# Trap Pedal Work

**URL:** <https://forum.gbfans.com/t/trap-pedal-work/14516>\
**Category:** Ghost Traps\
**Created:** [August 1, 2018, 12:06am UTC](https://forum.gbfans.com/t/trap-pedal-work/14516 "2018-08-01T00:06:34Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![necrosapien87](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/c37758/32.png) [@necrosapien87](https://forum.gbfans.com/u/necrosapien87)\
**Post date:** [August 1, 2018, 12:06am UTC](https://forum.gbfans.com/t/trap-pedal-work/14516/1 "2018-08-01T00:06:34Z")

</div>

So, I’m working on making a trap pedal and was wondering how to attach the flex tube “spring” to the bottom of the pedal since the pedal plate is metal.

---

<div class="post-metadata">

**Author:** ![kingpin](https://forum.gbfans.com/user_avatar/forum.gbfans.com/kingpin/32/188026_2.png) [@kingpin](https://forum.gbfans.com/u/kingpin)\
**Post date:** [August 1, 2018, 4:24pm UTC](https://forum.gbfans.com/t/trap-pedal-work/14516/2 "2018-08-01T16:24:53Z")

</div>

You could glue a jar lid, or a round piece of wood or MDF, around the width of the spring, to the underside of the Trap pedal. You can either just leave a friction fit in place to secure the spring, or you could look into whether the two items could be glued, or zip-tied together.

---

<div class="post-metadata">

**Author:** ![glenn-frederick](https://forum.gbfans.com/user_avatar/forum.gbfans.com/glenn-frederick/32/188091_2.png) [@glenn-frederick](https://forum.gbfans.com/u/glenn-frederick)\
**Post date:** [August 1, 2018, 5:16pm UTC](https://forum.gbfans.com/t/trap-pedal-work/14516/3 "2018-08-01T17:16:59Z")

</div>

Is the Tube Spring like the one Countspatula sells?

You could have that piece 3D printed from his files then tap and screw it on to the aluminum.

---

<div class="post-metadata">

**Author:** ![necrosapien87](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/n/c37758/32.png) [@necrosapien87](https://forum.gbfans.com/u/necrosapien87)\
**Post date:** [August 1, 2018, 11:49pm UTC](https://forum.gbfans.com/t/trap-pedal-work/14516/4 "2018-08-01T23:49:19Z")

</div>

> [@Glenn Frederick](#):
>
> Is the Tube Spring like the one Countspatula sells?
> 
> You could have that piece 3D printed from his files then tap and screw it on to the aluminum.

I was planning to use 2inch air duct hose.