# Studio creations shell.

**URL:** <https://forum.gbfans.com/t/studio-creations-shell/24764>\
**Category:** Proton Packs\
**Created:** [June 5, 2012, 8:10am UTC](https://forum.gbfans.com/t/studio-creations-shell/24764 "2012-06-05T08:10:22Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stantz89](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/a8b319/32.png) [@Stantz89](https://forum.gbfans.com/u/Stantz89)\
**Post date:** [June 5, 2012, 8:10am UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/1 "2012-06-05T08:10:22Z")

</div>

Ok I’m dying to get started on my first pack but unfortunately I’m on a budget. I have been searching the web for the best price on a pack shell and realized early on I couldn’t touch a fiberglass shell right now, which is ok with me because as I said its my first pack so i figured it won’t be perfect so why waste a $300 shell? Well I came across an abs two piece shell from on [studiocreations.com](http://studiocreations.com). I’m not looking for 100% accuracy right now just want to build my first one to play with and learn you know. Just curious as to if anyone has any experience or heard anything about these shells? Input would be greatly appreciated. Thanks in advance.

Sent from my PG86100 using Ghostbusters Fans on Android

---

<div class="post-metadata">

**Author:** ![KCGhostbuster](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/k/a9a28c/32.png) [@KCGhostbuster](https://forum.gbfans.com/u/KCGhostbuster)\
**Post date:** [June 5, 2012, 8:12am UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/2 "2012-06-05T08:12:11Z")

</div>

Here you go: [How bad are Studio Creation's shells? - Proton Packs - GBFans.com](http://www.gbfans.com/community/viewtopic.php?f=2&t=27856)

---

<div class="post-metadata">

**Author:** ![Stantz89](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/a8b319/32.png) [@Stantz89](https://forum.gbfans.com/u/Stantz89)\
**Post date:** [June 5, 2012, 9:15am UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/3 "2012-06-05T09:15:13Z")

</div>

Thanks man.

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [June 5, 2012, 12:38pm UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/4 "2012-06-05T12:38:25Z")

</div>

There are a couple of builds listed in the Index thread: [The Proton Pack Section Index Thread - Proton Packs - GBFans.com](http://www.gbfans.com/community/viewtopic.php?f=2&t=28621)

---

<div class="post-metadata">

**Author:** ![joeghostbuster](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/e99b99/32.png) [@joeghostbuster](https://forum.gbfans.com/u/joeghostbuster)\
**Post date:** [June 5, 2012, 1:07pm UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/5 "2012-06-05T13:07:51Z")

</div>

yeah this will likely be the route I go this summer. I cant justify spending $500-1500 on something I’ll wear once or twice a year.

---

<div class="post-metadata">

**Author:** ![Stantz89](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/a8b319/32.png) [@Stantz89](https://forum.gbfans.com/u/Stantz89)\
**Post date:** [June 5, 2012, 2:04pm UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/6 "2012-06-05T14:04:28Z")

</div>

Oh I know ill where it a lot to show it off and stuff. My big thing is dropping a couple hundred bucks on a nice shell and F’ING it up due to inexperience. So ill start with this…get the hang of it and then go all out on a ■■■■■■■■ pack.

Sent from my PG86100 using Ghostbusters Fans on Android

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [June 5, 2012, 3:14pm UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/7 "2012-06-05T15:14:55Z")

</div>

> [@joeghostbuster](#):
>
> I cant justify spending $500-1500 on something I’ll wear once or twice a year.

Even a semi-accurate pack with some scratchbuilt or “junk” parts will run you around $500, more if you want lights and sound. If you were to completely scratchbuild your pack and thrower out of styrene, buy all resin parts, use inaccurate light lenses, mdf for the [motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) and make your own light kit you’re still looking at $200-$300 and a lot of build time. You could make something pack-shaped for $100 or less as a trial run if you’re worried about messing stuff up but there’s really not much to mess up on a pack, most shells have drill holes marked out. You’d be spending $100 to practice only to want to turn around and make a better one.

---

<div class="post-metadata">

**Author:** ![DarkSpectre](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/958977/32.png) [@DarkSpectre](https://forum.gbfans.com/u/DarkSpectre)\
**Post date:** [June 5, 2012, 5:46pm UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/8 "2012-06-05T17:46:28Z")

</div>

My buddy has the latest version of the SC shell and it turned out pretty decently. My secondary pack is a version 2 shell. Ultimately SC are pretty decent if you’re willing to put the work in. You will run into “soft” details due to the pull but for the price it’s a pretty good starting point. Lightweight and accurate enough for the common person to be impressed by it.

---

<div class="post-metadata">

**Author:** ![irrelevanttomfoolery](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/i/c6cbf5/32.png) [@irrelevanttomfoolery](https://forum.gbfans.com/u/irrelevanttomfoolery)\
**Post date:** [June 11, 2012, 1:17am UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/10 "2012-06-11T01:17:04Z")

</div>

I used a Studio Creations shell for my Nintendo Wii [proton pack](https://www.gbfans.com/wiki/equipment/proton-pack). It needed to be light weight so I could run around in it. Worked well for me.

---

<div class="post-metadata">

**Author:** ![ferrariracerjv7](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ferrariracerjv7/32/186060_2.png) [@ferrariracerjv7](https://forum.gbfans.com/u/ferrariracerjv7)\
**Post date:** [June 11, 2012, 4:31pm UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/11 "2012-06-11T16:31:57Z")

</div>

I would highly recommend a D-42 shell. I have one and my friend got a studiocreations. There are big differences. The D-42 is more detailed.

---

<div class="post-metadata">

**Author:** ![Mintcondition](https://forum.gbfans.com/user_avatar/forum.gbfans.com/mintcondition/32/6303_2.png) [@Mintcondition](https://forum.gbfans.com/u/Mintcondition)\
**Post date:** [October 27, 2012, 11:05pm UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/12 "2012-10-27T23:05:20Z")

</div>

What’s a D-42 shell, and where do you get one?

---

<div class="post-metadata">

**Author:** ![sbonse](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/8797f3/32.png) [@sbonse](https://forum.gbfans.com/u/sbonse)\
**Post date:** [October 28, 2012, 12:30am UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/13 "2012-10-28T00:30:50Z")

</div>

> [@Mintcondition](#):
>
> What’s a D-42 shell, and where do you get one?

I used I D-42 shell and mine came out good I thought. D-42 is a member on her that sells a vacformed shell. You get a 2 piece shell, [ion arm](https://www.gbfans.com/shop/aluminum-welded-ion-arm) and [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper). I don’t know anything about the studio creations shells so I wouldn’t like to comment about them.

If you look in the for sale section you will come across D-42 to purchase a shell.

---

<div class="post-metadata">

**Author:** ![evallded](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/ac8455/32.png) [@evallded](https://forum.gbfans.com/u/evallded)\
**Post date:** [October 28, 2012, 6:35pm UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/14 "2012-10-28T18:35:17Z")

</div>

> [@jackdoud](#):
>
> > [@joeghostbuster](#):
> >
> > I cant justify spending $500-1500 on something I’ll wear once or twice a year.
> 
> Even a semi-accurate pack with some scratchbuilt or “junk” parts will run you around $500, more if you want lights and sound. If you were to completely scratchbuild your pack and thrower out of styrene, buy all resin parts, use inaccurate light lenses, mdf for the motherboard and make your own light kit you’re still looking at $200-$300 and a lot of build time. You could make something pack-shaped for $100 or less as a trial run if you’re worried about messing stuff up but there’s really not much to mess up on a pack, most shells have drill holes marked out. You’d be spending $100 to practice only to want to turn around and make a better one.

This is absolutely the truth, however i will say that if your new to custom building things like this, building a first pack and not trying to spend a lot and make it perfect is a great way to learn how to do it. Theres a big learning curve to building one of these and making it accurate.

---

<div class="post-metadata">

**Author:** ![Ejgunth87](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/c77e96/32.png) [@Ejgunth87](https://forum.gbfans.com/u/Ejgunth87)\
**Post date:** [October 29, 2012, 2:12pm UTC](https://forum.gbfans.com/t/studio-creations-shell/24764/15 "2012-10-29T14:12:53Z")

</div>

I used styrene for my first pack build. I liked the fact that I used this instead of fiberglass with my first pack, because mistakes are bound to happen. It holds up good and it’s lightweight, but not as structurally strong as fiberglass. I am currently building an elite pack with a fiberflass shell and all aluminum parts. I finished building one with fiberglass and resin parts, and that sucka weighed 27 pounds. Talk about back breaking.
