# The dreaded cake pan! **URL:** \ **Category:** Proton Packs\ **Created:** [September 11, 2009, 8:48pm UTC](https://forum.gbfans.com/t/the-dreaded-cake-pan/3242 "2009-09-11T20:48:40Z")\ **Posts on this page:** 6\ **Page:** 2
**Author:** ![Ashman](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ashman/32/221_2.png) [@Ashman](https://forum.gbfans.com/u/Ashman)\ **Post date:** [October 1, 2009, 4:36pm UTC](https://forum.gbfans.com/t/the-dreaded-cake-pan/3242/21 "2009-10-01T16:36:27Z")
Yeah, I used a hole saw to cut the holes in my cake pan. And I cut my “washers” out of For Sale sign plastic which worked just fine. It all gets painted after all… ---
**Author:** ![GhostGuy](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/g/9fc29f/32.png) [@GhostGuy](https://forum.gbfans.com/u/GhostGuy)\ **Post date:** [October 1, 2009, 4:43pm UTC](https://forum.gbfans.com/t/the-dreaded-cake-pan/3242/22 "2009-10-01T16:43:23Z")
The pack uses two different washer sizes. If you look at the reference photos you’ll see the holes in the center of the top and bottom ones are different sizes and the width of the ring around it is different too. I don’t remember the exact measurements we figured out but here’s the washers I found at Fastenal which were closest: 2 1/2" OD 1 3/8" ID 2 1/4" OD 1 1/4" ID You can buy washers there individually. Fastenal is a place for construction guys so it’s usually off the beaten path in industrial areas and the stores aren’t very large or conspicuous. They have a catalog so they can order all sorts of stuff they don’t carry in stock too. I’m sure their website would have a link to it. ---
**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\ **Post date:** [October 1, 2009, 4:48pm UTC](https://forum.gbfans.com/t/the-dreaded-cake-pan/3242/23 "2009-10-01T16:48:28Z")
[http://www.fastenal.com/web/home.ex](http://www.fastenal.com/web/home.ex) ---
**Author:** ![ArtsNFartsNCrafts](https://forum.gbfans.com/user_avatar/forum.gbfans.com/artsnfartsncrafts/32/3988_2.png) [@ArtsNFartsNCrafts](https://forum.gbfans.com/u/ArtsNFartsNCrafts)\ **Post date:** [October 2, 2009, 3:33am UTC](https://forum.gbfans.com/t/the-dreaded-cake-pan/3242/24 "2009-10-02T03:33:58Z")
Went to fastenal during my lunch break. had the exact washers I needed! I also noticed they had [legris](https://www.gbfans.com/wiki/equipment/proton-pack/legris) elbows, but they were black instead of brass… …I thought they looked kind of cool in black…very “ecto chic”. ---
**Author:** ![cpu64](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cpu64/32/104792_2.png) [@cpu64](https://forum.gbfans.com/u/cpu64)\ **Post date:** [October 3, 2009, 12:56am UTC](https://forum.gbfans.com/t/the-dreaded-cake-pan/3242/25 "2009-10-03T00:56:16Z")
> [@SublimeDelusions](#): > > > [@CPU64](#): > > > > I just hate how cake pans have a sharp bend at the edge instead of a curved bend.. I found aluminum pans that have a nice bottom, but there’s a huge logo, pan size, and Made in Taiwan, stamped right on the middle. > > > > Grumble grumble… > > is the logo stamped into the bottom to where you can see it on the inside or only on the outside bottom? If it’s raised, I’d say a dremmel tool could easily grind it down. If it’s depressed in, I’d say a possible filler might work too. Its a thick one, and stamped in. But I decided to go a different route and make my own “pan” as a two piece then weld it together. ---
**Author:** ![ashenis](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/a/ce7236/32.png) [@ashenis](https://forum.gbfans.com/u/ashenis)\ **Post date:** [October 6, 2009, 6:10pm UTC](https://forum.gbfans.com/t/the-dreaded-cake-pan/3242/26 "2009-10-06T18:10:29Z")
I chose not to go with a cake pan and went with another alternative that I found. What I used instead was four 9" wooden sewing hoops and I used good glue to glue them on top of each other (The inner rings only.) I used the outer rings to hold the inner rings in thier circular form while the glue set enough for me to remove the outer rings, but for the rim, I used two of the outer rings after removing the thumb screws and used some putty I got at a gaming store (It’s called Green Stuff and can usually be bought at stores where Games Workshop items are sold. IE tabletop gaming like Warhammer and such.) After all that was glued, I had a circular disk that I got at the craft store as well (hobby lobby) that fit pretty well over the top. [Previous page](https://forum.gbfans.com/t/the-dreaded-cake-pan/3242.md?page=1)