# Trap part question **URL:** \ **Category:** Ghost Traps\ **Created:** [May 7, 2008, 12:31am UTC](https://forum.gbfans.com/t/trap-part-question/21333 "2008-05-07T00:31:54Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![SolidGoldCaddy](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/df705f/32.png) [@SolidGoldCaddy](https://forum.gbfans.com/u/SolidGoldCaddy)\ **Post date:** [May 7, 2008, 12:31am UTC](https://forum.gbfans.com/t/trap-part-question/21333/1 "2008-05-07T00:31:54Z")
What does everyone use for the rubber boot piece that goes under the pedal on the trap pedal? Also please include what store you got it from, and possibly a name of the product. I looked at a few places and all I found was hard plastic drain hose. Thanks ---
**Author:** ![Cythusly](https://forum.gbfans.com/user_avatar/forum.gbfans.com/cythusly/32/188_2.png) [@Cythusly](https://forum.gbfans.com/u/Cythusly)\ **Post date:** [May 7, 2008, 5:49pm UTC](https://forum.gbfans.com/t/trap-part-question/21333/2 "2008-05-07T17:49:47Z")
I don’t know what other people use, but I’m heading to Home Depot to buy some flexible vinyl dryer hose close to the right diameter. ![image](https://discdn.gbfans.com/original/3X/b/2/b261724092aa7a31fbb671a60161b80666f12e3c.jpeg) I was gonna look for black, but I’ll probably just end up with the white and hit it with some black spray. Hope that helps! -Tyler ---
**Author:** ![SolidGoldCaddy](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/df705f/32.png) [@SolidGoldCaddy](https://forum.gbfans.com/u/SolidGoldCaddy)\ **Post date:** [May 7, 2008, 10:55pm UTC](https://forum.gbfans.com/t/trap-part-question/21333/3 "2008-05-07T22:55:00Z")
I couldnt find any smaller than 3" Let me know if you find any and post the sku from Home Depot Does anyone know what is screen accurate? ---
**Author:** ![irricanian](https://forum.gbfans.com/user_avatar/forum.gbfans.com/irricanian/32/5887_2.png) [@irricanian](https://forum.gbfans.com/u/irricanian)\ **Post date:** [May 7, 2008, 11:26pm UTC](https://forum.gbfans.com/t/trap-part-question/21333/4 "2008-05-07T23:26:56Z")
I’ve been using sump pump drain hose 2" diameter , I know it’s not accurate but its readily available. CV joint boots or half shaft boots can also be used, not sure what was used on screen used props. Here’s another possibility > **[Gortite® Protective Covers & Doors | Dynatect Brand](https://dynatect.com/brand/gortite/)** > > The Gortite® brand leads in bellows, roll-up covers, and doors for equipment protection across automation, mining, medical, transport, and more. ---
**Author:** ![SolidGoldCaddy](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/df705f/32.png) [@SolidGoldCaddy](https://forum.gbfans.com/u/SolidGoldCaddy)\ **Post date:** [May 8, 2008, 12:08pm UTC](https://forum.gbfans.com/t/trap-part-question/21333/5 "2008-05-08T12:08:43Z")
Anymore ideas? I am only missing this and the connector on the d sub hood. ---
**Author:** ![flynn](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/f/e56c9b/32.png) [@flynn](https://forum.gbfans.com/u/flynn)\ **Post date:** [May 8, 2008, 11:46pm UTC](https://forum.gbfans.com/t/trap-part-question/21333/6 "2008-05-08T23:46:12Z")
I use 2" diameter heater vent hose from Autozone. Closest thing I’ve found. Just make sure it’s the black flexible plastic not the not really flexible silver foil/paper kind. Edit- added: As a side note, I have a remote control car suspension spring inside the vent hose to push the pedal itself back up. ---
**Author:** ![SolidGoldCaddy](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/df705f/32.png) [@SolidGoldCaddy](https://forum.gbfans.com/u/SolidGoldCaddy)\ **Post date:** [May 8, 2008, 11:58pm UTC](https://forum.gbfans.com/t/trap-part-question/21333/7 "2008-05-08T23:58:32Z")
> [@flynn](#): > > I use 2" diameter heater vent hose from Autozone. Closest thing I’ve found. Just make sure it’s the black flexible plastic not the not really flexible silver foil/paper kind. > > Edit- added: As a side note, I have a remote control car suspension spring inside the vent hose to push the pedal itself back up. Yeah I have a screen door spring chopped to fit. I just needed the boot cover. Thanks ---
**Author:** ![SolidGoldCaddy](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/s/df705f/32.png) [@SolidGoldCaddy](https://forum.gbfans.com/u/SolidGoldCaddy)\ **Post date:** [May 25, 2008, 2:15pm UTC](https://forum.gbfans.com/t/trap-part-question/21333/8 "2008-05-25T14:15:48Z")
> [@flynn](#): > > I use 2" diameter heater vent hose from Autozone. Closest thing I’ve found. Just make sure it’s the black flexible plastic not the not really flexible silver foil/paper kind. > > Edit- added: As a side note, I have a remote control car suspension spring inside the vent hose to push the pedal itself back up. Can you tell me what department in autozone or what it was by? I looked and couldnt find anything. Thanks