# Wire switches using Amplified sound board?

**URL:** <https://forum.gbfans.com/t/wire-switches-using-amplified-sound-board/15571>\
**Category:** Proton Packs\
**Created:** [June 15, 2020, 5:07am UTC](https://forum.gbfans.com/t/wire-switches-using-amplified-sound-board/15571 "2020-06-15T05:07:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Captain\_Howdy1444](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/c/9f8e36/32.png) [@Captain\_Howdy1444](https://forum.gbfans.com/u/Captain_Howdy1444)\
**Post date:** [June 15, 2020, 5:07am UTC](https://forum.gbfans.com/t/wire-switches-using-amplified-sound-board/15571/1 "2020-06-15T05:07:20Z")

</div>

I would like to wire my own switches for the wand to the GBfans Amplified sound board so I can play around with all of its functions. I don’t have plans to buy the wand light kit because I’m waiting until my [Egon Spengler](https://www.gbfans.com/wiki/characters/egon-spengler) wand comes in this September then figure out how to wire that as my Thrower. As far as wiring the temporary switches, the speakers and a temporary battery(I’ve already ordered the GBfans battery pack but it wont be here for a month or so), what size/type of wires should I use for each. Also, did anyone get any instructions on how to use the different functions for the Amplified Battery Pack or a link to someone who has made an easy layout explaining all the different ways it can be used?

---

<div class="post-metadata">

**Author:** ![Miranda](https://forum.gbfans.com/letter_avatar_proxy/v4/letter/m/34f0e0/32.png) [@Miranda](https://forum.gbfans.com/u/Miranda)\
**Post date:** [September 23, 2020, 8:01pm UTC](https://forum.gbfans.com/t/wire-switches-using-amplified-sound-board/15571/2 "2020-09-23T20:01:25Z")

</div>

I was thinking of doing the same thing but I don’t know how to take it apart carefully, it is made of plastic
