# TC wand build..

**URL:** <https://forum.gbfans.com/t/tc-wand-build/37541>\
**Category:** Proton Packs\
**Created:** [June 18, 2015, 11:07am UTC](https://forum.gbfans.com/t/tc-wand-build/37541 "2015-06-18T11:07:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![chrisman99](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/b19c9b/32.png) [@chrisman99](https://forum.gbfans.com/u/chrisman99)\
**Post date:** [June 18, 2015, 11:07am UTC](https://forum.gbfans.com/t/tc-wand-build/37541/1 "2015-06-18T11:07:46Z")

</div>

Hey there just started a TC wand build and but can any of you, especially from the UK know where to get a good rear handle.

Plan A was to do it plastic pipe.

TC specifis a size of 1.25" but imperial sizes are hard to come by, so maybe 32mm OD would do, which would be fine if I could actually find any!

All pipe advertised as 32mm is not the outside diameter size. Can’t seem to find anything that will fit. Anyone in the UK maybe recommend a stockist?

---

<div class="post-metadata">

**Author:** ![rays\_occult1](https://forum.gbfans.com/user_avatar/forum.gbfans.com/rays_occult1/32/187148_2.png) [@rays\_occult1](https://forum.gbfans.com/u/rays_occult1)\
**Post date:** [June 18, 2015, 12:09pm UTC](https://forum.gbfans.com/t/tc-wand-build/37541/2 "2015-06-18T12:09:52Z")

</div>

I’d take a look at forward metals on the bay. They are a UK seller who sell alu tubing in both imperial and metric.
