# The Marvelous Accounts of a &quot;Budget&quot; Pack

**URL:** <https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910>\
**Category:** Proton Packs\
**Created:** [October 2, 2010, 1:31am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910 "2010-10-02T01:31:50Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![m\_burkit](https://forum.gbfans.com/user_avatar/forum.gbfans.com/m_burkit/32/187890_2.png) [@m\_burkit](https://forum.gbfans.com/u/m_burkit)\
**Post date:** [October 2, 2010, 1:31am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/1 "2010-10-02T01:31:50Z")

</div>

Hi everyone! Well, since Halloween is quickly approaching, I figured I’d post this to show people you don’t need to drop a few grand to build a nice pack. Back in August, I was commissioned by my friend’s wife to build him a proton pack for his October 1st birthday. The pack would have a budget less then other packs I’ve built for myself, so I set out to try some new things and I wanted to share. The one caveat of this build was I, along with 2 other people, donated parts to the build (mainly real hardware and lights). So I will discuss what you can do to get similar results on a budget.

**The Pack**

The cheapest way to get a “shell” for your proton pack is, honestly, to scratch build it. You can find 4’ x 8’ sheets of styrene on Ebay for $50 shipped. So technically, you could then scratch build a shell from that and some plastic glue for less then $70.

This build had a time limit to it of 2 months so I did not have enough time to completely scratch build a shell. What I opted to do was go with one of Austin’s vacuum formed shells. I chose his shell because it was way cheaper than a fiberglass shell ($150), but I could create a “crisper” looking pack then if I went with any of the other vacuum formed shells that were currently on the market at the time.

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_DSC02654.jpg)

Austin’s shell comes as the basic shape of a proton pack but without any of the detail pieces, such as the ribs, cosmetic plates, EDA Discs, etc. Here is a photo of it shortly after I got it from him. In this photo, I have already begun to clean up the “webbing” (that happens to all vacuum formed proton pack shells) and cut the powercell and [cyclotron](https://www.gbfans.com/wiki/equipment/proton-pack/cyclotron) rings out; attached the cosmetic plates around the sync. gen; attached the [N-Filter](https://www.gbfans.com/wiki/equipment/proton-pack/n-filter); and I have a [bumper](https://www.gbfans.com/wiki/equipment/proton-pack/bumper) just sitting on it, to see how it looks on the shell.

I scratch built the rest of the ribs, discs, and any other detail pieces that are permanently attached to the shell, then primed it.

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_DSC02663.jpg)

So far on this build, its cost less then $200 to get to this point.

Now, an issue that is inherent with using a vacuum form plastic shell is they are flimsy. I’ve seen people reinforce the inside of their shells like this with wood blocks where they could be any stress on the shell. I decided to try something different. With supplies you could get from any auto parts store, my friends and I set out to fiberglass the inside of shell. You can buy a 1/2 gallon fiberglassing kit for less then $20.

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_DSC02664.jpg)

Cost at this point? Around $220.

With the shell fiberglassed and all the detail pieces attached and primed, I moved onto the “tubing” of the pack. I used a combination of Schedule 40 1" PVC pipe and acrylic tube. The PVC is extremely cheap from a hardware store, and I purchased both 2.5" and 2.75" Acrylic tube off ebay in 12" lengths for less than $15 a piece. So it would cost about $40 at most (tubing, plus 1" wood dowel and filler putty) for all the tubing for the pack.

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_DSC02641.jpg)

Everything I capped using the 0.125" styrene mentioned earlier. The [Ion arm](https://www.gbfans.com/shop/aluminum-welded-ion-arm) was also scratch built from that. If you feel up to it, you could also scratch build a bumper from the stuff. The bumper on this build was one of the “donated” parts.

Which now brings us to this:

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_DSC02722.jpg)

On this particular pack, all the hardware, such as the resistors, shock mount, and clippard valve on the pack are real, and were donated to the build. BUT you can easily get all these things in resin for a fraction of the cost of buying the real things. You could easily get all of them in resin for about $15 from Nick-a-tron. The [booster frame](https://www.gbfans.com/wiki/equipment/proton-pack/booster-frame) on this pack is also from Nick.

The [Motherboard](https://www.gbfans.com/wiki/equipment/proton-pack/motherboard) was 1/4" MDF, cut custom for the shell. That was like $5 for the sheet of MDF. The pack was mounted to a LC-2 ALICE Frame, which you can find on ebay relatively cheap as well.

You add $50 for paint and all the hardware (nuts and bolts), $10 for the blue/red acrylic lenses, $30 for the metal ion arm cap, and another $30 for the frame and that brings us up to about $400 for the pack.

**The Neutrona Wand**

I have built a few [proton packs](https://www.gbfans.com/wiki/equipment/proton-pack) so far in my time here in the community. With each build, I like to try something new. My first pack, I scratch built the gun. Second pack: I used a Multimediamayhem gun kit. Third pack: a ThrowingChicken v2 gun kit. With this pack, I wanted to try out Nick-a-tron’s recently redesigned gun kit.

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_p1010214.jpg)

For all things I ordered from Nick, it came to about $200, shipped. His kit comes with all the parts to finish it up. Here’s some construction shots of the gun:

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_DSC02729.jpg)

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_DSC02737.jpg)

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_DSC02747.jpg)

**Bringing It All Together . . .**

So at this point, you dropped about $600 and you have this:

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_DSC02756.jpg)

For labels, I took the Hprop .pdf to Kinkos and had them print it up on sticky paper. I then laminated the one side of the stickers to protect them a little and give them a glossy finish.

The last few things you’d need would be the brass clippard hardware, a [ribbon cable](https://www.gbfans.com/wiki/equipment/proton-pack/ribbon-cable) and the clamps for that. You can get those from a variety of places, such as the GBfans store or multimediamayhem and won’t cost you much from either.

So with the last of the parts you need attached, along with you spiffy self made labels, your “budget” pack should be looking something like this:

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_DSC02766.jpg)

![image]([http://www.gbfans.com/images/pb/mburkit/Commissioned](http://www.gbfans.com/images/pb/mburkit/Commissioned) Pack Build\_DSC02765.jpg)

So now you have a proton pack that you built yourself that looks just as nice as some of the packs that people drop over a grand for! Is it really a “budget” pack? Not really, because to get to this point it would have cost you probably about $700 dollars. There are cheaper ways of going about it but with a time limit and a price range to work in, this is what I came up with. A lot of the small details are where you start to get nickel and dimed. And it adds up. But you can’t argue with the results.

So that’s my little adventure with building a commissioned pack on a budget. Did the one pictured here cost this much? It cost less but also had a lot of parts donated to it, making it worth a lot more then what was paid for it. I wrote this up to give people alternate ideas for getting their own packs done and to give them idea of how it can look. Take away from that what you will. Anyway, thanks for reading!

---

<div class="post-metadata">

**Author:** ![Filandrius](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/839c29/32.png) [@Filandrius](https://forum.gbfans.com/u/Filandrius)\
**Post date:** [October 2, 2010, 1:38am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/2 "2010-10-02T01:38:27Z")

</div>

This was an extremely interesting read to say the least. That pack looks like a 1400$ pack, not a 700$. 🙂

Newbies, pay attention! This is how you do it. 😃

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [October 2, 2010, 2:01am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/3 "2010-10-02T02:01:55Z")

</div>

I was one of the assistants on this build and I gotta say, even with all the donated real parts and a higher-end pack shell a lot of what makes this pack nice is the amount of time and work Matt put into it. I had my doubts initially on the final quality of the build when we were fiberglassing and cleaning up the shell but after putting the time into it Matt turned mostly mediocre parts into an excellent finished product. Still, the hardest part was probably not talking about it and tipping off the recipient. 😉

---

<div class="post-metadata">

**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/188008_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\
**Post date:** [October 2, 2010, 2:02am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/4 "2010-10-02T02:02:35Z")

</div>

I’ll take one.

---

<div class="post-metadata">

**Author:** ![m\_burkit](https://forum.gbfans.com/user_avatar/forum.gbfans.com/m_burkit/32/187890_2.png) [@m\_burkit](https://forum.gbfans.com/u/m_burkit)\
**Post date:** [October 2, 2010, 2:09am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/5 "2010-10-02T02:09:11Z")

</div>

Yeah, I don’t normally do commission builds. The ONLY reason I built this one was because it was for a friend’s birthday. So unless you are my friend and its for your birthday . . . I’m not making you one.

---

<div class="post-metadata">

**Author:** ![DentArthurDent](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/d/ee7513/32.png) [@DentArthurDent](https://forum.gbfans.com/u/DentArthurDent)\
**Post date:** [October 2, 2010, 2:31am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/6 "2010-10-02T02:31:44Z")

</div>

ill take 3

:roland:

---

<div class="post-metadata">

**Author:** ![ChapterMasterTuShan](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@ChapterMasterTuShan](https://forum.gbfans.com/u/ChapterMasterTuShan)\
**Post date:** [October 2, 2010, 2:34am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/7 "2010-10-02T02:34:03Z")

</div>

Matt, make me a pack for Christmas.

I was the other “friend,” and was dubious about how the end product would be, but it looks damn good.

Not elite-good, but good. 😛

---

<div class="post-metadata">

**Author:** ![EDFX](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/c57346/32.png) [@EDFX](https://forum.gbfans.com/u/EDFX)\
**Post date:** [October 3, 2010, 5:59pm UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/8 "2010-10-03T17:59:08Z")

</div>

That’s my pack! That’s my pack!

Yes, Matt did an AMAZING job and I have to admit it was the best birthday ever! TOTALLY SUPRISED!!!

And thanks to Jack and Adam for their donations and assistance. I owe you all!

Thanks Matt!

---

<div class="post-metadata">

**Author:** ![Gareee](https://forum.gbfans.com/user_avatar/forum.gbfans.com/gareee/32/5994_2.png) [@Gareee](https://forum.gbfans.com/u/Gareee)\
**Post date:** [October 3, 2010, 6:11pm UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/9 "2010-10-03T18:11:10Z")

</div>

This came out great! I really think this is the best way to do vac shells.. leave off the details, and let the builder get finer detail on the build.

---

<div class="post-metadata">

**Author:** ![stroudy](https://forum.gbfans.com/user_avatar/forum.gbfans.com/stroudy/32/6713_2.png) [@stroudy](https://forum.gbfans.com/u/stroudy)\
**Post date:** [October 3, 2010, 7:46pm UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/10 "2010-10-03T19:46:38Z")

</div>

Cracking pack. Kudos!

---

<div class="post-metadata">

**Author:** ![shodanmark](https://forum.gbfans.com/user_avatar/forum.gbfans.com/shodanmark/32/6715_2.png) [@shodanmark](https://forum.gbfans.com/u/shodanmark)\
**Post date:** [October 3, 2010, 8:31pm UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/11 "2010-10-03T20:31:10Z")

</div>

Really, really nice work. That’s a great looking pack. You can’t even tell it’s vac-formed with the final product. I’d be proud to wear that!

---

<div class="post-metadata">

**Author:** ![nick-a-tron](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/fbc32d/32.png) [@nick-a-tron](https://forum.gbfans.com/u/nick-a-tron)\
**Post date:** [October 4, 2010, 12:14am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/12 "2010-10-04T00:14:13Z")

</div>

This build has everything! Matt you did a great job and the fact you made it for your friend really adds to the awsomeness 😃 EDFX you are one lucky guy!

---

<div class="post-metadata">

**Author:** ![m\_burkit](https://forum.gbfans.com/user_avatar/forum.gbfans.com/m_burkit/32/187890_2.png) [@m\_burkit](https://forum.gbfans.com/u/m_burkit)\
**Post date:** [October 4, 2010, 1:19pm UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/13 "2010-10-04T13:19:48Z")

</div>

Thanks Nick. Your gun kit definitely helped out with the pack’s awesomeness.

---

<div class="post-metadata">

**Author:** ![EDFX](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/c57346/32.png) [@EDFX](https://forum.gbfans.com/u/EDFX)\
**Post date:** [October 5, 2010, 2:38am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/14 "2010-10-05T02:38:12Z")

</div>

For anyone who is interested, I posted a write-up about how this was The Best Birthday Ever because of what Matt did.

[http://www.edfx.com/blog/?p=929](http://www.edfx.com/blog/?p=929)

---

<div class="post-metadata">

**Author:** ![system](https://discdn.gbfans.com/original/2X/c/c5b3f4ae5c26d244057cd203721288eccc8b8ad6.png) [@system](https://forum.gbfans.com/u/system)\
**Post date:** [October 6, 2010, 11:21am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/15 "2010-10-06T11:21:23Z")

</div>

For a budget pack that sure looks nice!

---

<div class="post-metadata">

**Author:** ![Charlie\_Richter](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/4af34b/32.png) [@Charlie\_Richter](https://forum.gbfans.com/u/Charlie_Richter)\
**Post date:** [October 6, 2010, 12:08pm UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/16 "2010-10-06T12:08:35Z")

</div>

I’ll take a Xbox controller.

---

<div class="post-metadata">

**Author:** ![tk-fett](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/a87d85/32.png) [@tk-fett](https://forum.gbfans.com/u/tk-fett)\
**Post date:** [July 20, 2012, 8:25pm UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/17 "2012-07-20T20:25:04Z")

</div>

How strong is this method of reinforcement, will there be any danger of the wand breaking the shell after it’s backed by fiberglass?

How has it held up the past few years?

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [July 21, 2012, 2:00am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/18 "2012-07-21T02:00:13Z")

</div>

It’s pretty much the best method of reinforcement for this type of pack shell. There should be no danger of the wand breaking the shell baring drunken accidents or oblivious morons. Hopefully Ed will pop in to give the current status of the pack but it looked fine to me when I saw it in June.

---

<div class="post-metadata">

**Author:** ![EDFX](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/e/c57346/32.png) [@EDFX](https://forum.gbfans.com/u/EDFX)\
**Post date:** [July 21, 2012, 3:13am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/19 "2012-07-21T03:13:35Z")

</div>

Did Jack just call me a drunken and oblivious moron? Ha Ha!

The pack is perfect, nothing has broken or come apart! Love it!

---

<div class="post-metadata">

**Author:** ![aj-quick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/aj-quick/32/188008_2.png) [@aj-quick](https://forum.gbfans.com/u/aj-quick)\
**Post date:** [July 21, 2012, 3:30am UTC](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910/20 "2012-07-21T03:30:01Z")

</div>

https://www.youtube.com/embed/icSxe9zScGE?feature=oembed&wmode=opaque

[Next page](https://forum.gbfans.com/t/the-marvelous-accounts-of-a-quot-budget-quot-pack/39910.md?page=2)
