# Walmart Ghost trap mech box disassembly with pictures

**URL:** <https://forum.gbfans.com/t/walmart-ghost-trap-mech-box-disassembly-with-pictures/14782>\
**Category:** Ghost Traps\
**Created:** [May 9, 2020, 4:01am UTC](https://forum.gbfans.com/t/walmart-ghost-trap-mech-box-disassembly-with-pictures/14782 "2020-05-09T04:01:43Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![notsabbat](https://forum.gbfans.com/user_avatar/forum.gbfans.com/notsabbat/32/188412_2.png) [@notsabbat](https://forum.gbfans.com/u/notsabbat)\
**Post date:** [May 9, 2020, 4:01am UTC](https://forum.gbfans.com/t/walmart-ghost-trap-mech-box-disassembly-with-pictures/14782/1 "2020-05-09T04:01:43Z")

</div>

Hello; I know there are already a bunch of threads about this trap, but I wanted to put all the disassembly stuff in one place so it doesnt get buried in other posts. I have a feeling this trap will generate a lot of mods in the future.

I was lucky enough to be able to purchase 2 traps. My end goal is to mod one of them with an arduino board, but to do that I had to know how the mechanism that opened the doors worked. I opened one of my traps up and took apart the mechanical box and documented it so others (hopefully) wont have to do the same.

First off; here is a super informative video by our own Carldacorte that shows the basic breakdown of the trap.

[![](https://discdn.gbfans.com/original/3X/f/0/f0abb4e919f48231d0e42fc83c35b321c614413f.jpeg "Walmart Ghostbusters Ghost Trap Unboxing, Review, and Disassembly!") ](https://www.youtube.com/watch?v=qVL5a_gd9PQ)

The pedal is very easy to take apart if you are so inclined. The is just a plastic pin that holds it on.

 ![image](https://discdn.gbfans.com/original/3X/c/e/ceded4309fab331fe7023085759dada9e73c6e0d.jpeg)

 ![image](https://discdn.gbfans.com/original/3X/8/d/8d297d190261925487c02d020d1164031b6bc1cb.jpeg)

The part I am most interested in is the mechanical box in the trap. It is completely self contained and can easily be removed from the trap as seen in Carldacorte’s video. In the future I hope to mod the Charlesworth 3d printed files so that it can use the gearbox in it, but thats still a bit away.

The box taken apart; there a re a lot of gears in there:

 ![image](https://discdn.gbfans.com/original/3X/2/c/2cf8b23a17b24320b06f7a25b11b636a5d292415.jpeg)

Here is a close up of how the gears are stacked. All the gears seem to be the same. So if you take it apart and have a gear explosion you can use this as a guide to get it back together again.

 ![image](https://discdn.gbfans.com/original/3X/e/6/e611ba17ee30ede7fa671c5596b5bc0f5e230823.jpeg)

Here is how it all works;

There is a little piece that slides up and down:

 ![image](https://discdn.gbfans.com/original/3X/a/3/a35fc16b29e4e6ec7ce85ccd8b64f70284c7850f.jpeg)

That little part at the top with the gears that move the doors?

 ![image](https://discdn.gbfans.com/original/3X/8/e/8e9015a484aa139b0599fd1250e92815ce300405.jpeg)

It has little levers that are moved by the part that moves up and down. When those levers are moved, the gears turn and thats what opens the doors:

 ![image](https://discdn.gbfans.com/original/3X/b/7/b7b4b9937416f0a004f3374b2a4845490409d619.jpeg)

Here is a picture of the motor side of the gearbox. it has the track that the up/down moving part moves on.

 ![9A4JplG](https://discdn.gbfans.com/original/3X/6/0/602e6501413a9d8d9ca69a45fd4fc3d209dd1320.jpeg)  
There are limiter switches at the top and the bottom of mechanical box. The motor will turn until the limiters are tripped depending on which direction the part that goes up in down is travelling. Either the top limiter if it is going up or the bottom limiter if it is going down; tripping the top limiter will not stop motor if it is going down and visa versa.

Here is a picture of the control board with everything connected to it:

 ![image](https://discdn.gbfans.com/original/3X/d/5/d5936bbe95dcca099f724998ba8297bdf6e75aa3.jpeg)

Here is were the various pins go:

 ![image](https://discdn.gbfans.com/original/3X/e/2/e28341db63294b93bf93392904074effa3d24edf.jpeg)

Since it it all very basic electronics, it should be relatively simple for someone proficient with Arduino building to connect the components to an arduino for more precise control.

And now for a fun video of the (somewhat) 3d printed pedal from Sean Charlesworth that I added as well as a cool video from Punished props about improving the look of the spirit trap, which will also apply to this trap since they are nearly identical.

[![](https://discdn.gbfans.com/original/3X/8/c/8ce15f971b6205c9c1d3eff077b0d5e655cafb50.jpeg "Walmart Ghostrap with Charleswort Dynamics pedal mod") ](https://www.youtube.com/watch?v=UxOwB6yujOQ)

Punished props [Ghost Trap](https://www.gbfans.com/wiki/equipment/ghost-trap):

[![](https://discdn.gbfans.com/original/3X/f/3/f3c55133dfb5332aa669233ebc07472ec29e78ef.jpeg "Spirit Halloween Ghost Trap Mod + Repaint") ](https://www.youtube.com/watch?v=YSFk37MEUYc)

_edit_

Sean Charlesworts guides to building the Ghost Trap and [Ghost Trap Pedal](https://www.gbfans.com/wiki/equipment/ghost-trap/pedal)

> **[KIT INSTRUCTIONS](https://opus5.complex88.com/2013/08/instructions.html)**
>
> Here you will find assembly instructions for most of my kits.  Some projects can be downloaded and 3D printed at home. Contact me with any ...

---

<div class="post-metadata">

**Author:** ![Carldacorte](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/dec6dc/32.png) [@Carldacorte](https://forum.gbfans.com/u/Carldacorte)\
**Post date:** [May 10, 2020, 2:50pm UTC](https://forum.gbfans.com/t/walmart-ghost-trap-mech-box-disassembly-with-pictures/14782/2 "2020-05-10T14:50:19Z")

</div>

Great post!

I just finished building my pedal using the Sean Charlesworth parts/ plans. Can you show your switch mechanism in the pedal? Did you follow the original design/ plans?

---

<div class="post-metadata">

**Author:** ![notsabbat](https://forum.gbfans.com/user_avatar/forum.gbfans.com/notsabbat/32/188412_2.png) [@notsabbat](https://forum.gbfans.com/u/notsabbat)\
**Post date:** [May 10, 2020, 7:20pm UTC](https://forum.gbfans.com/t/walmart-ghost-trap-mech-box-disassembly-with-pictures/14782/3 "2020-05-10T19:20:24Z")

</div>

> [@Carldacorte post\_id=4934592 time=1589122219 user\_id=51582](#):
>
> Great post!
> 
> I just finished building my pedal using the Sean Charlesworth parts/ plans. Can you show your switch mechanism in the pedal? Did you follow the original design/ plans?

Thank you!

Sure:

 ![image](https://discdn.gbfans.com/original/3X/c/f/cf262ca44e9b6e81b9490235f6b1c0c9cdf47a50.jpeg)

I used these switches:

> **[open prime modal](https://www.amazon.com/clp/B00MFRMFS6?tag=gbfans-discourse-20)**
>
> Amazon.com: URBEST AC 250V 5A SPDT 1NO 1NC Momentary Hinge Roller Lever Micro Switches 3 Pins 10 Pcs : Industrial & Scientific

You can tell that I bent the switch up a little bit, but Im not sure if I really needed to. The only thing I did different was I used a slightly different nozzle fitting, which turned out to not be a good idea.

Links in this post may be affiliate links. Purchases made through them help support this site at no additional cost to you.

---

<div class="post-metadata">

**Author:** ![dartdemon340](https://forum.gbfans.com/user_avatar/forum.gbfans.com/dartdemon340/32/183438_2.png) [@dartdemon340](https://forum.gbfans.com/u/dartdemon340)\
**Post date:** [December 31, 2022, 5:38pm UTC](https://forum.gbfans.com/t/walmart-ghost-trap-mech-box-disassembly-with-pictures/14782/4 "2022-12-31T17:38:37Z")

</div>

Stupid question, but has anyone 3d modeled that gear box assembly yet? Be nice to print that assembly out to use in the tons of Spirit Traps since I think you can just add it in to get the auto door opening. If I could get my hands on that gear box I’d gladly 3d model it for STL printing but I’m not paying 100+ one.
