# TC kit buildup questions

**URL:** <https://forum.gbfans.com/t/tc-kit-buildup-questions/39084>\
**Category:** Proton Packs\
**Created:** [August 11, 2011, 9:55pm UTC](https://forum.gbfans.com/t/tc-kit-buildup-questions/39084 "2011-08-11T21:55:12Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![addlema](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/8dc957/32.png) [@addlema](https://forum.gbfans.com/u/addlema)\
**Post date:** [August 11, 2011, 9:55pm UTC](https://forum.gbfans.com/t/tc-kit-buildup-questions/39084/1 "2011-08-11T21:55:12Z")

</div>

How long should the back PVC for the rear handle be over all?

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [August 11, 2011, 11:03pm UTC](https://forum.gbfans.com/t/tc-kit-buildup-questions/39084/2 "2011-08-11T23:03:45Z")

</div>

> [@addlema](#):
>
> How long should the back PVC for the rear handle be over all?

![image]([http://www.gbfans.com/images/pb/Xuilress/Ghostbusters\_Proton](http://www.gbfans.com/images/pb/Xuilress/Ghostbusters_Proton) Wand Plans\_RearHandle.jpg)

---

<div class="post-metadata">

**Author:** ![addlema](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/8dc957/32.png) [@addlema](https://forum.gbfans.com/u/addlema)\
**Post date:** [August 12, 2011, 10:37am UTC](https://forum.gbfans.com/t/tc-kit-buildup-questions/39084/3 "2011-08-12T10:37:53Z")

</div>

Awesome Thanks!

---

<div class="post-metadata">

**Author:** ![addlema](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/8dc957/32.png) [@addlema](https://forum.gbfans.com/u/addlema)\
**Post date:** [August 12, 2011, 10:41am UTC](https://forum.gbfans.com/t/tc-kit-buildup-questions/39084/4 "2011-08-12T10:41:14Z")

</div>

Jack , do you have the rest of those plans posted somewhere?

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [August 12, 2011, 3:26pm UTC](https://forum.gbfans.com/t/tc-kit-buildup-questions/39084/5 "2011-08-12T15:26:54Z")

</div>

> [@addlema](#):
>
> Jack , do you have the rest of those plans posted somewhere?

The very first thread in this section is [New Proton Wand Plans](http://www.gbfans.com/community/viewtopic.php?f=2&t=26375)

---

<div class="post-metadata">

**Author:** ![addlema](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/8dc957/32.png) [@addlema](https://forum.gbfans.com/u/addlema)\
**Post date:** [August 16, 2011, 2:18pm UTC](https://forum.gbfans.com/t/tc-kit-buildup-questions/39084/6 "2011-08-16T14:18:44Z")

</div>

So I have drilled out the back part so I can get wires from the [trigger box](https://www.gbfans.com/wiki/equipment/proton-pack/trigger-box) into the main gun body. Should I just drill a hole in the wall between the little box and the gun body?