# Styrene build WIP

**URL:** <https://forum.gbfans.com/t/styrene-build-wip/4322>\
**Category:** Proton Packs\
**Created:** [September 22, 2017, 8:44pm UTC](https://forum.gbfans.com/t/styrene-build-wip/4322 "2017-09-22T20:44:55Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![AlexC](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/aeb1de/32.png) [@AlexC](https://forum.gbfans.com/u/AlexC)\
**Post date:** [September 22, 2017, 8:44pm UTC](https://forum.gbfans.com/t/styrene-build-wip/4322/1 "2017-09-22T20:44:55Z")

</div>

[![Imgur](https://discdn.gbfans.com/original/3X/5/6/5672b2070aedf1f0ef0f2f1da028fba025e0e00f.jpeg "Alex Collier has shared 9 photos with you!") ](https://www.flickr.com/photos/155015496@N08/shares/g3835m)

This is my first time using styrene for anything this big. Luckily, there are a lot of sharp angles so it hasn’t been too difficult thus far (looks nervously at [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) plans). Getting the dimensions right has been surprisingly challenging and I’m half considering scrapping what I have and starting again. A few measurements are off. My crank gen is a few Milimetres too short which doesn’t seem like much but my OCD can’t see past it. It’s a fun build tho.

The basic shell will be styrene but everything else will be bought.