# Velleman Kits..

**URL:** <https://forum.gbfans.com/t/velleman-kits/6522>\
**Category:** Proton Packs\
**Created:** [September 16, 2014, 3:14pm UTC](https://forum.gbfans.com/t/velleman-kits/6522 "2014-09-16T15:14:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![polly](https://forum.gbfans.com/user_avatar/forum.gbfans.com/polly/32/19197_2.png) [@polly](https://forum.gbfans.com/u/polly)\
**Post date:** [September 16, 2014, 3:14pm UTC](https://forum.gbfans.com/t/velleman-kits/6522/1 "2014-09-16T15:14:50Z")

</div>

I am looking at purchasing a couple of velleman kits, MK102, MK107, and MK173 like the ones that are in some [Kenner](https://www.gbfans.com/wiki/real-ghostbusters/kenner-10410) Toy [Proton Packs](https://www.gbfans.com/wiki/equipment/proton-pack). I don`t know much about electronics but I am wondering how you would wire all three of those kits together so all you need is one power supply (9V battery). Any suggestions would be appreciated.

---

<div class="post-metadata">

**Author:** ![jackdoud](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/j/6a8cbe/32.png) [@jackdoud](https://forum.gbfans.com/u/jackdoud)\
**Post date:** [September 16, 2014, 3:41pm UTC](https://forum.gbfans.com/t/velleman-kits/6522/2 "2014-09-16T15:41:09Z")

</div>

They’re all discrete electronics so you should be able to run them all in parallel with a single 9v. You’d be better off building an accurate circuit on a breadboard using the schematic in the tutorials section though.

---

<div class="post-metadata">

**Author:** ![polly](https://forum.gbfans.com/user_avatar/forum.gbfans.com/polly/32/19197_2.png) [@polly](https://forum.gbfans.com/u/polly)\
**Post date:** [September 16, 2014, 4:13pm UTC](https://forum.gbfans.com/t/velleman-kits/6522/3 "2014-09-16T16:13:09Z")

</div>

Thanks for your help on this. I will also look at the tutorial as well.
