# studio creations proton pack motherboard? **URL:** \ **Category:** Proton Packs\ **Created:** [August 3, 2014, 7:21am UTC](https://forum.gbfans.com/t/studio-creations-proton-pack-motherboard/35649 "2014-08-03T07:21:04Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![ecto88mph](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/a587f6/32.png) [@ecto88mph](https://forum.gbfans.com/u/ecto88mph)\ **Post date:** [August 3, 2014, 7:21am UTC](https://forum.gbfans.com/t/studio-creations-proton-pack-motherboard/35649/1 "2014-08-03T07:21:04Z")
There might be a topic on here about this but I could not find it. Im building a studio creations [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack). Im looking to buy the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) part. Is there any recommendations for this shell? ---
**Author:** ![Alan\_Hawkins](https://forum.gbfans.com/user_avatar/forum.gbfans.com/alan_hawkins/32/4015_2.png) [@Alan\_Hawkins](https://forum.gbfans.com/u/Alan_Hawkins)\ **Post date:** [August 3, 2014, 1:17pm UTC](https://forum.gbfans.com/t/studio-creations-proton-pack-motherboard/35649/2 "2014-08-03T13:17:12Z")
Some people use MDF (1/4") I use 1/8" plywood used in cabinets. I’m thinking about trying pexiglass and getting it laser cut on my next one. ---
**Author:** ![ecto88mph](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/a587f6/32.png) [@ecto88mph](https://forum.gbfans.com/u/ecto88mph)\ **Post date:** [August 3, 2014, 2:21pm UTC](https://forum.gbfans.com/t/studio-creations-proton-pack-motherboard/35649/3 "2014-08-03T14:21:08Z")
Sadly I do not have the tools or the talent to fabricate my own parts. I have been slowly buying the parts and putting them together. Just wondering if anyone can point me in the direction of a [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) that works with a studio creations shell. ---
**Author:** ![Alan\_Hawkins](https://forum.gbfans.com/user_avatar/forum.gbfans.com/alan_hawkins/32/4015_2.png) [@Alan\_Hawkins](https://forum.gbfans.com/u/Alan_Hawkins)\ **Post date:** [August 3, 2014, 2:29pm UTC](https://forum.gbfans.com/t/studio-creations-proton-pack-motherboard/35649/4 "2014-08-03T14:29:47Z")
I don’t think there is one, since the pack is a bit smaller than a fiberglass shell. If I can get one laser cut then I could offer a run. But I’m just in the “Hey! I got an idea!” phase. ---
**Author:** ![ecto88mph](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/a587f6/32.png) [@ecto88mph](https://forum.gbfans.com/u/ecto88mph)\ **Post date:** [August 11, 2014, 7:17am UTC](https://forum.gbfans.com/t/studio-creations-proton-pack-motherboard/35649/5 "2014-08-11T07:17:48Z")
BUMP How off would a normal [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) be when used with the studio creation shell. I am by no means a purist on accuracy. Im shooting for 85% - 90% accuracy. ---
**Author:** ![Wiz-GB008](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/w/6a8cbe/32.png) [@Wiz-GB008](https://forum.gbfans.com/u/Wiz-GB008)\ **Post date:** [August 11, 2014, 8:43pm UTC](https://forum.gbfans.com/t/studio-creations-proton-pack-motherboard/35649/6 "2014-08-11T20:43:11Z")
I personally have never worked with a SC shell but I have had a few people that used my pumper tell me that the shell is sometimes a hair smaller than normal. So there is a chance a GBfans or MMM board will be on the large size but it should still work. ---
**Author:** ![Lowberg](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/l/46a35a/32.png) [@Lowberg](https://forum.gbfans.com/u/Lowberg)\ **Post date:** [August 12, 2014, 2:18am UTC](https://forum.gbfans.com/t/studio-creations-proton-pack-motherboard/35649/7 "2014-08-12T02:18:18Z")
You should really try to cut your own [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) for it! I know you said you don’t want to but let me encourage you! All you need is a cheap handheld Jig saw (You can pick up a cheap one for about $25) and a board of 1/4" MDF (about $7 at home depot) Just check the reference photos here, all you have to do is trace around the shell for the most part with a sharpie, allowing for the few parts on the motherboard where it’s not right following the shell’s shape. Using a Jig saw is super easy. It cuts at a perfectly straight up and down, and you can go really slow with it to be accurate. The MDF cuts very easily, you could do it yourself in 20 min for less than the cost of any motherboard! Be brave and try it!!! This was my first time using a Jig saw for my SC pack. It’s not perfect but it fits the shell exactly! ---
**Author:** ![ecto88mph](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/a587f6/32.png) [@ecto88mph](https://forum.gbfans.com/u/ecto88mph)\ **Post date:** [August 12, 2014, 3:06am UTC](https://forum.gbfans.com/t/studio-creations-proton-pack-motherboard/35649/8 "2014-08-12T03:06:33Z")
OK I will give it a try. I guess I didn’t realize how cheap a saw could be.