# Toggle Switches for Nutrino Wand

**URL:** <https://forum.gbfans.com/t/toggle-switches-for-nutrino-wand/19472>\
**Category:** Proton Packs\
**Created:** [November 22, 2014, 2:59pm UTC](https://forum.gbfans.com/t/toggle-switches-for-nutrino-wand/19472 "2014-11-22T14:59:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ecto79](https://forum.gbfans.com/user_avatar/forum.gbfans.com/ecto79/32/5924_2.png) [@ecto79](https://forum.gbfans.com/u/ecto79)\
**Post date:** [November 22, 2014, 2:59pm UTC](https://forum.gbfans.com/t/toggle-switches-for-nutrino-wand/19472/1 "2014-11-22T14:59:38Z")

</div>

I have been searching the forums and haven’t come across a specific answer. I’m sure it’s personal preference as well. But I was curious what type of toggle switches I would need? I have exorays light kit installed. But I would like some bigger switches. They just seem a little small to me. I have seen they sell them at radio shack. So I just wanted to make sure I have the right ones.

---

<div class="post-metadata">

**Author:** ![thebigone2087](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/t/d6d6ee/32.png) [@thebigone2087](https://forum.gbfans.com/u/thebigone2087)\
**Post date:** [November 22, 2014, 3:51pm UTC](https://forum.gbfans.com/t/toggle-switches-for-nutrino-wand/19472/2 "2014-11-22T15:51:22Z")

</div>

I am not 100% sure on the Exoray kit, but usually you just need SPST toggle switches. Some kits use DPDT (6 connectors on the back of the switch) but the GBFans kit uses SPST. The smaller switches I believe are more accurate to the screen used props to standard size switches. I just installed some of the “micro” switches the Shop offered to work with the GBFans kit and the ThrowingChicken thrower and they look much more accurate than the normal switches.