrower to pack is 3/4" od and NOT split. It’s corrugated hose, not 3/4" split wire wrap loom. With that in mind I’ve never seen that bagged in any electrical dept of any store other than an electronics surplus store and they had to cut it off.

The only split wire wrap is the 1/4" and none of that is on the thrower.

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [June 3, 2012, 11:34pm UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/8 "2012-06-03T23:34:30Z")

</div>

> [@ProtonCharger](#):
>
> Just making this clear, thrower to pack is 3/4" od and NOT split. It’s corrugated hose, not 3/4" split wire wrap loom.

Can’t speak for all the packs but the GB1 “super” hero pack uses split loom.

---

<div class="post-metadata">

**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\
**Post date:** [June 3, 2012, 11:35pm UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/9 "2012-06-03T23:35:03Z")

</div>

> [@jackdoud](#):
>
> Can’t speak for all the packs but the GB1 “super” hero pack uses split loom.

ew. just ew.

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [June 3, 2012, 11:43pm UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/10 "2012-06-03T23:43:14Z")

</div>

> [@ProtonCharger](#):
>
> ew. just ew.

Going by the pics in the reference section and Vince’s shots from the sony lobby the GB2 stunts and the Murray pack all use split loom too. Where’d you get the idea that solid was ever used?

---

<div class="post-metadata">

**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\
**Post date:** [June 3, 2012, 11:51pm UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/11 "2012-06-03T23:51:25Z")

</div>

aw man! ive never noticed that before! i always assumed that the split tubing was wrong!

---

<div class="post-metadata">

**Author:** ![julz](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/da6949/32.png) [@julz](https://forum.gbfans.com/u/julz)\
**Post date:** [June 4, 2012, 12:10am UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/12 "2012-06-04T00:10:00Z")

</div>

> [@ProtonCharger](#):
>
> aw man! ive never noticed that before! i always assumed that the split tubing was wrong!

And what do people say about making assumptions… 😉

---

<div class="post-metadata">

**Author:** ![gEkX](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gekx/32/6229_2.png) [@gEkX](https://forum.gbfans.com/u/gEkX)\
**Post date:** [June 4, 2012, 12:22am UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/13 "2012-06-04T00:22:36Z")

</div>

I always thought it was split because of the electrical tape wrapped around parts of the loom.

---

<div class="post-metadata">

**Author:** ![ProtonCharger](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/p/e0b2c6/32.png) [@ProtonCharger](https://forum.gbfans.com/u/ProtonCharger)\
**Post date:** [June 4, 2012, 12:31am UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/14 "2012-06-04T00:31:08Z")

</div>

It was split on norm’s plans, but because more accurate plans have come out I thought that was one of the things to change. Oh well split loom is cheap. Sucks I have 20ft of it.

---

<div class="post-metadata">

**Author:** ![kevinj319](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kevinj319/32/187120_2.png) [@kevinj319](https://forum.gbfans.com/u/kevinj319)\
**Post date:** [June 4, 2012, 12:34am UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/15 "2012-06-04T00:34:18Z")

</div>

Yeah, split is accurate but annoying. The split is more likely to kink and creak as it moves and flexes. A lot of people use splitless just because it is more practical. Sometimes practicality trumps accuracy – it’s up to the builder.

---

<div class="post-metadata">

**Author:** ![nickoray](https://forum.gbfans.com/user_avatar/forum.gbfans.com/nickoray/32/7634_2.png) [@nickoray](https://forum.gbfans.com/u/nickoray)\
**Post date:** [January 21, 2015, 2:40am UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/16 "2015-01-21T02:40:10Z")

</div>

Hey guys. I work at Sony and took a trip to the Archives today and got to handle one of the hero packs they have. I believe it’s the same hero pack that Vin took pictures of at the Sony Pictures Plaza lobby, the one on the mannequin w/ [flight suit](https://www.gbfans.com/wiki/equipment/uniform). They removed that so it’s no longer on display. but I got to take a look at it today along with a lot of other things!

I brought a tape measure with me and the length of the loom from the Thrower to the Pack was about 34".

Personally, I thought that may be too short, and maybe looked short while the Thrower was hooked on the pack. Anybody wanna make a 34" loom on their pack and see what it looks like? Haha

---

<div class="post-metadata">

**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\
**Post date:** [January 21, 2015, 6:28am UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/17 "2015-01-21T06:28:50Z")

</div>

About 283 ribs on this image..

---

<div class="post-metadata">

**Author:** ![nickoray](https://forum.gbfans.com/user_avatar/forum.gbfans.com/nickoray/32/7634_2.png) [@nickoray](https://forum.gbfans.com/u/nickoray)\
**Post date:** [January 21, 2015, 6:37am UTC](https://forum.gbfans.com/t/split-loom-tubing-length/24264/18 "2015-01-21T06:37:55Z")

</div>

Wow! Can’t believe you counted.

I was thinking that of course over 30 years, various damage, changes, etc, might’ve been done to the pack, so that’s why it ended up at 34"? Maybe 34" isn’t the original length? I have a photo with it here : [http://instagram.com/p/yGav0sG3UJ/](http://instagram.com/p/yGav0sG3UJ/)
